@article { author = {Saber-Samandari, Sabersamandari}, title = {Plasma sprayed nano-hydroxyapatite coatings on titanium alloys}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1407-1413}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.1}, abstract = {Titanium alloys due to have excellent mechanical and biological properties can be a good replacement for bone tissues. However, lack of appropriate bonding between bone and titanium implant leads to separation from the bone. Also hydroxyapatite can be the best material for bone replacing due to chemical and structural similarity to mineral part of bone and good biocompatibility. One cannot use them in load-bearing sites such as bone and teeth due to poor mechanical properties. So the best way for producing biomedical implants is taking advantages of good mechanical properties of titanium implants and biological properties of hydroxyapatite. Therefore hydroxyapatite particles will be coated on titanium or its alloy substrates.  In this study hydroxyapatite powder particles coated on titanium alloy substrate. Plasma sprays coating method due to its good properties, easy operation and low cost, will be used in commercial hydroxyapatite coating on the substrate implant. The problems of hydroxyapatite coating using this method are: formation of other calcium phosphate phases, poor adhesion of the coating and the substrate، formation of micro-cracks in the coating due to residual stresses caused by the high temperature process.  To this end, hydroxyapatite has been coated on pre-heated titanium alloy in order to improving hydroxyapatite properties. Results indicate that residual stresses decreases in interface and adhesion improved by pre heating substrate.}, keywords = {Hydroxyapatite,Titanium alloy,Plasma spray coating,Pre-heating substrate,Post Heat-treatment}, title_fa = {پوشش دهی نانو ذرات هیدروکسی آپاتیت بر روی زیرلایه آلیاژتیتانیوم به روش پلاسما اسپری}, abstract_fa = {در این پژوهش ذرات پودری هیدروکسی آپاتیت بر روی زیرلایه آلیاژ تیتانیوم پوشش داده شد. روش پلاسما اسپری به علت ایجاد پوشش با خواص مکانیکی مناسب، کاربرد آسان و هزینه پایی نتر، روش تجاری پوشش دهی هیدروکسی آپاتیت بر روی زیرلایه فلزی کاشتنی است. مشکل پوشش هیدروکسی آپاتیت تهیه شده به روش پلاسما اسپری، تجزیه هیدروکسی آپاتیت، تشکیل سایر فازهای کلسیم فسفاتی، چسبندگی ضعیف به زیر لایه و ایجاد میکرو ترک در پوشش به علت تن شهای پسماند ناشی از دمای بالای فرایند است. به منظور بهبود خواص هیدروکسی آپاتیت، آلیاژ تیتانیوم پیش گرم شده و سپس پوشش هیدروکسی آپاتیت بر روی آن اعمال شد. نتایج نشان داد با پیش گرم کردن زیرلایه تن شهای پسماند در فصل مشترک کاهش یافت و چسبندگی نیز بهبود یافت.}, keywords_fa = {هیدروکسی آپاتیت,آلیاژ تیتانیوم پوشش دهی پلاسما اسپری,پیش گرم کردن زیر لایه,عملیات حرارتی}, url = {https://amnc.aut.ac.ir/article_68755.html}, eprint = {https://amnc.aut.ac.ir/article_68755_06ab8ecf64bbfaf0032603e9ad4a83f3.pdf} } @article { author = {Moosakhani, Shima and Sabbagh Alvani, Ali Asghar and Mohammadpour, Raheleh and Hannula, Simo-Pekka}, title = {Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1415-1420}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.2}, abstract = {In this paper, chalcostibite (CuSbS2) nanocrystals were successfully synthesized via hot injection route. Sulfur precursor source and the effect of it on crystalline structure