@article { author = {شجاعی اوغاز, رضا and فرح بخش, ایمان}, title = {Investigation of mechanical surface coatings by nickel, copper and silica nanoparticles on internal walls of low diameter pipes}, journal = {Advanced Materials and New Coatings}, volume = {5}, number = {18}, pages = {1259-1266}, year = {2016}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {AMNC.2017.5.18.1}, abstract = {One of the big challenge in the oil, gas, petrochemical industries is equipment wearing. Tackling this process ,a new coating process using mechanical milling, have been proposed.This study has been done in a method of mechanical alloying in order to build a coating using copper , nickle powders and silica nonoparticles, on the steel plat form , at theroom , tempeerature and under the enviranment space with the use of grinder bullets for different periods of time (1,3,5,10,20 and 30 hours) for the samples of series 1 (30%containing  copper) and samples of series 2 (30% containing nickle).The mutual diffusion of the elements during milling which led to the formation of a Ni–Cu solid solution and the creation of Ni–Cu coating on the surface of samples was studied.Micro-structural characterization of the coating surface using optical microscope, electron rubshi microscope (FESEM), spectroscopy of X.ray with the scattered energy and analysing the roughness and abrasion of the surface were studied. ,the thickness of coating layer is formed on the series 1(30%copper) is more than series 2(30%nickel)and at the long time periods of milling X-ray diffraction (XRD) results revealed the formation of nanocrystalline solid solutions.}, keywords = {mechanical alloying,nanoparticles SiO2,Ni–Cu solid solution,Microstructure,Nanostructures,High-energy milling}, title_fa = {بررسی پوشش دهی مکانیکی سطح توسط مخلوط نیکل، مس و نانو ذرات سیلیس بر روی جداره داخلی لوله های با قطر کم}, abstract_fa = {یکی از چالش های بزرگ در صنعت نفت، گاز وپتروشیمی، ساییدگی تجهیزات و جداره داخلی لوله های با قطر کم می باشد. در این تحقیق به منظور بررسی بهبود خواص مکانیکی از فرایند پوشش دهی مکانیکی سطح (30%) با استفاده از فرآیند آسیاکاری مکانیکی استفاده گردید. جهت ساخت پوشش از پودرهای مس، نیکل و نانو ذرات سیلیس، بر روی بستر فولادی، در دمای اتاق وتحت اتمسفر محیط، در زمان های مختلف آسیا استفاده گردید. ترکیب شیمیایی مخلوط پودر مصرفی در غالب نمونه های سری 1 (30% مس) ونمونه های سری2 (30% نیکل) نظر گرفته شد. نفوذ دو جانبه ی عناصر نیکل و مس در طول آسیاکاری منجر به ایجاد پوشش لایه ای و تشکیل محلول جامدNi-Cu بر سطح نمونه ها می شود. بررسی مشخصات میکرو ساختاری سطح پوشش با استفاده از آنالیزهای متعدد از جمله: میکروسکوپ الکترونی روبشی FE-SEM ، طیف سنجی اشعه ایکس با انرژی پراکنده EDSو آنالیز زبری سطح و سایش نشان داد که با استفاده از روش و شرایط عملیاتی مناسب، ضخامت لایه پوشش تشکیل شده در سری 1 بیشتر از سری 2 می باشد. نتایج پراش اشعه یX تشکیل نانو کریستال های محلول های جامد را اثبات نمود. تاثیر افزودن نانوذرات SiO2 به مخلوط پودر باعث بهبود خواص مکانیکی گردید. نتایج تست سایش حکاکی از بهبود مقاومت به سایش در اثر تشکیل این پوشش می باشد.    }, keywords_fa = {پوشش دهی مکانیکی سطح ( SMC ),نانو ذرات سیلیس,محلول جامد نانو ساختار Ni-Cu,زمان آسیاکاری}, url = {https://amnc.aut.ac.ir/article_68789.html}, eprint = {https://amnc.aut.ac.ir/article_68789_a833c02fff54fafacb1ac44e095286eb.pdf} }