تاثیر چگالی جریان بر میکروساختار و رفتار خوردگی پوشش کامپوزیتی Co-P-nanoAl2O3

نوع مقاله : مقاله پژوهشی

نویسندگان

1 کارشناسی ارشد، بخش مهندسی مواد، دانشکده فنی و مهندسی، دانشگاه شهید باهنر، کرمان، ایران

2 استاد، بخش مهندسی مواد، دانشکده فنی و مهندسی، دانشگاه شهید باهنر، کرمان، ایران

3 استادیار، بخش مهندسی مواد، دانشکده مهندسی مکانیک و مواد، دانشگاه تحصیلات تکمیلی صنعتی و فناوری پیشرفته، کرمان، ایران

/amnc.2020.8.31.5

چکیده

در این تحقیق پوشش کامپوزیتی Co-P-nanoAl2O3 با استفاده از تکنیک رسوب‌دهی الکتریکی به روش جریان مستقیم بر روی زیر لایه AISI 430 پوشش داده شد. میکروساختار و رفتار خوردگی پوشش های ایجاد شده در دانسیته جریان های متفاوت (mA/cm210 و mA/cm2 15 و mA/cm220 و mA/cm2 25) مورد مطالعه قرار گرفت. به منظور بررسی مورفولوژی پوشش و آنالیز پوشش تشکیل شده به ترتیب از دستگاه میکروسکوپ الکترونی روبشی (SEM) و میکرو آنالیز EDS استفاده شد. نتایج نشان داد که پوشش تشکیل شده در دانسیته جریان mA/cm2 15 کاملا یکنواخت و پیوسته است. به منظور بررسی مقاومت به خوردگی، آزمون‌ پلاریزاسیون پتانسیودینامیک در محلول آبی 5/3 درصدوزنی NaCl بر روی نمونه های پوشش دار و بدون پوشش اعمال گردید. نتایج آزمون های پلاریزاسیون تافل و الکتروشیمیایی نیز با تصاویر میکروسکوپی مطابقت داشت و نشان داد که پوشش تشکیل شده در حمام با دانسیته جریان mA/cm2 15 بیشترین مقاومت به خوردگی را دارد.

کلیدواژه‌ها


[1] M. Vaezi, S. Sadrnezhaad, and L. Nikzad, "Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 315, (2008), 176-182.
[2] I. Baskaran, T. S. Narayanan, and A. Stephen, "Pulsed electrodeposition of nanocrystalline Cu–Ni alloy films and evaluation of their characteristic properties," Materials Letters, vol. 60,( 2006), 1990-1995.
[3] Y. Yao, S. Yao, L. Zhang, and H. Wang, "Electrodeposition and mechanical and corrosion resistance properties of Ni–W/SiC nanocomposite coatings," Materials Letters, vol. 61,( 2007), 67-70.
[4] U. Sarac, R. M. Öksüzoğlu, and M. C. Baykul, "Deposition potential dependence of composition, microstructure, and surface morphology of electrodeposited Ni–Cu alloy films," Journal of Materials Science: Materials in Electronics, vol. 23, (2012) ,2110-2116.
[5] D. Goranova, G. Avdeev, and R. Rashkov, "Electrodeposition and characterization of Ni–Cu alloys," Surface and Coatings Technology, vol. 240,( 2014), 204-210.
[6] E. Podlaha, C. Bonhote, and D. Landolt, "A mathematical model and experimental study of the electrodeposition of Ni-Cu alloys from complexing electrolytes," Electrochimica acta, vol. 39, (1994), 2649-2657.
[7] H. Gül, F. Kılıç, S. Aslan, A. Alp, and H. Akbulut, "Characteristics of electro-co-deposited Ni– Al2O3 nano-particle reinforced metal matrix composite (MMC) coatings," Wear, vol. 267, (2009), 976-990.
[8] E. Rudnik, L. Burzyńska, Ł. Dolasiński, and M. Misiak, "Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide," Applied Surface Science, vol. 256,( 2010), 7414-7420.
 
[9] ف. بیگدلی، س.ر. اله کرم، بررسی مقاومت به خوردگی پوشش کامپوزیتی الکترولس نیکل با نانو ذراتSiC ، پژوهش نفت، (1387) 57، 25-29.
[10] ی. ذاکری نیا، ر. بازرگان لاری، اعمال پوشش نانو کامپوزیتی Ni-B-ZrO2 به روش الکترولس بر روی فولاد CK45 و بررسی خواص تریبولوژیکی، (1395) 10، 88-99.
[11] Y. Chen, Y. Hao, W. Huang, Y. Ji, W. Yang, X. Yin, Y. Liu, X. Ling, Corrosion behavior of Ni-P-nano-Al2O3 composite coating in the presence of anionic and cationic surfactants, Surface and Coatings Technology, 310 (2017), 122-128.
[12] S. Afroukhteh, C. Dehghanian, M. Emamy, Preparation of electroless Ni–P composite coatings containing nano-scattered alumina in presence of polymeric surfactant, Progress in Natural Science: Materials International 22 (2012), 318–325.
[13] E. Khoran, M. Zandrahimi, H. Ebrahimifar, Microstructure and Oxidation Behavior of Ni–TiO2 Composite Coating at High Temperature, Oxidation of Metals, 91 (2018), 177-189.
[14] M. Abaei, M. Zandrahimi, H. Ebrahimifar, Microstructure and oxidation of Ni–Fe2O3 composite coating on ISI 304 stainless steel, International Journal of Materials Research, 110 (2019), 253-260.
[15] F. Saeidpour, M. Zandrahimi, H. Ebrahimifar, Effect of ZrO2 particles on oxidation and electrical behavior of Co coatings electroplated on ferritic stainless steel interconnect, Corrosion Science, 153 (2019), 200-212.
 
