انجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181221Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion batteryبررسی الکتروشیمیایی تشکیل لایه SEI در فرایند فرماسیون آند گرافیت طبیعی در باتری لیتیوم- یون1825183279347/amnc.2018.7.26.1FAمحمد زارعی جلیانیکارشناس تحقیقات باتری/ گروه ذخیره سازهای انرژی، پژوهشکده مکانیک، پژوهشگاه فضایی ایران، شیراز، ایرانشقایق بکتاشیانکارشناس تحقیقات باتری/ گروه ذخیره سازهای انرژی، پژوهشکده مکانیک، پژوهشگاه فضایی ایران، شیراز، ایرانمحسن باباییکارشناس تحقیقات باتری/ گروه ذخیره سازهای انرژی، پژوهشکده مکانیک، پژوهشگاه فضایی ایران، شیراز، ایرانعبدالمجید قاسمیمدیر گروه/ گروه ذخیره سازهای انرژی، پژوهشکده مکانیک، پژوهشگاه فضایی ایران، شیراز، ایرانرحیم اقرءریاست پژوهشکده مکانیک/ پژوهشکده مکانیک، پژوهشگاه فضایی ایران، شیراز، ایرانJournal Article20181029The solid electrolyte interphase (SEI) is a passivating film that is formed on the anode surface by electrolyte decomposition in a lithium ion battery. The proper understanding of the SEI formation process on the graphite anodes can create a wider view to overcome the challenges associated with these anodes, which lead to better cyclic performance. In this research, cyclic voltammetry, electrochemical impedance spectroscopy and cyclic charge/ discharge tests were used for graphite anode coin cell to obtain a perfect understanding of SEI formation process on the surface of graphite anode. The results of cyclic voltammetry test indicate that the large part of SEI layer is formed in the first cycle and the SEI will be stable by continued voltammetric cycles. The electrochemical impedance studies show that the charge transfer resistance (Rct) of graphite anode decreases from 122 Ω to 62.5 Ω after electrochemical cycles, which indicates the facility of the charge transfer process after the formation of the SEI layer. The results of cyclic charge/ discharge test also represent that the irreversible capacity of first cycle is consumed to form the SEI, and the reversibility has been sustained after the subsequent charge / discharge cycles.لایه فصل مشترک الکترولیتی جامد (SEI) یک فیلم سطحی است که از طریق تجزیه الکترولیت در باتری لیتیوم- یون روی سطح آند تشکیل میشود. درک صحیح از فرایند تشکیل لایه SEI در آندهای گرافیتی میتواند دید وسیعتری در خصوص غلبه بر چالشهای مربوط به این آندها ایجاد کند که منجر به عملکرد شارژ/ دشارژ بهتر خواهد شد. در این پژوهش آزمونهای ولتامتری چرخهای، طیفسنجی امپدانس الکتروشیمیایی و آزمون شارژ/ دشارژ متوالی برای سل سکهای آند گرافیتی بهکار گرفته شده است تا فهم دقیقی از فرایند تشکیل فیلم SEI روی سطح آند گرافیت به دست آید. نتایج آزمون ولتامتری چرخهای نشان میدهد که بخش اعظم لایه SEI در چرخه اول تشکیل میگردد و با ادامه چرخههای ولتامتری لایه SEI به پایداری میرسد. بررسیهای امپدانس الکتروشیمیایی نشان میدهد که مقاومت انتقال بار (Rct) آند گرافیت پس از چرخههای الکتروشیمیایی از Ω122 به Ω 5/28 کاهش یافته است که این موضوع نشاندهنده تسهیل فرایند انتقال بار پس از تشکیل لایه SEI میباشد. نتایج آزمون شارژ/ دشارژ متوالی سل سکهای آند گرافیت نیز نشان میدهد که مقدار ظرفیت غیربرگشتپذیر در چرخه اول (که صرف تشکیل لایه SEI شده) به مراتب بیشتر از مقدار ظرفیت غیربرگشتپذیر در چرخههای بعدی است. با توجه به آنکه پس از چرخه دوم، لایه SEI تقریباً به پایداری رسیده است، میتوان گفت روش فرماسیون یک سل لیتیوم- یونی با آند گرافیت میتواند در دو چرخه شارژ/ دشارژ انجام پذیرد.https://amnc.aut.ac.ir/article_79347_231bb4913cb4d8cdc13368eeacba3733.