@article { author = {Salimi, Sina and Zaarei, Davood and Fazaeli, Reza}, title = {Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy}, journal = {Advanced Materials and New Coatings}, volume = {4}, number = {14}, pages = {991-998}, year = {2014}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2015.4.14.4}, abstract = {Invar alloy (64% Fe & 36%Ni) has low coefficient of thermal expansion (CTE). Invar's CTE is the lowest of any metal. This alloy is Iron based, so it can be corroded and need protection from corrosive species. In this research, corrosion prevention of Invar by inorganic surface coatings was investigated. Protective influences of electroless nickel plating, electroless nickel/ zinc plating double layer, and zinc rich ethyl silicate coatings were studied. Electrochemical polarization test and Tafel extrapolation were used to characterize the corrosion behavior of each specimen. Results showed that the corrosion current density (icorr) of bare Invar was about 4.08 Aµ/cm2 and the electroless nickel coating could not decrease icorr of Invar, suitably. In addition, the specimen with electroless nickel/zinc coating showed low icorr about 5.30*10-2 Aµ/ cm2. Also, with zinc rich ethyl silicate, the corrosion protection mechanism was cathodic and after 20 days, it changed to barrier mechanism with icorr about 6.71x10-2Aµ/cm2 in icorrin 3.5% wt sodium chloride solution.}, keywords = {Invar,corrosion,Polarization Test,Zinc rich ethyl silicate}, title_fa = {بررسی تاثیر پوشش های معدنی بر مقاومت خوردگی آلیاژ اینوار}, abstract_fa = {آلیاژ پیشرفته اینوار با ٪۶۴ آهن و ۳۶ نیکل کمترین ضریب انبساط حرارتی را در بین فلزات  داراست. این فلز دارای پایه آهنی بوده و مستعد خوردگی در محیط های مختلف است. در این تحقیق ، تأثیر سه نوع پوشش معلنی مشتمل بر نیکل غیر الکتریکی، دولایه نیکل غیر الکتریکی/روی و همچنین پوشرنگ اتیل سیلیکات غنی از روی بر کاهش چگالی جریان خوردگی اینوار بررسی شد. آزمون الکتروشیمیایی قطبش و برون یابی تافل به منظور سنجش و مقایسه رفتار خوردگی به کار رفت. نتایج به دست آمده مشخص نمود که چگالی جریان خوردگی اینوار تقریبا برابر با 4/08 Aµ/cm2است و پوشش نیکل غیر الکتریکی اعمالی بر سطح آن، کاهش قابل قبولی در چگالی جریان خوردگی به وجود نمی آورد. همچنین نمونه ی دارای پوشش دولایه نیکل غیر الکتریکی/روی چگالی جریان خوردگی پایین و کم تغییری در حدود 5/3 ×2-10 Aµ/cm2دارد، که نشان دهنده قابلیت حفاظتی آن است. به علاوه، پوشرنگ اتیل سیلیکات غنی از روی بر اینوار می تواند تا بیست روز در محلول 5/3% کلرید سدیم به صورت حفاظت کاتدی و پس از آن به شکل حفاظت سد کنندگی با کمینه چگالی خوردگی Aµ/cm210-2 ×  6/71 این آلیاژ را محافظت کند.}, keywords_fa = {اینوار,خوردگی,پوشش,آزمون قطبش,اتیل سیلیکات غنی از روی}, url = {https://amnc.aut.ac.ir/article_69136.html}, eprint = {} }