@article { author = {Bahramian, Alireza and Hamidi pasand, Vahid and Mazaheri, Reza}, title = {Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines}, journal = {Advanced Materials and New Coatings}, volume = {10}, number = {38}, pages = {2780-2791}, year = {2021}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {amnc.2021.10.38.2}, abstract = {Abstract: Polyurethane mastic coating (PU) according to IGS-M-TP-020-2 standard of Iran Gas Company is used as one of the insulation methods for pipes and fittings along with other insulation methods. In this study, hybrid nanocomposite coatings were prepared by mixing PU with 0.3 wt% by weight of multi-walled carbon nanotubes modified with different weight percentages of nanosilica in the thickness range of 1500-1000 μm. Characteristic tests were performed for coating application in gas transmission pipelines and the results were compared with pure PU sample. According to the analysis of transmission electron microscopy, the optimal amount of 1% by weight of nanosilica led to the proper dispersion of nanoparticles within the polymer structure. The high resistance of nanocomposite coating against moisture penetration and its hydrophobicity was justified by reducing the glide angle to 17o and increasing the sphericity of water droplets on the coating surface. Less than 100 mg of mass loss due to mechanical abrasion and a slight decrease in the adhesion of the coating on the steel surface (less than 15%) and the elongation (%) under standard tension in the range of 10-15% compared to pure PU coating, justifies its use as a new coating to increase the life of steel gas pipes. The results of this research regarding the mentioned tests indicate the observance of the technical standards of Iran Gas Company by the proposed coverage. Investigation of other technical requirements of the coating is essential in research futures.}, keywords = {Nanocomposite Coating,Reinforced Polyurethane,Nanosilica Modified Carbon Nanotube,Hydrophobicity,Gas Transmission Pipeline}, title_fa = {بهبود خواص آبگریزی و سایش مکانیکی پوشش پلی یورتان تقویت شده با هیبرید نانولوله کربنی اصلاح شده با نانوسیلیکا جهت کاربری در خط لوله انتقال گاز}, abstract_fa = {پوشش ماستیکی پلی یورتان (PU) طبق استاندارد IGS-M-TP-020-2 شرکت گاز ایران بعنوان یکی از روش‌های عایقکاری لوله‌ها و اتصالات در کنار سایر روش‌های عایقکاری بکار می‌رود. در این پژوهش پوشش‌های نانوکامپوزیت هیبریدی حاصل از اختلاطPU با 3/0 درصد وزنی نانولوله کربنی چند دیواره اصلاح شده با درصدهای وزنی مختلف نانوسیلیکا در بازه ضخامتی μm1500-1000 تهیه شدند. مطابق آنالیز میکروسکوپ الکترونی عبوری مقدار بهینه یک درصد وزنی نانوسیلیکا منجر به پراکندگی مناسب نانوذرات درون ساختار پلیمر شد. بالا بودن مقاومت پوشش نانوکامپوزیتی در برابر نفوذ رطوبت و ایجاد خاصیت آبگریزی آن با کاهش زاویه‌ی سرش به 17 درجه و افزایش میزان کرویت قطرات آب روی سطح پوشش توجیه شد. مقادیر کمتر از 100 میلی گرم جرم اتلافی ناشی از سایش مکانیکی و افت ناچیز میزان چسبندگی پوشش روی سطح فولادی (کمتر از 15 درصد) و میزان ازدیاد طول تحت کشش استاندارد در بازه 15-10 درصد نسبت به پوشش PU خالص، استفاده از آن را بعنوان یک پوشش نوین جهت افزایش عمر لوله‌های فولادی گاز قابل توجیه می‌سازد. نتایج این تحقیق در خصوص آزمون‌های یاد شده، حاکی از رعایت استانداردهای فنی شرکت گاز ایران توسط پوشش پیشنهادی است. بررسی سایر الزامات فنی پوشش نظیر میزان جدایش کاتدی و مقادیر چگالی شدت جریان مورد نیاز با توجه به عمر خط لوله، مقاومت در برابر ضربه حین قرارگیری در شرایط دمایی و محیطی مختلف و مطابقت با ایستگاه‌های حفاظت کاتدی مورد استفاده در صنعت گاز در پژوهش‌های آتی امری ضروری است.}, keywords_fa = {: پوشش نانوکامپوزیت,پلی یورتان تقویت شده,نانولوله کربنی اصلاح شده با نانوسیلیکا,خاصیت آبگریزی,خط لوله انتقال گاز}, url = {https://amnc.aut.ac.ir/article_146136.html}, eprint = {https://amnc.aut.ac.ir/article_146136_2b8e2dfca41cf497ecfa337b573507af.pdf} }