@article { author = {Yousefzadeh, Samira and Akbari, Milad}, title = {Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection}, journal = {Advanced Materials and New Coatings}, volume = {9}, number = {35}, pages = {2520-2530}, year = {2021}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2021.9.35.1}, abstract = {In this research, electrochemical sensor based on the polyzincon-modified glassy carbon electrode was fabricated to detect the dopamine. For this purpose, the glassy carbon electrode was modified by using cyclic voltammetry between -1 and 2.2 V and scan rate of 0.07 V/s for 6 cycles in a phosphate buffer (0.1 M) at pH 7 containing 0.1 mM zincon. Investigation on electrocatalytic activity and the electrochemical active surface showed that the surface area has increased for the modified electrode as compared to the glassy carbon electrode. The electrochemical impedance spectroscopy indicated the enhanced electron transfer between the electrode and redox probe for the polyzincon modified electrode. Based on the results, the anodic and cathodic peak currents increased with the scan rates and linear relation between peak current and scan rate and its square root indicated a dual character containing diffusion and adsorption-controlled processes on the surface. Detection of dopamine on surface of the modified electrode by differential pulse voltammetry method showed two linear range of 0.2-1 μM and the range of 1-100 μM with a limit of detection of 0.06 μM. Also, relative standard deviation for 5 replicates measurements in 20 μM dopamine solution was calculated as 4.5%. The designed sensor has advantages such as simplicity, low cost, high accuracy and sensitivity, and a suitable limit of detection that is able to compete with the latest electrodes in dopamine detection.}, keywords = {Polyzincon,Dopamine,Electrochemical sensor,Differential pulse voltammetry}, title_fa = {ساخت حسگر الکتروشیمیایی برپایه نانولایه پلی‎زینکون برای تشخیص دوپامین}, abstract_fa = {در این پژوهش، حسگر الکتروشیمیایی برپایه‎ی الکترود کربن شیشه‌ای اصلاح‌شده با پلی‎زینکون برای تشخیص الکتروشیمیایی دوپامین ساخته شد. بدین منظور، الکترود کربن شیشه‌ای با استفاده از ولتامتری چرخه‌ای بین ولتاژ ۱- تا ۲/۲ ولت و سرعت روبش 07/0 ولت بر ثانیه برای ۶ چرخه در بافر فسفات (1/0 مولار) در 7 pH حاوی 1/0 میلی‎مولار زینکون اصلاح شد. بررسی فعالیت الکتروکاتالیستی و سطح فعال الکتروشیمیایی نشان داد که مساحت سطح الکترود اصلاح شده در مقایسه با الکترود کربن شیشه‌ای افزایش یافته است. طیف‌سنجی امپدانس الکتروشیمیایی، بهبود انتقال الکترون برای الکترود اصلاح‌شده با پلی‎زینکون را به نمایش گذاشت. براساس نتایج، جریان قله آندی و کاتدی با سرعت روبش افزایش یافت و رابطه خطی بین جریان قله و سرعت روبش و مجذور آن حاکی از رفتار دوگانه شامل کنترل فرآیند نفوذی و جذبی بر روی سطح بود. تشخیص دوپامین بر روی سطح الکترود اصلاح شده به وسیله روش ولتامتری پالس تفاضلی، دو بازه‎ی خطی 2/0 تا 1 میکرومولار و 1 تا 100 میکرومولار با حد تشخیص 06/0 میکرومولار را نشان داد. همچنین، انحراف استاندارد نسبی برای 5 تکرار آزمایش در محلول 20 میکرو‎مولار حاوی دوپامین، 5/4 درصد محاسبه شد. حسگر طراحی شده دارای مزایایی همچون سادگی، قیمت ارزان، دقت و حساسیت بالا و حد تشخیص مناسب می‌باشد که توانایی رقابت با جدیدترین الکترود‎ها در حسگری دوپامین را داراست.}, keywords_fa = {پلی‎زینکون,دوپامین,حسگر الکتروشیمیایی,ولتامتری پالس تفاضلی}, url = {https://amnc.aut.ac.ir/article_126409.html}, eprint = {https://amnc.aut.ac.ir/article_126409_e126e73ad2b8cfab1d303484ad332962.pdf} }