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181220Design and manufacture of ethanol gas nanobiosensor based on the GO/PANI/SnO2 compositeساخت نانوبیوسنسور گاز اتانول بر پایه کامپوزیت GO/PANI/SnO21833184281206/amnc.2018.7.26.2FAحمید رضا مشیدیدانشجوی دکترا، گروه بیو متریال، دانشکده مهندسی پزشگی، دانشگاه صنعتی امیرکبیر (پلی تکنیک تهران)، تهران، ایران0000-0001-7975-2691محمد ربیعیدانشیار، گروه بیو متریال، دانشکده مهندسی پزشگی، دانشگاه صنعتی امیرکبیر (پلی تکنیک تهران)، تهران، ایران0000-0003-1180-8729نوید ربیعیدانشجوی دکترا، گروه شیمی، دانشگاه شهید بهشتی، تهران، ایران0000-0002-6945-8541Journal Article20181106In this study, a nanobiosensor was fabricated for ethanol gas detection, and its electrochemical response to various concentrations of this gas was studied. In the first phase, in order to fabricate this nanobiosensor, the Graphene-Oxide/Polyaniline (GO/PANI) nano-composite was synthesized. Chemical composition, morphology and the structure of the nano-composites was studied by Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD). The results show that the synthesis of graphene oxide is done correctly and the polyaniline particles are well bonded on the surface of the graphene oxide sheets as physically and chemically. Owning to the formation of the correct graphene-oxide/polyaniline nano-composite the analyzes indicate that the formation of polyaniline polymer chains on the surface of graphene oxide has led to the deformation of graphene sheets, which are normally flattened and uniformed sheets into the form of non-flattened and non-uniformed sheets. In the second phase, the formed nano-composite was placed on silver coated electrodes and then, by placing the nanoparticles of tin oxide, the nanobiosensors were sensitive toward the ethanol gas. Through the amperometric experiments, responsiveness and sensitivity and selectivity of the nanobiosensors to each of ethanol, carbon dioxide, methane and ammonia gases were measured and the results showed that the sensitivity of nanobiosensor fabricated to detection of the ethanol gas is acceptable. The results of the electrochemical tests showed that the nanobiosensors also have responded slightly to ammonia and methane.در این مطالعه یک نانوبیوسنسور برای تشخیص گاز اتانول ساخته شد. برای ساخت آن در مرحله اول نانوکامپوزیت گرافن اکساید-پلی آنیلین سنتز شد و برای بررسی ترکیب شیمیایی و مورفولوژی و ساختار آن آنالیز های طیف سنجی تبدیل فوریه مادون قرمز(FT-IR)، میکروسکوپ الکترونی روبشی میدان مغناطیسی(FE-SEM)، میکروسکوپ الکترونی عبوری(HR-TEM) و پراش اشعه ایکس(XRD) انجام شد و نتایج نشان دهنده این است که سنتز گرافن اکساید به درستی انجام شده و ذرات پلی آنیلین به خوبی و به صورت فیزیکی و شیمیایی بر سطح صفحات گرافن اکساید پیوند یافته اند. آنالیزها نشان دهنده این هستند که تشکیل زنجیره های پلیمری پلی آنیلین بر سطح گرافن اکساید باعث شده که صفحات گرافن اکساید که در حالت عادی به صورت صفحات صاف و یکنواخت هستند به صورت صفحات ناصاف و غیر یکنواخت تغییر شکل یابند که علت آن تشکیل درست نانو کامپوزیت گرافن اکساید-پلی آنیلین است. در مرحله دوم نانو کامپوزیت تشکیل شده را بر روی الکترودهایی با روکش نقره قرار داده و سپس با قرار دادن نانو ذرات اکسید اکسید قلع قسمت های مختلف نانوبیوسنسور نسبت به گاز اتانول حساس شد. میزان پاسخ و حساسیت نانو بیوسنسور نسبت به هریک از گازهای اتانول، دی اکسید کربن، متان و آمونیاک، با انجام آزمایش های آمپرومتریک مورد سنجش قرار گرفت و نتایج نشان داد که حساسیت نانو بیوسنسور ساخته شده برای تشخیص گاز اتانول قابل قبول می باشد. بررسی نتایج حاصل از انجام آزمایش های الکتروشیمیایی نشان داد که نانوبیوسنسور به وجود گازهای آمونیاک و متان نیز اندکی پاسخ می دهد.https://amnc.aut.ac.ir/article_81206_5e4d401f91639b523f05bb5b1d74454c.