@article { author = {Moghadas, Shahab and Maghsoodipoor, Amir and Ebadzade, Touraj}, title = {Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {19}, pages = {1347-1352}, year = {2017}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.19.2}, abstract = {In this research, BaFe0.8Cu0.1Ni0.1O3-δ powder microwave-assisted solid state reaction synthesized and then sintered at microwave furnace. For characterization of synthetic powders, X-ray diffraction (XRD), scanning electron microscopy (SEM), and powder density using gas pycnometer method and for sintered samples, density and open porosity percentage, scanning electron microscopy and Energy Dispersive Spectroscopy (EDS) were performed. The results showed that powder was synthesized by microwaveassisted solid state reaction at 1000oC without soaking time and the obtained powder had tetragonal structure and mono-phase and its density was 5.43g/cm3. Furthermore, as the temperature of sintering samples in microwave was increasing, the percentage of open porosity increased and the percentage of relative density decreased. Scanning electron microscope images demonstrated variety diameters of needles which their composition were comparable to their section of samples according to Energy Dispersive Spectroscopy (EDS) analysis.}, keywords = {Sintering,Microwave,Solid State Reaction}, title_fa = {سینترینگ ترکیب∂-BaFe0.8Cu0.1Ni0.1O3 به کمک مایکروویو جهت کاربرد در کاتد پیل سوختی اکسید جامد}, abstract_fa = {در این پژوهش، پودر∂-BaFe0.8Cu0.1Ni0.1O3 به کمک مایکروویو و به روش واکنش حالت جامد سنتز و سپس در کوره مایکروویو سینتر گردید. برای مشخصه یابی پودرهای سنتزی، آنالیز پراش اشعه ایکس چگالی پودر به روش پیکنومتری گازی و میکروسکوپ الکترونی روبشیو برای نمونه های سینتر شده چگالی و درصد تخلخل باز، میکروسکوپ الکترونی روبشی و طیف سنجی تفکیک انرژی انجام گرفت. نتایج حاصل نشان داد که پودر به روش واکنش حالت جامد و با کمک مایکروویو در دمای 100 درجه بدون زمان ماندگاری سنتز می گردد و ساختار حاصل به صورت تک فاز و تتراگونال می باشد که چگالی آن 0.43 g/cm3 است. همچنین، در نمونه های سینترشده با افزایش دما، درصد تخلخل باز افزایش و درصد چگالی نسبی کاهش می یابد. تصاویر میکروسکوپ الکترونی روبشی سوزن هایی با قطرهای مختلف را نشان می دهند که با توجه به آزمون طیف-سنجی تفکیک انرژی، این سوزن ها دارای ترکیب مختلفی نسبت به بقیه قسمت های نمونه نیستند.}, keywords_fa = {سینترینگ,مایکروویو,واکنش حالت جامد}, url = {https://amnc.aut.ac.ir/article_68748.html}, eprint = {https://amnc.aut.ac.ir/article_68748_26b47ca25bf8a94e54870640ed30cf45.pdf} }