@article { author = {Moradi, Omid and Daneshmand Sharabaf, Iman}, title = {Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics}, journal = {Advanced Materials and New Coatings}, volume = {10}, number = {39}, pages = {2908-2923}, year = {2022}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {amnc.2022.10.39.5}, abstract = {In this study, zeolite was synthesized and modified using 3-aminopropyl trimethoxy silane. The synthesized materials were identified by FT-IR, SEM, and XRD analyzes and used to separate direct red 80 (DR80) as an organic contaminant from water. The effect of various important factors such as the amount of adsorbent, initial concentration of contaminants and pH was investigated. The results showed that the modified adsorbent had a higher adsorption capacity than the row adsorbent. The amount of dye adsorption is high at lower pH values. The percentage of DR80 dye removal was complete under optimal conditions. Increasing the amount of adsorbent and decreasing the pH increases the percentage of dye removal and increasing the concentration of contaminant reduces the dye removal in the process. The Langmuir, Freundlich and Tempkin isotherm models were used. Isotherm data showed that the adsorption process followed the Langmuir isotherm model. Also, pseodu-first-order, pseodu-second-order and intraparticle diffusion kinetics models were used to investigate the adsorption kinetics. Dye adsorption followed pseodu-second-order kinetics. The results showed that the modified adsorbent could be used as a suitable adsorbent with high adsorption capacity for dye removal from aqueous media.}, keywords = {Pollutant separation,Dye,modified zeolite,Aqueous medium,Direct red 80}, title_fa = {جداسازی آلاینده آلی (رنگزا) با استفاده زئولیت سدیم اصلاح سطح شده: ایزوترم و سینتیک رنگبری}, abstract_fa = {در این تحقیق، زئولیت سنتز و با 3-آمینوپروپیل تری متوکسی سیلان اصلاح شد. مواد سنتز شده به وسیله آنالیزهای FT-IR، SEM وXRD شناسایی و برای جداسازی آلاینده آلی رنگزای قرمز مستقیم 80 (DR80) استفاده گردید. اثر عوامل مهم و مختلف مانند مقدار جاذب، غلظت ابتدایی آلاینده و pH مورد بررسی قرار گرفت. نتایج نشان داد که جاذب اصلاح شده نسبت به جاذب خام ظرفیت جذب بیشتری دارد. مقدار جذب رنگزا در مقادیر pH پایین تر زیاد است. درصد حذف رنگزای DR80 در شرایط بهینه به صورت کامل بود. افزایش مقدار جاذب و کاهش pH موجب افزایش درصد رنگبری می شود و افزایش غلظت آلاینده، موجب کاهش درصد حذف رنگزا در فرآیند است. مدل های ایزوترم لانگمویر، فروندلیش و تمپکین برای داده های آزمایشگاهی استفاده شد. داده های ایزوترم نشان داد که فرآیند جذب با مدل ایزوترم لانگمویر مطابقت دارد. همچنین، مدل های سینتیک شبه مرتبه اول، شبه مرتبه دوم و نفوذ درون ذره ای برای بررسی سینتیک جذب استفاده شد. جذب رنگزا از سینتیک شبه مرتبه دوم پیروی کرد. نتایج نشان داد که جاذب اصلاح شده می تواند به عنوان یک جاذب مناسب با ظرفیت جذب بالا برای رنگبری از محلول های آبی رنگی باشد.}, keywords_fa = {جداسازی آلاینده,رنگزا,زئولیت اصلاح شده,محیط آبی,رنگزای قرمز مستقیم 80}, url = {https://amnc.aut.ac.ir/article_154694.html}, eprint = {https://amnc.aut.ac.ir/article_154694_72fea6dd49ce04505c959949107898b7.pdf} }