per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-03-21
6
23
1627
1634
/amnc.2018.6.23.1
69271
Research Article
بررسی خواص فیزیکی، مکانیکی و صوتی شبکههای درهم نفوذ کرده پلی یورتان و پلی متیل متاکریلات
Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks
محمدرضا منظم
1
غلامرضا مرادی
2
پروین نصیری
3
امیر ارشاد لنگرودی
a.ershad@ippi.ac.ir
4
مرکز تحقیقات آلودگی هوا، پژوهشکده محیط زیست،دانشکده بهداشت ، دانشگاه علوم پزشکی تهران، ایران
دانشکده بهداشت، دانشگاه علوم پزشکی و خدمات بهداشتی درمانی تهران، تهران، ایران
دانشکده بهداشت، دانشگاه علوم پزشکی و خدمات بهداشتی درمانی تهران، تهران، ایران
گروه رنگ و روکشهای سطح، پژوهشکده فرآیند، پژوهشگاه پلیمر و پتروشیمی ایران
امروزه کنترل آلودگی صوتی اهمیت زیادی دارد. آلودگی صوتی سبب آسیب رساندن به انسان و آرامش او می شود. یکی از روشهای کنترل صدا استفاده از مواد جاذب صدا (بخصوص فوم های پلیمری ) میباشد. در سالهای اخیر استفاده از کامپوزیتهای پلیمری به ویژه شبکههای پلیمری در هم نفوذ کرده (IPN) در ساخت مواد جاذب صدا مورد توجه قرار گرفته اند. کامپوزیتهای IPN بطور گسترده ای به عنوان عامل میرائی صدا و ارتعاش به علت خواص ویسکوالاستیک بالا در محدوده دمای انتقال شیشهای مورد استفاده قرار می گیرند. در این مطالعه، از طریق پلیمریزاسیون درجا با استفاده از نسبت های متفاوتی از پلی یورتان (PU) و پلی متیل متاکریلات (PMMA) فوم شبکههای پلیمری درهم نفوذ کرده PU/PMMA تهیه شدند. اجزای سازنده IPN شامل پلی یورتان و پلی متیل متاکریلات بطور جداگانه جهت مقایسه خواص حرارتی، میرایی، مکانیکی و ضریب جذب صوت پلیمر سنتز شدند. ساختار شیمیایی ترکیبات توسط طیف سنجی FT-IR مورد بررسی قرار گرفت و خواص مکانیکی با استفاده از آزمایش کشش مطالعه شد. خواص میرائی و حرارتی نمونه ها به ترتیب با آزمون های دینامیکی مکانیکی انجام شد. اندازه گیری ضریب جذب صوت با استفاده از امپدانس تیوب دو میکروفنی در فرکانس 63 تا 6300 مطابق با استاندارد ISO 10534-2 انجام شد. متغیرهایی از قبیل مدول اتلاف و دمای انتقال شیشهای (Tg) همچنین افزایش فواصل دمایی با میرایی موثر(Tanδ>0.3) به عنوان شاخص جهت توانایی میرایی موثر استفاده شدند. تشکیل موفولوژی نیمه سازگار از طریق گستردگی منحنی tan δ و مشاهده دو پیک مجزا در منحنی DMA در IPNها مشخص شد. نتایج آشکار کرد که با تشکیل ترکیب فوم IPN، دمای انتقال شیشه ای به سمت دماهای بالاتر جابجا شده و گستره دمایی میرایی (گستره دمایی با>0.3 tan δ) افزایش پیدا می کند، در نتیجه خواص میرایی PU/PMMA IPN بهبود می یابد. همچنین نتایج ضریب جذب صوت نشان داد که به علت تشکیل فوم IPN، عملکرد ماده در یک فرکانس خاص به شکل راکتیو یا تشدید درآمده و با افزایش نسبت PMMA در IPN، فرکانس رزونانس به سمت فرکانس های پایین منتقل می شود. بنابراین با تغییر ترکیب مواد در سنتز شبکههای پلیمری درهم نفوذ کرده ، امکان انتخاب هدفمند از مواد میرا کننده صوت برای حل مشکلات خاص تکنولوژیکی وجود دارد.