[16] U. Sarac and M. C. Baykul, "Morphological and microstructural properties of two-phase Ni–Cu films electrodeposited at different electrolyte temperatures," Journal of Alloys and Compounds, vol. 552, (2013), 195-201.
[17] R. Saha and T. Khan, "Effect of applied current on the electrodeposited Ni–Al2O3 composite coatings," Surface and Coatings Technology,vol. 205,(2010),890-895.
[18] M. K. Tripathi and V. Singh, "Properties of electrodeposited functional Ni–Fe/AlN nanocomposite coatings," Arabian Journal of Chemistry, (2015).
[19] Li Y, Jiang H, Huang W, Tian H. "Effects of peak current density on the mechanical properties of nanocrystalline Ni–Co alloys produced by pulse electrodeposition." Applied Surface Science 254(21) ,(2008), 6865-6869.
[20] H. Gül, F. Kılıç, M. Uysal, S. Aslan, A. Alp, and H. Akbulut, "Effect of particle concentration on the structure and tribological properties of submicron particle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition," Applied Surface Science, vol. 258,( 2012), 4260-4267.
[21] E.A. Pavlatou, M. Stroumbouli, P. Gyftou, N. Spyrellis, "Hardening Effect Induced by Incorporation of SiC Particles in Nickel electrodeposites," Journal of Applied Electrochemistry, Vol 36, (2006) 385-394.
[22] A. Cziraki., B. Fogarassy, I. Gerocs, E. Toth-Kadar, I. Bakonyi, "Microstructure and growth of electrodeposited nanocrystalline nickel foils", Journal of Materials Science, Vol.29, (1994),4771-4777.
[23] N. K. Shrestha, T. Takebe, and T. Saji, "Effect of particle size on the co-deposition of diamond with nickel in presence of a redox-active surfactant and mechanical property of the coatings," Diamond and related materials, vol. 15,( 2006), 1570-1575.
[24] H.-K. Lee, H.-Y. Lee, and J.-M. Jeon, "Codeposition of micro-and nano-sized SiC particles in the nickel matrix composite coatings obtained by electroplating," Surface and Coatings Technology, vol. 201,(2007), 4711-4717.
[25] T. Borkar and S. P. Harimkar, "Effect of electrodeposition conditions and reinforcement content on microstructure and tribological properties of nickel composite coatings," Surface and coatings Technology, vol. 205, (2011), 4124-4134.
[26] Y. Yao, S. Yao, and L. Zhang, "Preparation, mechanical properties and wear resistance of Ni– W/SiC nanocomposite coatings," Materials Science and Technology, vol. 24, (2008), 237-240.
[27] Y. Yao, S. Yao, L. Zhang, and H. Wang, "Electrodeposition and mechanical and corrosion resistance properties of Ni–W/SiC nanocomposite coatings," Materials Letters, vol. 61,( 2007), 67-70.
[28] M. Haciismailoglu and M. Alper, "Effect of electrolyte pH and Cu concentration on microstructure of electrodeposited Ni–Cu alloy films," Surface and Coatings Technology, vol. 206, (2011), 1430-1438.
[29] M. Allahyarzadeh, M. Aliofkhazraei, A. S. Rouhaghdam, and V. Torabinejad, "Electrodeposition of Ni–W–Al2O3 nanocomposite coating with functionally graded microstructure," Journal of Alloys and Compounds, vol. 666, (2016), 217-226.
[30] Q. Li, X. Yang, L. Zhang, J. Wang, and B. Chen, "Corrosion resistance and mechanical properties of pulse electrodeposited Ni–TiO2 composite coating for sintered NdFeB magnet," Journal of Alloys and Compounds, vol. 482,(2009), 339-344.
[31] R. Mousavi, M. Bahrololoom, and F. Deflorian, "Preparation, corrosion, and wear resistance of Ni‐Mo/Al composite coating reinforced with Al particles," Materials & Design, vol. 110, (2016), 456-465.
[32] Q. Feng, T. Li, H. Teng, X. Zhang, Y. Zhang, C. Liu, et al., "Investigation on the corrosion and oxidation resistance of Ni–Al2O3 nano-composite coatings prepared by sediment codeposition," Surface and Coatings Technology, vol. 202, (2008), 4137-4144.
[33] Y.B. Zhou, B.Y. Qian, H.J. Zhang, “Al particles size effect on the microstructure of the codeposited Ni–Al composite coatings”, Thin Solid Films 517, (2009), 3287–3291.