and morphology have been investigated. Sulfur powder (S) and thiourea (Tu) were used as a sulfur source and particles obtained were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis-NIR spectroscopy. Results revealed that CuSbS2 particles prepared by S had high purity and shape and size uniformity. Moreover, band gap determination studies indicated that direct and indirect values for the powders were 1.49 eV and 1.42 eV, respectively. Small difference between these values confirmed that this material has both direct and indirect band gaps.}, keywords = {CuSbS2,nanocrystals,Band gap}, title_fa = {ساخت و مشخصه یابی نانوکریستالهای مس آنتیمونی سولفید ( CuSbS2 )به روش تزریق داغ و بررسی اثر نوع پیش ساز سولفوری}, abstract_fa = {در این مقاله نانوکریستال های کالکوستیبایت (CuSbS2) به روش تزریق داغ سنتز شدند. در این تحقیق اثر نوع پیش ساز سولفوری بر ساختار کریستالی و ریزساختار ذرات تهایی مورد بررسی قرار گرفت. دو نوع پیش ساز پودر سولفور(S) و تیواوریا (TU) استفاده شدند و ذرات حاصل با استفاده از آزمون های پراش اشعه ایکس ، میکروسکوپ الکترونی روبشی ، اسپکتروسکوپی ماورا بنفش-مریی و محاسبه شکاف انرژی مورد بررسی قرار گرفتند. نتایج نشان داد که ذرات CuSbS2  با استفاده از پیش سازS دارای خلوص بالا و ریزساختار یکنواخت است. همچنین اندازه شکاف انرژی برای این پودر حدود 49 / 1 و 42 / 1 الکترون-ولت به ترتیب برای مقدار مستقیم و غیرمستقیم است. اختلاف کم بین دو مقدار مستقیم و غیرمستقیم تایید کرد که این ماده دارای هر دو نوع شکاف انرژی است.}, keywords_fa = {مس آنتیمونی سولفید,ساختار کریستالی,ریزساختار,شکاف انرژی}, url = {https://amnc.aut.ac.ir/article_68756.html}, eprint = {https://amnc.aut.ac.ir/article_68756_8f9ba4bc10712af67d1fbd4a706e50bc.pdf} } @article { author = {Ahamadi Azghandi, Mohammad Hosein and Keshavarz, Mosaddegh and Zarei Ahmadi, Amanollah and Parhami, Abolfath and Iravani, Nasir}, title = {Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1421-1428}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.3}, abstract = {The synthesis of multiwalled carbon nanotubes/poly ethylene glycol and β-cyclodextrin inclusion complex (MWCNT/PEG@ β-CD) as nanoplatform for the loading and delivery of Acyclovir (Acy) drugs is described here. The functionalized multi wall carbon nanotubes (e.g. MWCNT-COOH, MWCNT/PEG and MWCNT/PEG@CD) have been characterized by FTIR and HNMR spectroscopy, electron microscopy (SEM) and differential scanning calorimetry (DSC) to achieve insights on structure, morphology and chemical composition. In this work, the drug binding abilities of MWCNT/PEG@ β-CD nanocomplex towards the Acyclovir (Acy) were proved by UV–vis and DSC experiments. The release studies showed a sustained delivery of Acy without initial burst effect confirming a strong interaction of drug with the nanoplatform sites. Finally, it was approved that the nanocarrier obtained from MWCNT/PEG@CD is able to connect and sustained release of Acy in physiology condition. In agreement with these finding, MWCNT/PEG@CDs hybrid can be proposed as a biocompatible and biodegradation nanotube for loading a variety kind of drug.