Nowadays, Noise pollution control has great importance. Noise pollution causes harm to human’s body as well as distressing calmness. One way to control noise is the use of sound absorbing materials (especially polymer foams). In recent years, composite polymers especially interpenetrating polymer networks have received much attention because of the improved properties of polymers. Polymer composites with interpenetrated polymer network structure (IPN) are widely used as sound and vibration damping agents due to their high viscoelastic properties, within the glass transition temperature range. In this study, IPNs foams of polyurethane (PU) and poly(methyl methacrylate) (PMMA) were prepared by in situ polymerization using different ratios of PU/ PMMA (85:15, 75:25 and 65:35). IPN components including polyurethane and polyethyl methacrylate were synthesized separately to compare thermal properties, attenuation, mechanical and sound absorption coefficient of polymer. The chemical structure of the compounds was investigated by FT-IR spectroscopy and mechanical properties were studied using Tensile testing machine. Damping and thermal properties of the samples were performed using dynamic mechanical analysis (DMA) and thermo gravimetric (TGA) respectively. Measuring the absorption coefficient was performed using the Impedance Tube (SW60, BSWA) in the frequency range from 63 to 6300 Hz, according to ISO10534-2. As indicators of effective damping capability, viscoelastic parameters including loss factor (tan δ), glass transition temperature (Tg) and effective damping interval (tan δ > 0.3) were also determined. The formation of a semi-compatible morphology was indicated by the broad tan δ curve and two distinct transition peaks observed in the DMA curves of IPNs. The results revealed that formation of IPNs foams compound due to transform of glass transition temperature to higher temperatures and temperature of damping was increased. Therefore, in the result of the PU / PMMA IPNs damping properties were improved. Results show that because of the formation of IPN, the sound absorbing capacity of prepared samples increased at a certain frequency, and the resonance frequency shifted to lower frequencies by increasing the PMMA content in IPN foams. Therefore,it is possible to realize a purposeful selection of sound-damping materials for solving specific technological problems by varying the composition of the material.
https://amnc.aut.ac.ir/article_69271_bacec6e4bcd41fa37c9c4925bbe7dcf0.pdf
پلی یورتان
پلی متیل متاکریلات
شبکههای پلیمری نفوذ کرده(IPN)
ضریب جذب صوت
IPN
Polyurethane
Sound Absorption Coefficient
Mechanical properties
per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-03-21
6
23
1635
1640
/amnc.2018.6.23.2
68852
Research Article
ساخت نانوساختارهای پلاسمونیک نقره و مطالعه دینامیک مولکولی اثر غلظت پلیوینیلپیرولیدن بر خواص فوتوفیزیکی و ریزساختار آنها
Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth
رضا سلیمی
r-salimi@aut.ac.ir
1
علی اصغر صباغ الوانی
sabbagh_alvani@aut.ac.ir
2
نعیمه ناصری
naseri@sharif.edu
3
دانشجوی دکتری، پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیرکبیر
دانشیار، پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیرکبیر
استادیار، دانشکده فیزیک، دانشگاه صنعتی شریف
در پژوهش حاضر از روش فاز حلالی اتیلن گلایکول به کمک پلی وینیل پیرولیدن (PVP) جهت ساخت نانوساختارهای نقره در حضور هستهساز FeCl3 بهره گرفته میشود. همچنین علاوه بر آنالیزهای آزمایشگاهی جهت بررسی اثر غلظت PVP بر روی رشد نانوساختارها، از روش شبیهسازی دینامیک مولکولی نیز جهت مطالعه سازوکار رشد کریستالی نانوساختارهای نقره استفاده می شود. نتایج آنالیزهای پراش اشعه ایکس (XRD) و میکروسکوپ الکترونی روبشی (SEM) در کنار نتایج شبیهسازی دینامیک مولکولی نشان داد که PVP در غلظت بهینه به عنوان عامل محافظتکننده و پایدارکننده به علت انرژیهای برهمکنش متفاوت Ag-O با صفحات کریستالی مختلف نقره، منجر به رشد ناهمگون نقره و تشکیل نانوسیم میگردد. همچنین خواص پلاسمونیک نانوساختارهای سنتز شده با بهرهگیری آزمون طیفسنجی مرئی- فرابنفش (UV-Vis) مورد مطالعه قرار گرفت.
