@article { author = {Ghasali, Ehsan and Marzbanpour, Amir Hossein}, title = {Comparison between the effects of microwave and conventional sintering on the microstructure and mechanical properties of metal-base Al-WC composites}, journal = {Advanced Materials and New Coatings}, volume = {4}, number = {15}, pages = {1081-1086}, year = {2015}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2015.4.15.6}, abstract = {In this research, aluminum-tungsten carbide metal-base composites were fabricated by microwaveand conventional sintering methods and compared. Three-point bending strength specimenswere prepared with uniaxial press at 250 MPa and then were sintered in graphite bed at650 °C and 750 °C in microwave and conventional furnaces for 1 minute and 1hour, respectively.Density and mechanical properties (bending and compressive strength and microhardness)of samples were calculated. The highest bending strength of conventional and microwavesintered samples were 143 and 231 MPa at 750 °C, respectively. XRD patterns showed thedecomposition of WC particles and formation of Al5W interfacial reaction product phases inmicrowave heating method processes. SEM studies showed that WC reinforcement particleshad uniform distribution in Al matrix.}, keywords = {Aluminum matrix composite,Tungsten Carbide,Microwave sintering,Nanostructure}, title_fa = {مقایسه تأثیر روش های سینتر مایکروویو و کوره معمولی بر ریزساختار وخواص مکانیکی کامپوزیت زمینه فلزی آلومینیوم- کاربید تنگستن}, abstract_fa = {در این پژوهش، کامپوزیت های آلومینیوم/کاربید تنگستن به دو روش امواج مایکروویو وحرار تدهی در کوره معمولی تهیه شد. برای تهیه نمون ههای استحکام خمشی سه نقطه ای،کامپوزی تها تحت فشار250مگاپاسکال توسط پرس تک محور شک لدهی شده و سپس دربستر گرافیت در دماهای650و750درجه سانتیگراد در کوره مایکروویو به مدت یک دقیقه ودر کوره معمولی به مدت یک ساعت تف جوشی شدند. به منظور بررسی خواص نمونه هایتهیه شده، چگالی نمونه ها سنجیده و استحکام خمشی و فشاری و سختی نمونه ها اندازه گیری شد.بیشترین میزان استحکام خمشی در دمای تف جوشی750درجه سانتیگراد در کوره معمولی و مایکروویو به ترتیب به میزان143و231 مگاپاسکال حاصل شد. همچنین به منظور بررسی ریزساختار و آنالیز فازی، الگوی پراش پرتو ایکس و تصاویرمیکروسکوپ الکترونی روبشی نمونه ها مورد بررسی قرار گرفت که نتایج نشان دهنده تجزیه کاربید تنگستن در دمای 650درجه سانتیگراد در کوره مایکروویو و تشکیل فاز های Al5Wبود.بررسی ریزساختار نیز توزیع همگن و یکنواخت ذرات تقویت کننده در زمینه را نشان داد.}, keywords_fa = {کامپوزیت های زمینه آلومینیوم,کاربید تنگستن,تف جوشی,مایکروویو,نانوساختار}, url = {https://amnc.aut.ac.ir/article_68732.html}, eprint = {} }