}, keywords = {Aggregate Complex,Nano Substrate,Nano-Constant}, title_fa = {سنتز و خصوصیت سنجی نانوکامپوزیت MWCNT/PEG/CD به عنوان حامل انتقال پیوسته داروی آسیکلوویر}, abstract_fa = {سنتز کمپلکس درهم جای نانولوله کربنی چند دیواره/ پلی اتیلن گلیکول و بتا سیکلودکسترین (MWCNT/PEG@β-CD ) به عنوان نانو بستر برای بارگذاری و انتقال داروی آسیکیلوویر توضیح داده شده است. نانو لوله های کربنی عاملدار( MWCNT/PEG, MWCNT-COOH,  MWCNT/PEG@CD) با استفاده از طیف سنجیFTIRو HNMR , میکروسکوپ الکترونی و DSC برای دستیابی به بینش مناسب ساختار، مورفولوژی و ترکیب شیمیایی مشخصه یابی شدند. در این کار، توانایی اتصال دارو به نانوحامل برایAcy به وسیله آزمایش های DSC و UV-vis اثبات شده است. مطالعات رهایش، یک انتقال پیوسته برای Acy بدون اثر ابتدایی شدید نشان داد که تایید کننده یک برهمکنش قوی دارو با سایتهای نانوذرات می باشد. درنهایت، اثبات شد که نانوحامل MWCNT/PEG@CDs قادر به اتصال و رهایش پیوسته ی داروی Acy در شرایط فیزیولوژیکی می باشد. در توافق با این یافته ها، هیبریدMWCNT/PEG@CDs به عنوان یک نانولوله ی زیست سازگار و زیست در دسترس برای بارگیری انواع داروها می تواند پیشنهاد گردد.  }, keywords_fa = {کمپلکس درهم,نانو بستر,نانوحامل}, url = {https://amnc.aut.ac.ir/article_68760.html}, eprint = {https://amnc.aut.ac.ir/article_68760_b26e26fbb3555519c9dd78e4cbc0d559.pdf} } @article { author = {Merati, AliAkbar and Latifi, Masoud and Zamani, Fatemeh and Ghanbari Alanegh, Hosein and Nadipoor, Fatemeh}, title = {Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1429-1437}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.4}, abstract = {In this study plasma technology was applied on poly-lactic glycolic acid scaffolds to improve their hydrophilicity. The structure of nanofibrous web is modified using a high speed collector is electrospinning process. The general electrospun scaffold was compared with two types of plasma modified and structure modified scaffolds in hydrophilicity view point. Two types of solvents were used for electrospinning solution. The first was pure chloroform and the second was chloroform-dimethyl formaldehyde. We found that the samples that were electrospun with higher collector speed show lower contact angle and consequently higher hydrophilicity. The high speed of collector causes an aligned and regular web formation that improves the hydrophilicity of the electrospun nanofibous scaffold. The results of ATR-FTIR spectra showed that the samples modified by plasma shows enhancement in C=O and C-O groups that can be the reason of hydrophilicity enhancement of scaffolds.}, keywords = {Hydrophilicity,Electrospinning,Nanofibrous scaffold,Poly-lactic glycolic acid,Plasma}, title_fa = {افزایش آبدوستی لایه ی نانولیفی الکتروریسی شده پلی لاکتیک گلایکولیک اسید}, abstract_fa = {در این تحقیق از فنآوری پلاسما برای بهبود آبدوستی داربستهای نانولیفی پلی لاکتیک گلایکولیک اسید استفاده شد. علاوه بر استفاده از روش اصلاح پلاسما از اصلاح ساختاری نمونه ها نیز جهت بهبود آبدوستی این داربس تها استفاده گردید. به این ترتیب داربست های ساده الکتروریسی شده، از نظر میزان آبدوستی، با دو گروه داربست اصلاح شده فوق تحت مقایسه قرار گرفتند. الیاف در داربست های ساده بطور تصادفی و با سرعت پا یین جمع کننده در فرایند الکتروریسی تولید شدند و جهت انجام اصلاح ساختاری نمونه ها از سرعت بالای جمع کننده استفاده شد. برای تولید محلول الکتروریسی از کلروفرم و مخلوط کلروفرم/ دی متیل فرم آمید استفاده شد. نتایج نشان داد که زاویه تماس آب نمونه های اصلاح شده، به دو روش ساختاری و پلاسما، کاهش مطلوبی داشته و این نمونه ها آبدوستی بهتری در مقایسه با نمونه های خام و اصلاح نشده از خود نشان دادند. در مقایسه طیف ATR-FTIR نمونه ها مشاهده شد که گرو ههای وC-O و C-O در نمونه های اصلاح شده با پلاسما نسبت به نمونه های خام افزایش یافته است. این امر میتواند دلیل بهبود آبدوستی داربست باشد. همچنین، افزایش کینواختی و آرایش یافتگی الیاف در نمونه های اصلاح ساختاری شده توسط افزایش سرعت جمع کننده باعث بهبود آبدوستی نانوالیاف شده است.