@article { author = {Ghasemi Hejran Doost, Reza and Kalaee, Mohammadreza and Zaarei, Davood}, title = {Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method}, journal = {Advanced Materials and New Coatings}, volume = {7}, number = {27}, pages = {1925-1936}, year = {2019}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2019.7.27.5}, abstract = {Plastisols are the liquid suspension compositions containing polyvinyl chloride resin (PVC), plasticizers and extenders, with various applications such as automobile coatings as seam sealers, which converts to the flexible material using heat. Rheological and mechanical properties of these compositions are related to the type of reinforcing materials. Reinforcing materials like nano silica has been used for improvement of different properties of these compositions. In this research, using Taguchi method and optimized model calculated from experimental design, effect of PVC type, particle size of calcium carbonate, type of plasticizer and silica particle size on mechanical and rheological properties like viscosity, strength, hardness and morphology were investigated. Particle size was evaluated using scanning electron microscopy and the results were analyzed. Based on variance analysis, it was found that for reaching to the optimum process conditions and highest strength of plastisol coatings, K-value for PVC resin must be about 70, mesh size of calcium carbonate about 1000, type of plasticizer was dibutyl phthalate (DBP) and nano silica particle size was about 200 nm.}, keywords = {tensile strength,Taguchi method,Calcium Carbonate,Rheology,Plastisol Coating}, title_fa = {ارزیابی اثر پارامترهای موثر بر خواص رئولوژیکی و مکانیکی پوششهای خودرویی پلاستیزول تقویت شده با نانو ذرات سیلیکا با استفاده از روش تاگوچی}, abstract_fa = {پلاستیزولها، ترکیباتی شامل رزین پلی وینیل کلراید، نرم کننده ها و تقویت کننده به صورت سوسپانسیون مایع می باشند که در اثر حرارت تبدیل به مواد منعطف با کاربردهای متنوع، نظیر پوششهای خودرویی تحت عنوان سیلر می گردند. خواص رئولوژیکی و مکانیکی این ترکیبات بستگی به نوع تقویت کننده دارد. تقویت کننده هایی نظیر نانو سیلیکا جهت بهبود خواص مختلف این ترکیبات به کار گرفته شده اند. در این تحقیق، با استفاده از روش تاگوچی و مدل بهینه به دست آمده از طراحی آزمایش، اثر نوع پی وی سی (PVC)، مش کربنات کلسیم، نوع نرم کننده و اندازه ذرات سیلیکا بر خواص مکانیکی و رئولوژیکی این ترکیبات نظیر گرانروی، استحکام، سختی و مورفولوژی بررسی شد. در بخش ارزیابی اندازه ذرات از میکروسکوپ روبشی استفاده شد و نتایج مورد بحث و تحلیل قرار گرفت. بر اساس تحلیل های واریانس و نتایج کسب شده مشخص شد که برای حصول شرایط بهینه و بیشترین مقدار استحکام برای پوششهای پلاستیزول نهایی می بایستی از رزین PVC با مقدار K برابر با 70، کربنات کلسیم با مش 1000، نرم کننده نوع DBP و نانو ذرات سیلیکا با اندازه 200 حدود نانومتر استفاده شود.}, keywords_fa = {استحکام کششی,تاگوچی,کربنات کلسیم,رئولوژی,پی وی سی.پوشش پلاستیزول}, url = {https://amnc.aut.ac.ir/article_86936.html}, eprint = {https://amnc.aut.ac.ir/article_86936_da53dad8affbd91f2d59fd47ad88b159.pdf} }