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181221Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3شبیه سازی دینامیک مولکولی تاثیر اندازه، شکل بلورک ها و نقص بر پخش اکسیژن در SrTiO31843185081093/amnc.2018.7.26.3FAمهران قلی پور شهرکیاستادیار، گروه فیزیک، دانشکده علوم، دانشگاه اراک، اراک ، ایرانمهدیه میرزاخانیکارشناسی ارشد، گروه فیزیک، دانشکده علوم، دانشگاه اراک، اراک ، ایرانJournal Article20181119In this work, the influence of oxygen vacancy defects, crystallite shape and size on oxygen diffusion in SrTiO3 nanocubes and nanowires has been studied by molecular dynamics simulation method. The SrTiO3 nanocubes with different sizes and nanowires with different lengths and axial direction of [001], were considered for this purpose. The oxygen vacancies ranging from 0 to 5% were created by random deletion of oxygen atoms from perfect SrTiO3 structure. All of the simulations have been performed at 1000K and atmospheric pressure by using Buckingham + columbic potential. The diffusion process of oxygen atoms was investigated by analyzing the mean square displacement curves. The achieved oxygen diffusion coefficients have a good agreement with experimental reports. In addition the results show that diffusion constant of oxygen atoms in individual nanocubes are increased by decreasing the size of nanocubes. The results also show that in individual SrTiO3 nanowires, the oxygen diffusion process is increased by increasing the length of the nanowires.در این تحقیق تاثیر نقص تهی جای اکسیژن، شکل و اندازه بلورک ها بر فرایند پخش اکسیژن در استرانسیوم تیتانات با استفاده از روش دینامیک مولکولی مورد مطالعه قرار گرفته است. نانو مکعب های استرانسیوم تیتانات با اندازه های مختلف و نانوسیم ها با طول های مختلف و راستای محوری [001] برای این منظور در نظر گرفته شدند. سپس نقص اکسیژن در بازه 0 تا %5 با حذف تصادفی اتم های اکسیژن از شبکه صورت گرفت. تمام شبیه سازی ها درفشار اتمسفر و دمای1000کلوین با استفاده از پتانسیل باکینگهام + کولنی انجام پذیرفت. فرایند پخش اکسیژن با تحلیل نمودارهای میانگین مربع جابه جایی بررسی گردید. مقادیر به دست آمده برای ضریب پخش اکسیژن توافق خوبی با گزارش های تجربی داشت. همچنین نتایج نشان می دهند که در نانو مکعب های منفرد، ضریب پخش اکسیژن با کاهش اندازه بلورک ها افزایش می یابد. همچنین نتایج نشان می دهند که در نانوسیم ها با افزایش طول، فرایند پخش اکسیژن افزایش می یابد.https://amnc.aut.ac.ir/article_81093_366384f20f79cb7129296e177fd1527e.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181220Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensionsارزیابی رفتار جریان یابی دوغاب های آبی نانوذرات زیرکنیا1851185781465/amnc.2018.7.26.4FAفریبا ظرافتی شجاعکارشناسی ارشد، پژوهشگاه مواد و انرژیهودسا مجیدیاناستادیار، پژوهشکده سرامیک-پژوهشگاه مواد و انرژی-کرج-البرزلیلا نیکزاداستادیار، پژوهشگاه مواد و انرژیJournal Article20181106In this research, we tried to prepare the aqueous suspension of zirconia nanoparticles at different pH and investigate their rheological behaviors. The solids content was 40% by weight and the suspensions were prepared without additives. In this study, the pH value was varied from 3 to 8, and the rheological behavior (shear stress in terms of shear rate and viscosity in terms of shear rate) was investigated; also, the theoretical viscosity was calculated using existing relationships, and compared with experimental viscosity. Based on theoretical relationships, high viscosity values were predicted for nano zirconia suspensions, while in reality the prepared zirconia suspensions showed less viscosity and more ideal behavior. The results also indicated that the addition of Dolapix CE64 dispersant was lead to the Newtonian like behavior. The calculated rheological coefficients also proved that at pH=4 and using Dolapix, better conditions could be obtained for rheological and deflocculation and increased suspension stability.