@article { author = {Nouri, Masoud and Bijani, Milad and Sarabi, Ali Asghar and Eivaz Mohammadloo, Hossein}, title = {Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel}, journal = {Advanced Materials and New Coatings}, volume = {4}, number = {14}, pages = {965-974}, year = {2014}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2015.4.14.1}, abstract = {In this search, conversion coating was applied on cold rolled steel try immersing specimens in a solution including La(NO3)3, and the effect of immersion time has been investigated. Electrochemical properties of the formed oxide layer were assessed Electrochemical Impedance Spectroscopy (EIS) and DC Polarization measurements. The morphology of the surface of wild rolled steel treated by conversion coating at different immersion times was studied by Field Emission Scanning Electron Microscopy (FE-SIM). The EIS and SEM results showed that better corrosion resistance (2.5 kΩ.cm2) along with a more uniform surface profile was achieved after 5 min immersion in the conversion coating bath. On the other hand, the coatings, which were formed by immersion in the rare-earth salt containing solution, significantly reduced the dissolution of La oxides and deteriorated the substrate after 50 min. Adhesion of epoxy organic coating to the untreated and La conversion-coated CRS was evaluated try pull-off method and results revealed the positive performance of La conversion coating.}, keywords = {Conversion coating,Lanthanum Nitrate,polarization,Electrochemical Impedance Spectroscopy (EIS),Field Emission Scanning Electron Microscopy (FE-SEM)}, title_fa = {ارزیابی رفتار الکتروشیمیایی و ریخت شناسی پوشش تبدیلی بر پایه لانتانیم بر روی فولاد نورد سرد}, abstract_fa = {در این پژوهش، رفتار الکتروشیمیایی و ریخت شناسی پوشش تبدیلی بر پایه فلز کمیاب خاکی لانتانیم، با غوطه وری نمونه های فولاد نورد سرد در محلول لانتانیم نیترات و اعمال آن بر زیر آیند، بررسی شد و اثر زمان غوطه وری در محلول پوشش تبدیلی مورد ارزیابی قرارگرفت. مقاومت به خوردگی لایه اکسید تشکیل شده بر زیر ایند فولادی به کمک آزمون های قطبش و طیف سنجی امپدانس الکتروشیمیایی مورد مطالعه قرار گرفت. ریخت شناسی سطح پوشش تبدیلی توسط میکروسکوپ الکترونی روبشی گسیل میدانی ارزیابی شد. نتایج آزمون ها نشان داد که نمونه پوشش شده با زمان غوطه وری ۵دقیقه، مقاومت خوردگی بالاتر   (( 2/5 KΩ. Cm2و سطح یکنواخت تری را در مقایسه با دیگر نمونه ها دارد. همچنین، با افزایش زمان غوطه وری تا ۵۰ دقیقه مقاومت به خوردگی کاهش می یابد و پوشش تبدیلی تشکیل شده در محلول پوشش تبدیلی حل می شود و یکنواختی سطح پوشش کاهش می یابد. چسبندگی پوشش الی بر پایه اپوکسی بر روی زمینه فولادی اصلاح نشده و اصلاح شده با پوشش تبدیلی لانتانیمی توسط آزمون Pull off بررسی شد و نتایج بیانگر عملکرد مؤثر پوشش تبدیلی در بهبود چسبندگی بود.}, keywords_fa = {پوشش تبدیلی,لانتانیم نیترات,قطبش,طیف سنجی امپدانس الکتروشیمیایی,میکروسکوپ الکترونی روبشی,گسیل میدانی}, url = {https://amnc.aut.ac.ir/article_69132.html}, eprint = {} }