This study demonstrates a solution-phase polyvinylpyrrolidone (PVP)-assisted approach to prepare shape-controlled plasmonic Ag nanostructures in ethylene glycol (EG) solution via heterogeneous nucleation (in the presence of FeCl3). Combining with experimental study, molecular dynamics (MD) simulation is also used to understand the underlying principles governing nanowire growth through the analysis of the interaction energies between crystal surfaces and capping agent as well as atom density profile. The simulation results indicate that the PVP concentration, as a capping ligand and shape-directing agent, plays a key role in the anisotropic confinements during growth process of nanowires because the interaction energy between PVP molecules and silver crystals (through Ag : O coordination) on (100) and (110) planes is stronger, which leads to oriented attachment of crystals and the anisotropic growth on the (111) planes. Furthermore, the plasmonic properties of the as-synthesized nanowires are confirmed by UV-Visible spectra displaying a dual-peak absorption ascribed to the transverse dipole resonance (longer wavelength, λ=420 nm) and the transverse quadrupole resonance (shorter wavelength, λ=380 nm).
https://amnc.aut.ac.ir/article_68852_e2a5159698d0eb379d4f00864c5e8746.pdf
نانوساختارهای نقره
مکانیسم رشد
دینامیک مولکولی
غلظت PVP
اثر پلاسمونیک
Ag nanostructures
Molecular Dynamics
Crystal Growth
PVP Concentration
Plasmonic Effect
per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-02-20
6
23
1641
1654
/amnc.2018.6.23.3
79151
Research Article
ارزیابی اثر ضدخوردگی نانوپیگمنت های پایه رُسی اصلاح شده با ترکیبات آلی آزولی
Evaluation of the anti-corrosion effect of clay based nanopigments modified with organic azole compounds
میلاد ادراکی
esdraki5228@yahoo.com
1
داود زارعی
d_zarei@azad.ac.ir
2
دانشجوی دکتری ، مهندسی پلیمر ، دانشگاه آزاد اسلامی واحد تهران جنوب
دانشگاه آزاد اسلامی واحد تهران جنوب
چکیده در این تحقیق نانوذرات رُس مونت موریلونیت سدیمNa+- MMT)) توسط بازدارنده های خوردگی آزولی نظیر 2ـ مرکاپتو بنزوتی آزول (MBT) و 2ـ مرکاپتوبنزایمیدازول (MBI) از طریق واکنش تبادل یونی اصلاح سطحی گردید و به عنوان نانوپیگمنت های ضدخوردگی داخل رزین اپوکسی به کار گرفته شد. از آزمون های انکسار اشعه ایکس زاویه کوچک (SAXS) و میکروسکوپ الکترونی عبوری (TEM) برای ارزیابی پراکنش نانوپیگمنت های هیبریدی در داخل ماتریس پوشش استفاده شد و مورفولوژی ساختاری ترکیبات توسط آزمــون میکروسکوپ الکترونی روبشی (SEM) بررسی شد. از آزمــون های طیف سنجی امپدانس الکتروشیمیایی (EIS) و مه نمکی نیز برای بررسی رفتار خوردگی نانو پوشش ها در محیط خورنده محلول %5/3 کلرید سدیم استفاده گردید و همچنین آزمون سنجش زاویه تماس برای ارزیابی میزان آبدوستی و آبگریزی سطوح فولادی پوشش شده با و بدون ترکیبات رُسی بهینه شده با ترکیبات آزولی استفاده شد. نتایج حاکی از آن بوده که پوشش اپوکسی حاوی 3 درصد وزنی از نانوپیگمنت MMT+MBT در مقایسه پوشش اپوکسی حاوی 3 درصد وزنی از نانوپیگمنت MMT+MBI و پوشش اپوکسی خالص پس از 60 روز غوطه وری در محیط خورندة مذکور دارای عملکرد ضدخوردگی بالاتری بود و حضور این نانوپیگمنت، موجب افزایش آبگریزی سطح مربوطه گردید.
