@article { author = {Farrokhi, Mohammad and Zaarei, Davood}, title = {Self-Stratifying Metallic Coating Formulation Based on Polyurethane using Taguchi Experimental Design Method}, journal = {Advanced Materials and New Coatings}, volume = {9}, number = {34}, pages = {2490-2500}, year = {2020}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2020.9.34.5}, abstract = {Abstract: In this study, self-stratified metallic surface coating based on polyurethane resin consisting of single-layer polymer acrylic with high gloss, without the use of clear coat, with the aim of covering industrial parts, home appliances and even car body repair was designed and formulated. The purpose of the work was to reduce the amount of consumables, work error and coverage time compared to the conventional and traditional coating (two layers of coating consisting of metallic base coat and clear coat). To design the experiments (DOE), the Taguchi method was used to optimize the type and amount of the main raw materials, including polyol acrylic resin type, cellulose acetate butyrate and wax. Various tests such as adhesion, gloss, hardness, abrasion salt fog and immersion were performed on the formulated coatings. The results showed, for example, an optimal adhesion rate of (5B), a gloss about 89%, mottling level of 51, and hardness of 210 seconds. Also, no sedimentation was observed in the liquid state and the results of moisture resistance and water immersion tests were acceptable based on standard criteria, compared to conventional double-layered samples.}, keywords = {Self-stratifying,metallic paint,Acrylic-polyol,Wax,cellulose-acetate-butyrate}, title_fa = {فرمولاسیون پوشش متالیک خود لایه شونده بر پایه پلی‌یورتان با بهره گیری از روش طراحی آزمایش تاگوچی}, abstract_fa = {در این پژوهش، پوشرنگ رویه متالیک از نوع خود لایه شونده بر پایه رزین پلی‌یورتان متشکل از پلی ال اکریلیک بصورت تک لایه و با براقیت بالا، بدون استفاده از لایه لاک بیرنگ (لایه شفاف فاقد رنگدانه)، با هدف پوشش دهی قطعات صنعتی و لوازم خانگی و بعضا تعمیر بدنه خودرو بالانس و طراحی شد. هدف از انجام کار، کاهش میزان مواد مصرفی، خطای کار و زمان پوشش دهی نسبت به حالت مرسوم و سنتی(بصورت دو لایه پوشش متشکل از پوشش میانی متالیک و یک لاک بیرنگ شفاف) بوده است. برای طراحی آزمونها (DOE) از روش تاگوچی جهت بهینه یابی نوع و مقدار مواد اولیه اصلی تاثیرگذار بر پوشش اعم از نوع رزین آکریلیک پلی ال، سلولز یوتیرات استات و وکس استفاده شد. آزمونهای مختلف نظیر چسبندگی، براقیت، سختی، میزان ابلقی شدن، مه نمک، غوطه وری بر روی پوشرنگهای بهینه شده انجام شد. نتایج برای نمونه بهینه نشان دهنده میزان چسبندگی درجه (5B)، براقیت در حدود 89 درصد، میزان ابلقی شدن در سطح 51 و سختی در حد 210 ثانیه با مقیاس پرسوز بود. همچنین هیچ گونه رسوب و ته نشینی در حالت مایع مشاهده نشد و نتایج آزمونهای مقاومت در برابر رطوبت و غوطه وری در آب، بر اساس معیارهای استاندارد در قیاس با نمونه های دولایه مرسوم، قابل قبول و تایید بودند.}, keywords_fa = {خود لایه شونده,پوشرنگ متالیک,پلی ال اکریلیک,واکس,سلولز استات بوتیرات}, url = {https://amnc.aut.ac.ir/article_119155.html}, eprint = {https://amnc.aut.ac.ir/article_119155_b0bd85c25611a9eaef902f8bfb5b47a4.pdf} }