}, keywords_fa = {آبدوستی نانو الیاف,الکتروریسی,پلاسما,پلی لاکتیک گلایکولیک اسید}, url = {https://amnc.aut.ac.ir/article_68762.html}, eprint = {https://amnc.aut.ac.ir/article_68762_dfe3c9d9f9de661023dc63f2a2cf62b1.pdf} } @article { author = {Heidari, Amin and Talebi, Saeed and Rezaei, Mostafa}, title = {Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1439-1447}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.5}, abstract = {Several methods such as oscillatory rheometry, by following modulus build up, and solid state nuclear magnetic resonance (NMR) have been introduced to investigate entanglement density of polymers. In this study, we developed a new method to evaluate entanglement density in ultra-high molecular weight polyethylene (UHMWPE) using dynamic mechanical thermal analysis (DMTA). DMTA tests were conducted on films and drawn tapes made from low entangled UHMWPE and UHMWPE nanocomposites containing graphene nano-sheets. In this study, the relation between α-transition temperature and entanglement density was investigated. DMTA results confirmed that as the content of entanglements increased, the chain mobility decreased and the α-transition moved to higher temperatures. It was found that the drawn tapes show a modulus increase with temperature in DMTA due to the tendency of the UHMWPE chains to return to its undrawn state.}, keywords = {UHMWPE,chain entanglements,UHMWPE/Graphene nanocomposite,α-transition,DMTA}, title_fa = {یک روش جدید برای ارزیابی تراکم گره خوردگی های زنجیری در پلی اتیلن با وزن مولکولی بسیار بالا( UHMWPE)و نانو کامپوزیت آن با گرافن}, abstract_fa = {بررسی دانسیته گره خوردگی زنجیره ها در پلیمرها از روشهای متعددی همچون بررسی افزایش مدول در آزمون رئومتری و رزونانس مغناطیسی هسته در حالت جامدانجام شده است. در این مطالعه، روش جدیدی برای ارزیابی گره خوردگی ها در پلی اتیلن با وزن مولکولی بالابا استفاده از آنالیز دینامیکی مکانیکی حرارتی پیشنهاد شده است. آزمون های DMTA بر روی فیلم ها و نوارهای کشیده ساخته شده از UHMWPE و نانوکامپوزیت های UHMWPE حاوی نانو صفحات گرافنانجام شده است. در این مطالعه رابطه بین دمای انتقال α و گره خوردگی زنجیره ها بررسی شده است. نتایج DMTA تایید می کند که با افزایش محتوای گره خوردگی ها، حرکت زنجیره ها محدود شدهو دمای انتقال α به دماهای بالاتر منتقل می شود. همچنین دیده شد که نوارهای کشیده شده پلیمر خالص و نانو کامپوزیت به دلیل تمایل زنجیره های UHMWPE برای بازگشت به حالت کلافی،افزایش مدول را با افزایش دما در DMTA نشان می دهد}, keywords_fa = {جوشکاری TIG,سختی,سایش,خوردگی,کاربید تنگستن}, url = {https://amnc.aut.ac.ir/article_68785.html}, eprint = {https://amnc.aut.ac.ir/article_68785_dab11bc92c4541ebfcaf3a6c7cd8feae.pdf} } @article { author = {فیض پور, مهدی and عبادزاده, تورج}, title = {Synthesis and Synthesis Mechanism of Piezoelectric Powder Sodium Potassium Anhydride (KNN) Calcified at High and Low Temperatures}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1449-1469}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.6}, abstract = {The Potassium Sodium Nayobate Ceramic, now known as the KNN, is a lead-free piezoelectric compound due to its good electromechanical