@article { author = {ملکی, محمدجواد and مجیدیان, هودسا and ذاکری, محمد and بنی جمالی, سارا}, title = {Evaluation of rheological parameters of cordierite suspensions}, journal = {Advanced Materials and New Coatings}, volume = {6}, number = {22}, pages = {1577-1586}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2017.6.22.3}, abstract = {In this paper slip casting forming method for cordierite glass ceramic was investigated. Oxide raw materials and three dispersants were used for desirable suspension preparation. Raw materials processing (mixing and clcination, mixing and fritizing), milling time (both for wet and dry milling) and the dispersants percentages are the examined parameters in order to choose the stability conditions. Evaluation of the prepared suspensions were done using rheology, particle size distribution, zeta potential, slip casting rate and sedimentation tests. Results show that Dolapix PCN can be introduced as the most suitable dispersants for suspension preparation. The behavior of the suspensions were shear thinning at low shear rates and shear thickening at high shear rates. The stability of the suspension which was prepared by frit and the green density of its forming article were higher rather than the other suspensions.}, keywords = {Slip casting,Rheology,Dispersant,Cordierite}, title_fa = {ارزیابی پارامترهای رئولوژی دوغابهای کوردیریتی}, abstract_fa = {در این پژوهش روش ریخته­گری دوغابی بر پایه شیشه سرامیک کوردیریتی بررسی شد. از مواد اولیه اکسیدی و سه نوع روانساز جهت تهیه دوغاب مناسب استفاده شد. نوع فراوری مواد اولیه (مخلوط و کلسینه کردن، مخلوط کردن و ساخت فریت)، زمان آسیاب پودرها (در دو حالت تر و خشک) و درصد روانسازهای مختلف از جمله پارامترهایی بودند که جهت انتخاب شرایط پایدارسازی بررسی شدند. ارزیابی دوغاب­های تهیه شده با استفاده از آزمون­های رئولوژی، توزیع اندازه ذرات، پتانسیل زتا، اندازه­گیری رسوب و سرعت ریخته­گری انجام شد. نتایج به­دست آمده نشان داد که دولاپیکس PCN به عنوان بهترین روانساز جهت تهیه دوغاب مورد نظر معرفی می­شود. رفتار دوغاب­ها در سرعت­های برشی پایین رقیق شدن برشی و در سرعت­های برشی بالا، غلیظ شدن برشی بود. پایداری دوغاب تهیه شده از فریت و چگالی خام بدنه حاصل از آن نسبت به دوغاب­های دیگر بیشتر بود.}, keywords_fa = {ریخته گری دوغابی,رئولوژی,روانساز,کوردیریت}, url = {https://amnc.aut.ac.ir/article_68620.html}, eprint = {https://amnc.aut.ac.ir/article_68620_b1b393f93cbeb786c4cf2b56b03cad0d.pdf} }