Abstract In this study, sodium montmorillonite clay (Na+-MMT) nanoparticles were surface modified by azole corrosion inhibitors such as 2-mercaptobenzothiazole (MBT) and 2-mercaptobenzimidazole (MBI) through ionic exchange reaction and used as anti-corrosion nanopigments inside epoxy resin. Small angle x-ray scattering (SAXS) and transmission electron microscope (TEM) tests were used to evaluate the distribution of hybrid nanopigments within the matrix of coating and the structural morphology of the compounds was investigated by scanning electron microscopy (SEM) test. Electrochemical impedance spectroscopy (EIS) and salt spray were also implemented to study the corrosion behavior of nano coatings in the corrosive environment of 3.5% sodium chloride solution. Additionally, contact angle measurement was used to evaluate the levels of hydrophilicity and hydrophobicity of steel surfaces coated with and without clay compounds optimized with azole compounds. The results indicated that epoxy coating containing 3 wt. % of MMT+MBT nanopigment, compared to epoxy coating containing 3 wt. % MMT+MBI and pure epoxy coating had higher anti-corrosion performance after 60 days of immersion in the above-mentioned corrosive environment and presence of this nanopigment led to an increase of the level of hydrophobicity in the related surface.
https://amnc.aut.ac.ir/article_79151_d29af1150481d7b41765775f3cf4d2e9.pdf
لایــه های سیلیکات
آزول
نـانــوپیگمنت ضـدخوردگی
پوشش نانوکامپوزیت
Layered Silicate
Azole
anti-corrosion nanopigment
Nanocomposite Coating
per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-03-19
6
23
1655
1668
/amnc.2018.6.23.4
79152
Research Article
پوششهای آبگریز بر پایه رزین آکریلیک آب پایه و بررسی اثر اضافه کردن نانوسیلیکا
Hydrophobic coatings based on acrylic copolymers and the effect of adding nano silica
امیر ارشاد لنگرودی
a.ershad@ippi.ac.ir
1
نسیم آزادی
nasim_azadi69@yahoo.com
2
دانشیار، گروه رنگ و روکشهای سطح، پژوهشکده فرآیند، پژوهشگاه پلیمر و پتروشیمی ایران،تهران صندوق پستی 115/14965
کارشناس ارشد، دانشکده مهندسی شیمی واحد تهران شمال، دانشگاه آزاد اسلامی
در این تحقیق از رزین آکریلیکی آب پایه به عنوان پوشش پایه استفاده گردید و اثر اضافه کردن نانو ذرات سیلیکا بر خواص آبگریزی پوشش بر روی سطوح معدنی بررسی شد. همچنین وجود نانو ذرات دیاکسیدتیتانیوم در نمونه ها سبب ایجاد خاصیت خود تمیزشوندگی پوشش شد. بستر مورد مطالعه در این پژوهش سنگهای از جنس کربنات کلسیم است که از محوطه تاریخی تخت جمشید تهیه شده است. ریختشناسی و سطح مقطع پوششها توسط میکروسکوپ الکترونی روبشی (SEM) بررسی شدند. مشخصهیابی این مواد با کمک آنالیزهای مختلف از جمله طیفسنج تبدیل مادونقرمز (FTIR)، آنالیز اشعه ایکس(XRD) ، میکروسکوپ الکترونی نیروی اتمی (AFM) و اندازه گیری زاویه تماس انجام گرفت. نتایج نشاندادند که با افزودن نانوسیلیکا به رزین آکریلیکی آب پایه خواص آبگریزی بهبود می یابد. همچنین نانوسیلیکا باعث افزایش زبری سطح شده و مقاومت در برابر شرایط پیرسازی مصنوعی را بهبود میبخشد. علاوه بر این، اثر فتوکاتالیستی نمونهها در زمانهای مختلف مورد بررسی قرارگرفت.
