@article { author = {Meidanchi, Alireza and Mirabi, Shiva}, title = {Comparison of Magnetic, Optical and Morphological Properties of the Nanocomposite of Reduced Graphene Oxide Coated with Zinc Ferrite Synthesized by One-Step Hydrothermal and Two-Step Sol-Gel / Hydrothermal Methods}, journal = {Advanced Materials and New Coatings}, volume = {9}, number = {33}, pages = {2424-2433}, year = {2020}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2020.9.33.6}, abstract = {Reduced graphene oxide coated with zinc ferrite (ZnFe2O4@rGO) nanocomposite was successfully synthesized by the one-step hydrothermal (HT) and the two-step sol-gel/hydrothermal (SG/HT) methods. The results of SEM and TEM images showed that the graphene oxide sheets for HT and SG/HT syntheses had dimensions of 0.3-0.04 μm and 0.7-0.07 μm, respectively,. According to these images, the size of ZnFe2O4 nanoparticles coted on graphene oxide sheets for HT and SG/HT syntheses were observed at 10-40 nm and 25-70 nm, respectively. Comparison of the optical absorption spectrum of ZnFe2O4@rGO nanocomposites synthesized by HT and SG/HT methods revealed that the amount of band gap energy in SG/HT synthesis was about 7% less than from SG/HT synthesis. According to the results obtained from the Raman spectrum for the synthesized graphene oxide sample, the ID/IG ratio was 0.88,. The results of FTIR spectra demonstrated effective reduction of GO as well as composite formation between rGO plates and ZnFe2O4 nanoparticles for both SG/HT and HT synthesis methods. The results of the magnetic properties of ZnFe2O4@rGO nanocomposites synthesized by HT and SG/HT methods by VSM and magnet with 1 T intensity, states that both methods of synthesis produced superparamagnetic materials,. Based on the results of this study, it can be said that for photothermal therapeutic applications which particle size and uniformity of ZnFe2O4@rGO nanocomposites are important, single-step HT method, and for photocatalytic applications and contrast agent in MRI, which need more photocatalytic and magnetic properties, the two-step SG/HT method can be better choice.}, keywords = {graphene oxide,zinc ferrite nanoparticles,Superparamagnetic,Hydrothermal,Sol-Gel}, title_fa = {مقایسه خواص مغناطیسی، اپتیکی و ریخت شناسی نانو کامپوزیت گرافن اکساید احیاشده با پوشش فریت روی سنتز شده به روش تک مرحله ای هیدروترمال و دو مرحله ای سل-ژل/هیدروترمال}, abstract_fa = {نانوکامپوزیت گرافن اکساید احیاشده با پوشش فریت روی (ZnFe2O4@rGO) با موفقیت بوسیله روش تک مرحله ‌ای HT و روش دومرحله‌ای SG/HT برای اولین بار سنتز گردید. نتایج حاصل از تصاویر SEM و TEM نشان دادند صفحه های گرافن اکساید ناشی از سنتزهای HT و SG/HT به ترتیب ابعادی در بازه‌های µm 0.3-0.04 و µm 0.7-0.07 دارند و همچنین پوشش نانو ذرات ZnFe2O4 را روی این صفحه های گرافن اکسایدی نشان دادند. با توجه به این تصاویر اندازه نانو ذرات ZnFe2O4 روی صفحه های گرافن اکساید برای سنتزهای HT و SG/HT به ترتیب در بازه‌های nm 10-40 و nm 25-70 مشاهده گردید. . از مقایسه مقادیر بدست آمده برای شکاف انرژی نمونه‌ها مشخص می شود مقدار شکاف انرژی در سنتز SG/HT حدود 7 درصد کمتر از سنتز HT است. نسبت ID/IG با توجه به طیف رامان مقدار 0.88 بدست آمد که بیانگر سنتز باکیفیت گرافن اکساید است. نتایج حاصل از طیف FTIR، احیا موثر GO و همچنین شکل‌گیری کامپوزیت بین صفحه‌های rGO و نانوذرات ZnFe2O4 را برای هر دو روش سنتزSG/HT و HT اثبات کرد. نتایج بدست آمده از بررسی خاصیت مغناطیسی VSM و آهنربا با شدت T 1، خاصیت سوپرپارامغناطیسی هر دو نمونه را اثبات کرد. با توجه به نتایج بدست آمده از این تحقیق می توان گفت برای کاربردهای درمانی به روش فوتوترمال روش تک مرحله‌ای HT، و برای کاربردهای فوتوکاتالیستی و عامل کنتراست در MRI که خاصیت فوتوکاتالیستی و مغناطیسی بالاتر مدنظر باشد روش دو مرحله‌ای SG/HT می‌تواند انتخاب مناسبتری باشد.}, keywords_fa = {گرافن اکساید,نانوذرات فریت روی,سوپرپارامغناطیس,هیدروترمال,سل-ژل}, url = {https://amnc.aut.ac.ir/article_114711.html}, eprint = {https://amnc.aut.ac.ir/article_114711_eb72c2aea687848b86e310c48814b754.pdf} }