properties. The solid state synthesis temperature of KNN powder is generally in the range of 750-950 ° C. In this research, it was examined whether the calcination temperature of KNN powder was still lower and that the zinc absorption and ceramic properties of this low temperature powder were as high as the temperature of the powder? Based on the STA thermal analysis from a mixture of KNN phase precursors, it was found that the temperature range of 550 ± 50 ° C for the synthesis of low-temperature KNN powder can be studied more accurately. Further studies using X-ray diffraction technique showed that double-calcined powders at 550 ° C had no secondary phases or residual materials, especially Nb2O5. The density of the two-hour specimen samples of KNN powder cloned at high temperature (850 ° C) and low temperature (550 ° C) equaled 94% of the density of theoretical measurement. It was found that the secondary phases that can be formed in this system are polysubiable phases formed by the evaporation of alkaline elements, and especially potassium at high temperatures, in both types of ceramic enamel from high-temperature and low-temperature powders . The piezoelectric charge coefficient, the saturation polarization and the retained ceramic of the coated powder at a low temperature were calculated to be 4.30 μC / cm2, 97 pC / N and 24.7 μC / cm2, which is comparable and even higher than The measured values ​​for the coated ceramic from high temperature pyrite are 99 pC / N, 4/29 μC / cm2 and 23.5 μC / cm2 respectively. The results of this study show that without fear of being affected by the final properties of the component, it is possible to reduce the solid state temperature of the KNN.}, keywords = {Potassium nitrate - Sodium,Pseulectric without lead,Synthesis and synthesis,Calcification}, title_fa = {بررسی ساز و کار سنتز و زینتر پودر پیزوالکتریک نایوبات پتاسیم سدیم (KNN )کلسینه شده در دماهای بالا و پایین}, abstract_fa = {سرامیک نایوبات پتاسیم سدیم که از این پس با نام اختصاری KNN شناخته میشود، یک ترکیب پیزوالکتریک بدون سرب است که به دلیل خواص الکترومکانیکی خوبی که دارد، مورد توجه قرار گرفته است. دمای سنتز حالت جامد پودر KNN عموماً در محدودۀ 750-950ºC قرار دارد. در این پژوهش، بررسی شد که آیا می توان دمای کلسیناسیون پودر KNN را همچنان پایینتر آورد یا خیر و اینکه زینترپذیری و خواص سرامیک زینترشده از این پودر دما-پایین تاچه میزان قابل مقایسه با پودر دما-بالا است؟ بر اساس نتیجۀ آنالیز حرارتی STA از مخلوط پیش ماده های فاز KNN ، مشخص شد که محدودۀ دمای 550±50˚C برای سنتز دما-پایین پودر KNN میتواند مورد بررسی دقیقتر قرار بگیرد. بررسیهای بیشتر با استفاده از تکنیک پراش اشعۀ X نشان داد که پودرهای دوبار کلسینه شده در دمای 550˚C فاقد فازهای ثانویه یا مواد اولیۀ باقی مانده به ویژه Nb2O5 هستند. دانسیتۀ نمونه های دو ساعت زینترشده از پودرهای KNN کلسینه شده در دمای بالا ( 850˚C ) و دمای پایین ( 550˚C ) برابر 0/ 94 % دانسیتۀ تئوری انداز هگیری شد. مشخص شد فازهای ثانویه ای که امکان تشکیل آنها در این سیستم وجود دارد، فازهای پلی نایوباتی هستند که به دلیل تبخیر عناصر قلیایی و به ویژه پتاسیم در دماهای بالا در هر دو نوع سرامیک زینترشده از پودرهای دما-بالا و دما-پایین تشکیل می شوند. ضریب بار پیزوالکتریسیته، پلاریزاسیون اشباع و باقی ماندۀ سرامیک زینترشده از پودر سنتزشده در دمای پایین به ترتیب برابر 30/4 μC/cm2 ،97 pC/N و 24/7 μC/cm2 انداز هگیری شد که قابل مقایسه و حتی در