In this study, water based acrylic copolymers were used as base coatings and the effect of adding silica nanoparticles was investigated in the hydrophobic properties of coating. In addition, the presence of titanium dioxide nano particles creates the self-cleansing properties in the coating. In this study, calcium carbonate stones are used as the mineral substrate from the historical site of Persepolis in Fars province. The morphology and cross-sectional of coatings were studied by scanning electron microscopy (SEM). Characterization of these materials was carried out with the various analyzes, including the FTIR, X-Ray Analysis (XRD), Atomic Force Electron Microscopy (AFM), and Contact Angle measurements. The results indicated that the addition of nano silica to acrylic copolymers improves hydrophobic properties. Furthermore, nano silica improves surface roughness and improves resistance to artificial aging conditions (accelerated weathering test). In addition, the photocatalytic effect of samples with titanium dioxide particles was investigated at different interval times.
https://amnc.aut.ac.ir/article_79152_bb7e8cf778bca82cd65c25b4704baa20.pdf
تختجمشید
رزین آکریلیکی
نانو ذرات سیلیکا
دافع آب
سطح خود تمیزشونده
Stone
Acrylic copolymer
Silica Nanoparticles
water repellent
self-cleaning surface
per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-03-20
6
23
1669
1679
/amnc.2018.6.23.5
80028
Research Article
سنتز مشتقات نیترودار فنیل هیدرازینو کربونیل آکریلیک اسید و استفاده از آنها به-عنوان بازدارندهی خوردگی در پوششهای محافظ موقت
Synthesis of Nitro derivatives phenyl hydrazinocarbonyl acrylic acid and their use as corrosion inhibitor agent in temporary coatings
فریبرز اتابکی
atabaki@mut-es.ac.ir
1
شهرزاد جهانگیری
2
زینب ساداتی
3
دانشیار، دانشگاه صنعتی مالک اشتر
دانشجوی کارشناسی ارشد، دانشگاه صنعتی مالک اشتر
دانشجوی کارشناسی ارشد، دانشگاه صنعتی مالک اشتر
فولادهای کربن و کم آلیاژ، مواد عمده ساخت وساز هستند به ویژه به طور گسترده در توزیع آب، نفت، تولید قدرت و همچنین در صنایع شیمیایی و الکتروشیمیایی استفاده میشوند. استفاده از مولکولهای آلی به عنوان بازدارندههای خوردگی، مؤثرترین و رایجترین روشی است که برای محافظت از فلزات در مقابل آسیب خوردگی بکار میرود. در این تحقیق ترکیبهای N-فنیل هیدرازینوکربونیل آکریلیک اسید (NPHAA) و N-2و4-دی نیترو فنیل هیدرازینوکربونیل آکریلیک اسید (NDNPHAA) تهیه گردید. ترکیب (NPHAA) از واکنش فنیل هیدرازین با مالئیک انیدرید(MA) در حلال دی متیل فرم آمید (DMF) به دست آمد. ترکیب ((NDNPHAA از واکنش 2و4-دی نیتروفنیل هیدرازین با MA سنتز شد. برای شناسایی کیفی این محصولها از طیفسنجی مادون قرمز تبدیل فوریه (FT-IR) استفاده شد. سپس از ترکیبهای سنتزشده به عنوان بازدارندهی خوردگی استفاده گردید. در ادامه بازدارندههای خوردگی سنتزشده با غلظتهای 10 تا ppm 150 به روغن پایه اضافه شد و محلولهای حاصل به عنوان پوششهای محافظ موقت روی سطوح نمونههای فولاد کم کربن پوشش داده شدند. جهت مطالعهی خوردگی، قطعههای فولادی لایه نشانی شده طبق روش ASTM D-2247 در اتاقک رطوبت نسبی 100 درصد و در دمای ̊C 38 قرار داده شدند. میزان خوردگی و میزان محافظت نمونههای فولاد کم کربن پوشش داده شده با بازدارنده در زمانهای مختلف تعیین گردید. بازدارندههای سنتزشده در غلظت ppm 75 بهترین مقاومت در برابر خوردگی را از خود نشان دادند و ترکیب (NDNPHAA) عملکرد بهتری نسبت به (NPHAA) از خود نشان داد.
