@article { author = {Palimi, Mohammad Javad and Rostami, Mehran and Mahdavian, Mohammad and Ramezanzadeh, Bahram}, title = {Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating}, journal = {Advanced Materials and New Coatings}, volume = {3}, number = {11}, pages = {733-741}, year = {2014}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/2015.3.11.2}, abstract = {In this study, Fe203 nanoparticles were modified using 3-amino propyl trimethoxy silane (APTMS) in order to achieve a proper dispersion of the nanoparticles in a polyurethane-based coating. Fourier transform infrared (FTIR) spectroscopy and turbidimetery were utilized in order to investigate the grafting reactions of APTMS molecules on the surface of the nanoparticles. Polyurethane nanocomposites were prepared by adding of various amounts of treated and untreated Fe2O3 nanoparticles into the matrix. The nanoparticles dispersion in the coating matrix was studied by field emission scanning electron microscopy (FE-SEM). Tensile test was utilized in order to investigate the mechanical properties and fracture behavior of the nanocomposites, respectively. Results obtained from FTIR and turbidimetery showed that the organic functional groups of the silane were successfully grafted on the surface of  the nanoparticles. It was observed that the mechanical properties of the polyurethane coating were enhanced in the presence of surface modified Fe2O3 nanoparticles.}, keywords = {Fe2O3 nanoparticles,Silane,Surface modification,Mechanical properties}, title_fa = {تاثیر اصلاح شیمیایی سطح نانوذرات اکسید آهن بر مورفولوژی و خواص مکانیکی پوشش های پلی یورتان}, abstract_fa = {در این مطالعه نانوذرات اکسید آهن توسط 3-آمینوپروپیل تری متوکسی سیلان (APTMS) با هدف ایجاد پراکنش مناسب در ماتریس پلی پورتانی اصلاح شده. طیف سنجی مادون قرمز (FTIR) و کدورت سنج برای بررسی میزان اتصال سیلان روی سطح نانوذرات استفاده شد. از مقادیر مختلفی از نانوذرات اکسید آهن اصلاح شده و اصلاح نشده برای تهیه نانوکامپوزیت های پلی یورتانی استفاده میشود. پراکنش نانوذرات در ماتریس پلیمری توسط میکروسکوپ الکترونی روبشی گسیل میدانی (FE-SEM) مورد مطالعه قرار گرفت. از آزمون کشش و میکروسکوپ الکترونی روبشی به ترتیب برای خواص مکانیکی و رفتار شکست نانوکامپوزیت ها استفاده شد. نتایج به دست آمده از آزمون FTIR و کدورت سنج نشان داد که گروه های آلکوکسی سیلان به طور موفقیت آمیزی بر روی سطح نانوذرات متصل شدند. نتایج آزمون های کشش نشان داد که افزودن نانوذرات اکسید آهن اصلاح شده بع پوشش پلی یورتان بهبود استحکام کششی و انرژی در نقطه شکست را  باعث میگردد.}, keywords_fa = {نانوذرات اکسید آهن,سیلان,اصلاح سطحی,خواص مکانیکی}, url = {https://amnc.aut.ac.ir/article_69049.html}, eprint = {} }