مواردی بالاتر از مقادیر اندازه گیری شده برای سرامیک زینترشده از پودر سنتزشده در دمای بالا )به ترتیب برابر 99 pC/N ، 29/4 μC/cm2 و 23/5 μC/cm2  )می باشد. نتایج این پژوهش نشان می دهد که بدون ترس از تحت تأثیر قرار گرفتن خواص نهایی قطعه، امکان کاهش دمای سنتز حالت جامد پودر سرامیک KNN تا دمای 550˚C وجود دارد}, keywords_fa = {نایوبات پتاسیم - سدیم,پیزوالکتریک بدون سرب,سنتز و زینتر حال تجامد,کلسیناسیون}, url = {https://amnc.aut.ac.ir/article_68786.html}, eprint = {https://amnc.aut.ac.ir/article_68786_f181b34f918b574e883be146bc5422e7.pdf} } @article { author = {Arekhi, Marieh and Jamshidi, Masoud}, title = {Investigation of water-based binders (organic-inorganic) application on mechanical properties of photocatalytic pseudo-paints}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {20}, pages = {1471-1480}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.20.7}, abstract = {Photocatalytic paints are polymer compounds containing the nanocatalyst that are used to break down dangerous air pollutants to low-risk compounds. In this research, photocatalytic pseudo-paint based on water-based acrylic binder with TiO2 pigment and TiO2 nanoparticles was made. In order to improvement of mechanical properties was used from water glass with different amounts in the formulation. Different amounts of TiO2 were used in this organic-inorganic binder composition and was determined the optimized formulation. Dispersion of TiO2 particles in aqueous suspensions and water glass was investigated. Tensile properties of prepared film from organic-inorganic pseudo-paint were compared with organic pseudo-paint and influence of water glass on tensile properties of pseudo-paint was investigated. The results of investigation showed that up to 10% water glass don't cause problem in film formation, whereas beyond this, in the film formation cause problem. The results showed that utilization of 5% water glass obtain the best tensile properties.}, keywords = {Photocatalytic paint,nanocatalyst,pseudo-paint,water glass,organic-inorganic binder}, title_fa = {بررسی اثر استفاده از بایندر معدنی روی خواص مکانیکی شبه رنگ های فوتوکاتالیستی}, abstract_fa = {رنگهای فوتوکاتالیستی، ترکیبات پلیمری حاوی نانو کاتالیست هستند که جهت تبدیل آلایندههای خطرناک هوا به ترکیبات کم خطر مورد استفاده قرار می گیرند. در این پژوهش شبه رنگ فوتوکاتالیستی بر پایه رزین آب پایه اکریلیک همراه با نانوتیتانیوم دی اکسید و رنگدانه تیتانیوم دی اکسید تهیه شد. به منظور ارتقاء خواص مکانیکی رنگ، از بایندر معدنی پایه سیلیس (آب شیشه) با مقادیر مختلف در فرمولاسیون شبه رنگ استفاده شد. مقادیر مختلف تیتانیوم دی اکسید در این ترکیب بایندری آلی-معدنی بکار رفت و فرمولاسیون بهینه شبه رنگ فوتوکاتالیستی برای حصول بهترین خواص کششی تعیین شد. پخش ذرات تیتانیوم دی اکسید در محیط آبی و آب شیشه بررسی شد. خواص کششی فیلم تهیه شده از شبه رنگ آلی-معدنی با رنگ آلی مقایسه شد و اثر آب شیشه بر خصوصیات کششی فیلم رنگ بررسی گردید. نتایج بررسی ها نشان داد که حداکثر مقدار10% آب شیشه می تواند به شبه رنگ اضافه شود تا تشکیل فیلم رنگ آب پایه، دچار مشکل نشود. بررسی خواص نشان می دهد که مصرف5% آب شیشه بهترین رفتار کششی نمونه های پلیمری را حاصل می کند.}, keywords_fa = {رنگ فوتوکاتالیستی,نانوکاتالیست,شب هرنگ,آب شیشه,بایندر آلی-معدنی}, url = {https://amnc.aut.ac.ir/article_68787.html}, eprint = {https://amnc.aut.ac.ir/article_68787_ab5337164d5cc9539fcc36a08d81bb9e.pdf} }