Carbon and low-alloy steels are the major construction materials extensively used in water distribution, petroleum, power production, as well as chemical and electrochemical industries. The use of organic molecules as corrosion inhibitors is one of the most popular, efficient, and practical methods applied extensively to protect metals against corrosion damage. In present study, N-phenyl hydrazinocarbonyl acrylic acid (N-PHAA), N-2,4-Dinitro phenyl hydrazinocarbonyl acrylic acid were synthesized from reaction of Phenyl hydrazine with maleic anhydride (MA) in DMF and reaction of 2,4-Dinitro phenyl hydrazine with maleic anhydride (MA) in acetone at room temperature. All compounds were characterized by FT-IR. Yield and temperature of thermal decomposition of products of (NPHAA) and (NDNPHAA) were obtained as 73%, 214-216 ̊C and 89%, 131-133 ̊C, respectively. Then, synthesized compounds used as the corrosion inhibitor. For next stage, 10-150 ppm of synthesized corrosion inhibitor were added to base oil and used for covering on the surfaces of low carbon steel samples as temporary protective coatings, the covered steel samples located in chamber with 100% relative humidity and at 38 ̊C their protection determined according to ASTM D-2247. Synthesized inhibitor compounds showed the best resistance against corrosion in 75 ppm and (NDNPHAA) showed the best results.
https://amnc.aut.ac.ir/article_80028_1dc615ab817cc4e170106769b0279299.pdf
فنیل هیدرازینو کربونیل آکریلیک اسید
فولاد کم کربن
روغن پایه
بازدارندهی خوردگی
N-phenyl hydrazinocarbonyl acrylic acid
low carbon steel
base oil
Corrosion inhibitor
per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-03-20
6
23
1681
1690
/amnc.2018.6.23.6
81037
Research Article
تولید داربست های نانولیفی پوسته- مغزی رسانا جهت بهبود ترمیم ضایعه نخاعی
Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury
فاطمه زمانی
fzamani@aut.ac.ir
1
محمد امانی تهران
amani@aut.ac.ir
2
آرش زمینی
zaminy_a@gums.ac.ir
3
استادیار، دانشگاه حضرت معصومهسلام الله علیها، قم
استاد، دانشکده مهندسی نساجی، دانشگاه صنعتی امیرکبیر، تهران
استادیار، گروه آناتومی، دانشکده پزشکی، دانشگاه علوم پزشکی گیلان، رشت، ایران
از آنجا که درمان ضایعات نخاعی به علت پیچیدگی سیستم اعصاب مرکزی به سادگی امکان پذیر نیست، راه کارهای بازسازی و ترمیم بافت عصب در دنیا بسیار مورد توجه واقع شده است. در این پژوهش دو نوع داربست نانولیفی سه بعدی رسانا (پلی لاکتیک گلایکولیک اسید- پلی کاپرولاکتان/پلی آنیلین: PCL/PANI-PLGA) و نارسانا (پلی لاکتیک گلایکولیک اسید- پلی لاکتیک گلایکولیک اسید PLGA-PLGA) با ساختار پوسته- مغزی طراحی و توسط یک شیوه الکتروریسی ترکیبی تولید شده است. سامانه الکتروریسی ترکیبی طراحی شده دارای یک سامانه گردابی و یک سامانه دو نازله بوده و قادر به تولید داربست استوانه ای سه بعدی با پوسته زبر نانومقیاس و مغزی آرایش یافته (میکرورشته های آرایش یافته شامل نانوالیاف آرایش یافته) می باشد. بر اساس آزمایش ها و بررسی ها در شرایط برون تنی و درون تنی، بیشترین میزان تکثیر سلول های عصبی بر روی داربست سه بعدی با مغزی رسانا مشاهده گردید. در بررسی های حیوانی نیز نتایج آزمایش حرکتی بیانگر بهبود معنادار نمونه های پیوند زده شده نسبت به نمونه های شاهد می باشد.