در این پژوهش تلاش شد تا دوغاب های آبی نانوذرات زیرکنیا در pHهای مختلف تهیه و رفتار جریان یابی آنها بررسی شود. مقدار ماده جامد، 40% وزنی انتخاب شد و دوغاب ها بدون افزودنی تهیه شد. در این پژوهش مقدار pH از 3 تا 8 تغییر داده شده و رفتار جریان یابی (تنش برشی بر حسب سرعت برشی و گرانروی بر حسب سرعت برشی) بررسی شد؛ همچنین گرانروی تئوری با استفاده از روابط موجود، محاسبه و با گرانروی تجربی مقایسه شد. بر اساس روابط تئوری، مقادیر گرانروی بالایی برای دوغاب های زیرکنیا پیش بینی شد؛ در حالی که در واقعیت دوغاب ها گرانروی کمتر و رفتار ایده آل تری را از خود نشان دادند. همچنین نتایج نشان داد با افزودن پراکنده ساز دولاپیکس CE64، رفتار دوغاب زیرکنیا، نیوتنی تر شد. ضرایب جریان یابی محاسبه شده نیز ثابت کرد که در 4=pH و با استفاده از دولاپیکس می توان به شرایط بهتری از جریان یابی و روانسازی رسید و پایداری دوغاب را افزایش داد.https://amnc.aut.ac.ir/article_81465_f6ee0a08c017db6e9db861f9a84707b1.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181122The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Methodمطالعه نانوساختار و خواص مغناطیسی نانوکامپوزیت های هگزافریت باریم / استرنسیوم تهیه شده به روش مایکروویو1859186982361/amnc.2018.7.26.5FAفرناز مغازهءاستادیار، گروه فیزیک، دانشکده علوم پایه، واجد اراک، دانشگاه آزاد اسلامی، اراک، ایران0000-0002-1611-5545مینا باقرنژاددانشجوی دوره کارشناسی ارشد نانوفیزیک، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران.داوود قنبریاستادیار، گروه علوم پایه، دانشگاه صنعتی اراک، اراک، ایرانJournal Article20190104We synthesized various types of barium and strontium hexaferrite nanoparticles using barium chloride and strontium nitrate salts by co-precipitation method in microwave. The solvent was either water, ethylene glycol or mixture of them with three different natural surfactants. XRD and SEM analysis were performed to evaluate the morphological characters of the products. The mean diameter of barium and strontium hexaferrite particles in all products was less than 100 nm, indicating successful formation of nanoparticles. The purity of nanoparticles was documented by FT-IR spectrometry. SEM analysis shows that the nanostructures of products would change with respect to type of solvents and surfactants. So it is possible to change the size and structure of nanoparticles for various purposes with manipulation of primary parameters. In the second phase various proportions of barium chloride and strontium nitrate were used for production of nanoproducts. All the products had pure nanoparticles of barium and strontium hexaferrite which again was confirmed by XRD analysis. VSM analysis was performed to study the ferromagnetic characteristics of the products. Hysteresis curves disclosed that all the products have ferromagnetic properties. Strontium hexaferrite nanoparticles are hard ferromagnetics and barium hexaferrite nanoparticles are soft ferromagnetics and nanocomposite barium/strontium hexaferrite nanoparticles have the intermediate ferromagnetic properties.نمونههای حاوی نانوذرات هگزافریت باریم و استرانسیوم با استفاده از دو نمک کلرید باریم و نیترات استرانسیوم به روش هم رسوبی در مایکروویو با استفاده از آب، اتیلن گلیکول و ترکیب این دو به عنوان حلال در حضور 3 عامل فعال سطحی مختلف سنتز شدند. تحلیلهای XRD و SEM به منظور ارزیابی خصوصیات ساختاری و ریختشناسی نمونهها انجام شد. قطر میانگین کمتر از 100 نانومتر برای ذرات هگزافریت باریم و استرانسیوم نشان داد که در کلیه نمونهها ساختار نانو شکل گرفته است. به کمک طیف FT-IR هر کدام از نمونهها، خلوص نانوذرات در هر نمونه اثبات شد. همچنین نتایج SEM نشان دادند که با تغییر نوع حلال و عامل فعال سطحی، خصوصیات نانوساختاری نمونهها تغییر میکند و در نتیجه امکان کنترل نانوساختار و اندازه دانهها برای کاربردهای مختلف با تغییر شرایط اولیه آزمایش وجود دارد. در مرحله بعد با استفاده همزمان از کلرید باریم و نیترات استرانسیوم و