@article { author = {Nasouri, Komeil and Doostdar, Kamal and Shoushtari, Ahmad}, title = {Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process}, journal = {Advanced Materials and New Coatings}, volume = {3}, number = {12}, pages = {799-808}, year = {2014}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/2015.3.12.1}, abstract = {Multiple nozzle electrospinning systems can be designed to increase both productivity and thickness for large scale nanofibers production. In the present study describes the results of the experimental investiganon andults of the penerimental investigation and modeling of multiple jets during the electrospinning of polyacrylonitrile (PAN) solutions. Several multiple nozzle electrospinning setups were tested. PAN solutions (15 w/v%) were electrospun varying the number of nozzles between 1 and 4. Nanofiber morphology was observed under a scanning electron microscopy (SEM). With increasing the mumber of nozzles in the electrospinning setup from 1 to 4, the average nanofibers diameter increased from 223+26 nm to 519278 nm. The geometrical alignment and number of the nozzles showed significant effects on the average dianeter and the divergence angle between jets. The divergence angle enlargement due to the increase of jeis number from 2 to 4, made necessary to increase collector dimensions from 20cmX25cm to 40cm x 45cm. It indicates that the interaction between the polymer jets from individual nozzles plays a great role in the electrospun nanofibers formation.}, keywords = {Multiple jets,Electrospinning,Modeling,Nanofibers,morphology,Nozzle alignment}, title_fa = {بررسی شکل گیری نانوالیاف در فرآیند الکتروریسی چندنازله}, abstract_fa = {سامانه های الکترو ریسی چندنازله را می توان برای افزایش بهره وری و ضخامت ها در سطح وسیع برای تولید نانوالیاف طراحی نمود. در پژوهش حاضر، نتایج حاصلاز تحقیقات تجربی و مدل سازی جت های چندگانه در طی فرآیند الکتروریسی از محلول های پلی اکریلونیتریل (NAP) مورد بررسی قرار گرفت و چیدمان هایمختلف از فرآیند الکتروریسی چندگانه ارزیابی شدند. محلولهای NAP با غلظت v / w%۱۵ با تعداد نازل های مختلف بین ۱ و ۴ الکتروریسی شدند. ساختار الیاف تولیدی بوسیله میکروسکوپ الکترونی روبشی (MES) مورد بررسی قرار گرفتند. با افزایش تعداد نازل در فرآیند الکتروریسی از ۱ به ۴ مقدار قطر نانوالیاف تولیدی از مقدار ۳۲۲۶۲ به ۹۱۵+_۸۷ نانومتر افزایش یافتند. چیدمان هندسی نازل ها و نیز تعداد آن ها تاثیرات قابل توجهی در مقدار میانگین قطر نانوالیاف و زاویه انحراف بین جت ها نشان دادند. بزرگ شدن زاویه انحراف با توجه به افزایش تعداد جت ها از ۲ تا ۴، نیاز به افزایش ابعاد جمع کننده از مقدار ۲۰cmx۵۲ cm به ۴۰cmx۵۴cmمی باشد. این نتایج نشان می دهد که برهم کنش بین جت های پلیمری از هرکدام از نازل ها نقش اساسی در تشکیل نانوالیاف الکتروریسی شده دارند.}, keywords_fa = {جت های چندگانه,الکتروریسی,مدل سازی,نانوالیاف,مورفولوژی,چیدمان نازل}, url = {https://amnc.aut.ac.ir/article_69084.html}, eprint = {} }