Since the treatment of spinal cord injury is not easily curable due to the complexity of the central nervous system, the ways of regeneration and repair of the neural tissue have been very much considered, in the world. In this study, two types of conductive (PCL / PANI- PLGA) and non-conductive (PLGA - PLGA) scaffolds with three - dimensional core–shell structure were designed and produced by combined electrospinning method. This system has a water vortex system and a two - nozzle system, and is capable of producing 3D cylindrical scaffolds with nanorough shell and aligned core (parallel microstrands including aligned nanofibers). Based on in vitro and in vivo tests, the highest proliferation of nerve cells was observed on the 3D scaffold (PCL / PANI- PLGA) with conductive core. Also in animal studies, the results of the motor test indicated a significant improvement in the transplanted samples compared to the control samples.
https://amnc.aut.ac.ir/article_81037_59faf128f9bac0c5706e41bc41e88f9f.pdf
داربست الکتروریسی شده
ساختار پوسته- مغزی سه بعدی
ترمیم نخاع
ساختار نانولیفی رسانا
Electrospun scaffold
3D core-shell structure
Spinal cord regeneration
Conductive nanofibrous structure
per
انجمن علمی رنگ ایران
مواد پیشرفته و پوشش های نوین
2322-1356
2018-03-20
6
23
1691
1701
/amnc.2018.6.23.7
81177
Research Article
تهیه رنگ خود رفع آلودگی کننده بر پایه ترکیب فتوکاتالیستی TiO2/Ag
Preparation self decontamination paint bosom photocatalytical composition TiO2/Ag
تحقیقات اخیر جهت حل مشکلات ناشی از آلودگیهای زیستمحیطی به تهیه پوششهای خود رفع آلودهکننده متمایل شده است. مهمترین و کاربردیترین مکانیسم، استفاده از فرایند فتوکاتالیستی است. در این پژوهش، نانوکامپوزیت رنگدانهای TiO2/Ag توسط روش اشباع مایع از دو ساختار رایج تیتانیوم دیاکسید (آناتاز و روتیل) با نسبت 1و2 درصد نیترات نقره سنتز شد. با استفاده از SEM-EDX و UV-VIS، مشخصات کامپوزیت بررسی شد. برای صحت توانایی کامپوزیت در تخریب آلاینده mg/L 1 رودامین B درون محلول آبی در ناحیه مرئی، از لامپ هالوژن100 وات استفاده گردید. نتیجه آن تخریب پذیری 60 درصدی Rh.B در مدتزمان min 240 بود. پراکندگی نانو کامپوزیت TiO2/Ag در پوشش رنگ تجاری آکریلیکی نیمه براق به وسیله SEM انجام شد. نتایج نشان داد که آلاینده Rh.B با غلظت 100mg/L که بر روی سطح رنگ حاوی کامپوزیت TiO2/Ag قرار دارد در مدتزمان 6 ساعت تحت تأثیر تابش لامپ هالوژن 100 وات 40 درصد تخریب شد.
Recent studies to solve environmental pollution problems are directed to self decontaminating films. The most important and applicable mechanism is useing photocatalytical procedure. In this study, TiO2/Ag dye composite was synthesized by liquid impregnation method from two prime structures of titanium dioxide (anatase and rutile), with 2% of silver nitrate. The composite was characterized by SEM-EDX and UV-Vis. To determine the accuracy of the composite potential to decompose the pollutant in visible region, a halogen lamp of 100 W was used to degrade 1 mg/L of Rh.B. The result was 60% degredation of Rh.B within 240 min. Dispersion of nano-composite TiO2/Ag in acrylic semi-gloss paint business coatings was conducted by SEM. The results indicated that 100 mg/L Rh.B on the surface of dye containing TiO2/Ag composite was 40% degraded after 6 h illumination under 100 W halogen lamp.
https://amnc.aut.ac.ir/article_81177_0f24bfecea3bc31e6f3447fdbfdec437.pdf
پوشش خود تمیز شونده
تیتانیوم دیاکسید
رزین آکریلیکی
رنگ تجاری خود رفع آلودگی کننده
Self decontaminating coating
Titanium dioxide
acrilic resin
commercial acrilic dye