به روش همرسوبی و در مایکروویو نانوکامپوزیتهای هگزافریت باریم و استرانسیوم با درصدهای ترکیبی مختلف سنتز شدند. تحلیل XRD نشان داد که نانوکامپوزیت تهیه شده به طور خالص شامل نانوذرات هگزافریت باریم و استرانسیوم میباشد. برای بررسی خواص مغناطیسی نمونههای تهیه شده، تحلیل VSM انجام گرفت و منحنیهای هیسترزیس به دست آمده برای هگزافریت باریم و استرانسیوم و نانوکامپوزیت تهیه شده نشان دادند که تمامی نمونهها دارای خاصیت فرومغناطیسی بوده اما نانوذرات هگزافریت استرانسیوم فرومغناطیس سخت، هگزافریت باریم فرومغناطیس نرم و نانوکامپوزیت هگزافریت باریم/ استرانسیوم حالت بینابینی آنها میباشد.<br /> واژههای کلیدی: نانوذرات هگزافریت باریم، نانوذرات هگزافریت استرانسیوم، خصوصیات نانوساختاری، خواص مغناطیسی، نانوکامپوزیتhttps://amnc.aut.ac.ir/article_82361_c69b313f70e8364a3fb6d8af67be3c85.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181122Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blendتولید و مشخصهیابی نانو الیاف نوین با پایداری گرمایی از مخلوط پلیآمید66/پلیآمید- ایمید1871187982526/amnc.2018.7.26.6FAمریم جهان بیگلریدانشجوی دکتری، کرج ، پژوهشگاه استاندارد، پژوهشکده شیمی و پتروشیمی، گروه پژوهشی نساجی و چرمروح اله سمنانی رهبراستادیار، گروه پژوهشی نساجی و چرم، پژوهشکده شیمی و پتروشیمی، پژوهشگاه استاندارد، کرج، ایران0000-0001-5850-3629میثم شعبانیاناستادیار، کرج ، پژوهشگاه استاندارد، پژوهشکده شیمی و پتروشیمی،گروه پژوهشی پتروشیمیJournal Article20181219Using aliphatic polyamides in electrospinning is very interesting due to their unique properties such as processability. But these polymers have some disadvantages of low dimensional stability and poor thermal stability that limited their use. To solve this problem, various methods such as polymer blending have been suggested. In this research, for the first time, a newly synthesized poly (amide-imide) (PAI) polymer was added to polyamide 66 (PA66) and nanofibers fabricated from PA66/PAI blend with different amounts of PAI polymer. Morphology, dynamical-mechanical properties and thermal stability of nanofibers were analyzed by SEM, DMTA, and TGA, respectively. SEM images revealed that the PA66/PAI nanofibers with uniform structure and without beads were prepared even for nanofibers containing 50% PAI. Moreover, with increasing PAI polymer content in PA66/PAI solution, the average nanofiber diameter increased from 319±66 nm for neat PA66 to 522±65 nm for nanofibers containing 50% PAI polymer. DMA results showed that the storage modulus of PA66/PAI nanofibers in both glassy and rubbery regions were higher than that of neat PA66 nanofibers. At 60 °C, the storage modulus values for neat PA66 nanofibers and PA66/PAI containing 50% PAI were 16.85 MPa and 70 MPa, respectively, showing about four times increase. Furthermore, by incorporating PAI polymer into PA66 matrix, glass transition temperature was moved to higher temperatures. TGA data indicated that with increasing the content of PAI polymer, thermal stability of PA66/PAI nanofibers improved significantly; 65 °C increase in Tmax was obtained for nanofibers containing 50% PAI as compared to neat PA66 nanofibers.استفاده از پلیآمیدهای آلیفاتیک در تهیه نانو الیاف با توجه به خاصیت فرآیندپذیری مطلوب و قابلیت بالای الکتروریسی به شدت مورد توجه است. اما این پلیمرها پایداری گرمایی بالایی ندارند که این امر استفاده از آنها را در برخی از کاربردها با محدودیت مواجه ساخته است. یکی از روشهای حل این مشکل مخلوط کردن با پلیمرهای دیگر است. برای این منظور در پژوهش حاضر برای اولین بار از پلیمر پلی آمید-ایمید (PAI) جدید سنتز شده برای مخلوط کردن با پلیآمید66 خالص (PA66) استفاده شد و نانو الیاف PA66 و PA66/PAI حاوی مقادیر مختلف پلیمر PAI با استفاده از روش الکتروریسی تهیه شدند. ریختشناسی، خواص مکانیکی- دینامیکی