@article { author = {Oliaie, Hadi and Forootan, Hamed and Kalaee, Mohammad Reza}, title = {Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles}, journal = {Advanced Materials and New Coatings}, volume = {9}, number = {33}, pages = {2434-2450}, year = {2020}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2020.9.33.7}, abstract = {The low strength of epoxy adhesives as well as their non-adhesion to aluminum surfaces have posed a serious challenge to the use of this resin in some special applications, including the aerospace industry. In order to improve tensile strength, two types of rubber acrylonitrile butadiene styrene (ABS) and methacrylate butadiene styrene (MBS) rubber modifiers were used. In order to better adherence of epoxy composites to the aluminum alloy AA2024-T3, the cerium conversion coating was used in optimal conditions. The results of electrochemical impedance spectroscopy and polarization curve showed that the obtained cerium conversion coating at 20 g / l cerium nitrate concentration, pH of 3.5, and 15 min of immersion time, has provided a uniform coating on the surface with the highest corrosion resistance and adhesion properties. Besides, the images of field emission scanning electron microscopy showed the formation of uniform cerium conversion coatings on the sample surface. The results of the stress-strain experiment showed that the addition of 4% of ABS and 1% of GO increased the tensile strength of up to 70% and 47%, respectively. Using conversion coatings resulted in a 60% increase of adhesion properties in the lap shear test. The pull-off test also proved a significant rise in adhesion strength due to the presence of conversion coatings.}, keywords = {Epoxy resin,Toughness,graphene oxide,Cerium conversion coating}, title_fa = {ارزیابی پارامتر های پوشش تبدیلی سریومی بر خواص استحکام و چسبندگی چسب های اپوکسی بهینه شده با الاستومر های بوتادین و ذرات گرافن اکساید}, abstract_fa = {استحکام پایین چسب‌های اپوکسی و همچنین عدم چسبندگی آن‌ها به سطوح آلومینیومی استفاده از این رزین را در برخی کاربردهای خاص از جمله صنایع هوایی با چالش جدی مواجه کرده است. به منظور بهبود استحکام کششی از دو نوع اصلاح‌کننده لاستیکی اکریلونیتریل بوتادین استایرن (ABS) و متاکریلات بوتادین استایرن (MBS) استفاده شد، به بهترین نمونه حاصل ذرات اکسید گرافن (GO) به میزان یک و دو درصد اضافه شده و در نهایت بهترین نمونه حاصل به لحاظ فیزیکی و مکانیکی انتخاب شد، در ادامه به منظور چسبندگی بهتر کامپوزیت اپوکسی به آلیاژ آلومینیم AA2024-T3 ، از پوشش تبدیلی سریمی در شرایط بهینه استفاده شد . نتایج حاصل از آزمون طیف‌سنجی امپدانس الکتروشیمیایی و منحنی پلاریزاسیون نشان داد که پوشش تبدیلی سریم در غلظت 20 گرم بر لیتر سریم نیترات، pH برابر 5/3 و زمان غوطه‌وری 15 دقیقه به دلیل تشکیل پوشش یکنواخت بر روی سطح بالاترین میزان مقاومت به خوردگی و چسبندگی را ایجاد کرده است، هم‌چنین، تصاویر میکروسکوپ الکترونی گسیل میدانی تشکیل پوشش تبدیلی سریم به‌صورت یکنواخت بر روی سطح نمونه را نشان می‌دهد. نتایج حاصل از آزمون تنش-کرنش نیز نشان داد که استحکام کششی نمونه‌ی حاوی 4 درصد ABS به میزان 70 درصد افزایش داشته و با افزودن 1 درصد GO به آلیاژ، استحکام آن 47 درصد افزایش پیدا می‌کند. همچنین افزایش 114 درصدی چسبندگی در حضور پوشش‌های تبدیلی نسبت به نمونه‌های بدون پوشش در آزمون استحکام برشی مشاهده شد. آزمون چسبندگی نیز افزایش قابل‌توجه استحکام چسبندگی را در حضور پوشش‌های تبدیلی سریمی نشان می‌دهد.}, keywords_fa = {رزین اپوکسی,چقرمه کردن اپوکسی,گرافن اکساید,پوشش‌های تبدیلی سریمی}, url = {https://amnc.aut.ac.ir/article_114712.html}, eprint = {https://amnc.aut.ac.ir/article_114712_f5a210c9a0ca99861f9dba683ce50547.pdf} }