@article { author = {Ahmadi zadegan, Zahra and daneshmand, hamid and Araghchi, Masoud}, title = {Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steel}, journal = {Advanced Materials and New Coatings}, volume = {10}, number = {38}, pages = {2792-2804}, year = {2021}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {amnc.2021.10.38.3}, abstract = {Superhydrophobicity is the tendency of the surface to repel water droplets. Due to this unique property, superhydrophobic surfaces can be used in many areas such as waterproof surfaces, anti-corrosion surfaces, antifreeze surfaces, and anti-corrosion surfaces. In the present study, the superhydrophobic surface was generated using the spray pyrolysis method. The precursor to the coating process was stearic acid-modified alumina nanoparticles dispersed in alcohol. Increasing the deposition temperature, especially after 250 oC, reduced the roughness and hydrophobicity of the samples. Examination of deposition time showed that there is an optimal time for coating. In addition to experimental studies, the electronic properties and the mechanism of stearic acid adsorption on alumina surfaces were investigated with density functional theory (DFT) and molecular dynamics (MD) simulations. The superhydrophobic surface on the stainless steel substrate was obtained using a stearic acid-modified alumina suspension in 2-propanol alcohol at a temperature of 100 oC and 90 s deposition time with a water contact angle of about 160 °.}, keywords = {superhydrophobicity,Deposition temperature,spray pyrolysis,Atomic simulation,Stainless steel}, title_fa = {بررسی تاثیر دمای لایه نشانی روش اسپری پایرولیز روی پوشش‌های فوق آب‌گریزی نانو ذرات آلومینا اصلاح شده با استئاریک اسید بر روی فولاد زنگ نزن}, abstract_fa = {فوق آب‌گریزی، تمایل سطح برای دفع قطرات آب است. به دلیل این خاصیت منحصربه‌فرد، از سطوح فوق آب‌گریز می‌توان در بسیاری از حوزه‌ها مانند سطوح ضدآب، سطوح ضدمه، سطوح ضدیخ و سطوح ضدخوردگی استفاده کرد. در مطالعه حاضر، سطح فوق آب‌گریز با استفاده از روش اسپری پایرولیز تولید شد. پیش ماده فرآیند لایه نشانی، نانو ذرات آلومینا اصلاح‌شده با استئاریک اسید بود که در الکل پراکنده شد. افزایش دمای لایه نشانی به‌خصوص از دمای oC 250 به بعد سبب کاهش زبری و آب‌گریزی نمونه‌ها شد. بررسی زمان لایه نشانی نشان داد که زمان بهینه‌ای برای لایه نشانی وجود دارد. علاوه بر بررسی‌های تجربی، خواص الکترونیکی و مکانیسم جذب استئاریک اسید بر سطح آلومینا با شبیه‌سازی‌های اتمی نظریه تابعی چگالی (DFT) و دینامیک مولکولی (MD) بررسی شد. سطح فوق آب‌گریز روی زیرلایه فولاد زنگ نزن با استفاده از سوسپانسیون آلومینای اصلاح شده توسط استئاریک اسید در الکل 2-پروپانول در دما oC100 و زمان s90 لایه نشانی با زاویه تماس با آب حدود 160 درجه به دست آمد.}, keywords_fa = {فوق آب‌گریز,دمای لایه نشانی,اسپری پایرولیز,شبیه‌سازی اتمی,فولاد زنگ نزن}, url = {https://amnc.aut.ac.ir/article_146194.html}, eprint = {https://amnc.aut.ac.ir/article_146194_1416369440809c002ca7bdf06bcdf8a8.pdf} }