و پایداری گرمایی نانو الیاف با میکروسکوپ الکترونی پویشی، آنالیز مکانیکی- دینامیکی و گرماسنجی وزنی ارزیابی شد. نتایج نشان میدهد که با افزایش میزان پلیمر PAI در محلول ریسندگی، قطر متوسط نانو الیاف از 66±319 نانومتر در نمونه PA66 به 65±522 نانومتر در نمونه حاوی 50% پلیمرPAI افزایش یافته است. آنالیز مکانیکی- دینامیکی نشان میدهد که مقدار مدول ذخیره در دمای °C 60، از حدود 85/16 مگاپاسکال در نمونه PA66 به حدود 70 مگاپاسکال در نمونه حاوی 50% پلیمر PAI افزایش یافته و چهار برابر شده است. همچنین با افزودن پلیمر PAI به پلیمر PA66، دمای انتقال شیشهای به مقادیر بالاتر منتقل شده است. با افزایش میزان پلیمر PAI در ماتریس PA66، پایداری گرمایی نانو الیاف به میزان قابل ملاحظهای بهبود یافته و دمای Tmax در نمونه PA66/PAI-50 نسبت به نمونه PA66، °C 65 افزایش را نشان میدهد.https://amnc.aut.ac.ir/article_82526_5ad40d01bac62e353d847a74559d9771.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-135672620181122Prediction of Nano-Droplet Spreading on the Surface using the Multivariate Non-Linear Regressionپیشبینی پخش شدن نانو قطرات بر روی سطح با استفاده از مدل رگرسیون غیر خطی چند متغیره1881188682720/amnc.2018.7.26.7FAهانیه پناهیاستادیار، گروه ریاضی و آمار، واحد لاهیجان، دانشگاه آزاد اسلامی، صندوق پستی 1616، لاهیجان، ایران.0000-0003-2431-1463سعید اسدیدانشیار، گروه مکانیک، دانشکده مهندسی دانشگاه پیام نور، تهران، ایران.0000-0002-1484-2052Journal Article20181221Creating of resistant and anti-corrosion coatings in nano dimensions are widely used in various industries. The quality of the coating is related to the collision of the nano droplet on the surface and then spreading on it. In many cases, the oblique surface is in the front of the spray nozzle, and then the nano droplet collides obliquely with a surface. Due to expensive and time consuming of the experiments and simulations, model determination for illustrating the effects of the factors on the nano-droplet spreading is very important. In this research, the multivariate regression model is being proposed for predicting the nano-droplet spreading data. The nano-droplet spreading has been depended to the speed and impact angle on the surface and that for this reason five models have been considered. The results for comparing the provided models show that the proposed non-linear regression has the most efficient and lowest error and has a high fit with optimal output. Also, the residual analysis of the proposed model accepts the normality assumption. Moreover, the correlation between the speed and nano-droplet spreading is 0.95 which is at a very high level.ایجاد پوششهایی مقاوم و ضد خوردگی در ابعاد نانو، استفاده گسترده و روز افزونی در صنایع مختلف دارد. پوشش ایجاد شده وابسته به برخورد نانو قطره با سطح و سپس پخششدن آن بر روی سطح است. در بسیاری از موارد سطح به صورت مورب در مقابل نازل پاشش قرار گرفته و زاویه برخورد نانو قطره با سطح به صورت مایل میباشد. به دلیل وجود هزینه زیاد و زمان بر بودن آزمایشات تجربی و شبیهسازیهای دینامیکی، تعیین مدلی برای نشان دادن تاثیرات عوامل موثر بر پخش نانو قطره حائز اهمیت است. در این مطالعه با استفاده از مدل رگرسیون چند متغیره نسبت به پیشبینی پخش شدن نانو قطره اقدام گردیده است. میزان پخش شدن نانو قطره به سرعت و زاویه برخورد قطره با سطح بستگی دارد که برای این منظور پنج مدل مختلف در نظر گرفته شده است. نتایج مقایسه مدلهای ارائه شده، نشان میدهد که مدل رگرسیون غیرخطی پیشنهادی، دارای بیشترین بازده و کمترین خطا بوده است و تطابق بالایی با خروجی مطلوب دارد. همچنین آنالیز باقیماندهها نشاندهنده پذیرش نرمال بودن آن ها در مدل انتخابی است. علاوه بر این مشاهده شده است که همبستگی بین سرعت و میزان پخش شدن نانو قطره 0.95 است که در سطح بسیار بالایی قرار دارد.https://amnc.aut.ac.ir/article_82720_c9bb1c02a31be48b5eea0300524426af.pdf