@article { author = {Moshayedi, Hamid Reza and Rabiee, Mohammad and rabiee, navid}, title = {Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases}, journal = {Advanced Materials and New Coatings}, volume = {7}, number = {25}, pages = {1799-1808}, year = {2019}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2018.7.25.5}, abstract = {In this study, a multi nano biosensor was developed for simultaneous detection of carbon dioxide, methane, ethanol and ammonia gas, and its electrochemical response to various concentrations of these gases was studied. In the previous study, GO/PANI nanocomposite was constructed and examined the chemical composition and morphology and its structure by analyzing FT-IR, FE-SEM, HR-TEM and XRD. In this study, we put nanocomposite on silver-coated new electrodes and then, by placing nanoparticles of aluminum oxide, zinc oxide, tin oxide and titanium oxide, different parts of the sensor were compared to Carbon dioxide, Methane, Ethanol and Ammonia are susceptible, then, the response rate and its sensitivity to each of the gases were measured by amprometric tests. The results showed that the sensitivity of the multi nano biosensor is acceptable for sensing these gases. The results of the electrochemical experiments showed that the response of each sensor component is defined as an illuminated 4 equation to a mixture of the four gas discussed. Considering the responses of the four components of this multi nano biosensor simultaneously to the 4-gas mixture, 4 equations are obtained, which can be ascertained by the exact concentration of each of the four measured gases.Of course, these equations are correct until none of the sensors are saturated and there is no other effective gas in the analyte.}, keywords = {Multi-Nanobiosensor,GO,graphene oxide,Poly Aniline,Gas Sensor}, title_fa = {طراحی و ساخت نانو حسگر زیستی چندگانه برای تشخیص همزمان گازهای دی اکسید کربن، متان، اتانول و آمونیاک}, abstract_fa = {در این مطالعه یک نانوحسگر زیستی چندگانه برای تشخیص همزمان گازهای دی اکسید کربن، متان، اتانول و آمونیاک ساخته شد و پاسخ الکتروشیمیایی آن به غلظتهای مختلف این گازها مورد بررسی قرار گرفت. برای ساخت آن از نانوکامپوزیت گرافن اکساید/پلی آنیلینی که در تحقیق قبل ساخته بودیم و ترکیب شیمیایی و ریخت شناسی و ساختار آن را با آنالیز های FT-IR، FE-SEM، HR-TEM و XRD مورد بررسی قرارداده بودیم بهره جستیم. در این تحقیق نانو کامپوزیت تشکیل شده را بر روی الکترودهای جدیدی با روکش نقره قرار داده و سپس با قرار دادن نانو ذرات اکسید آلومینیوم، اکسید روی، اکسید قلع و اکسید تیتانیوم قسمت های مختلف نانوحسگر زیستی چندگانه به ترتیب نسبت به گازهای دی اکسید کربن، متان، اتانول و آمونیاک حساس شد و میزان پاسخ و حساسیت آن نسبت به هریک از گازها با انجام آزمایش های آمپرومتریک مورد سنجش قرار گرفت و نتایج نشان داد که حساسیت حسگرهای ساخته شده برای تشخیص گازهای فوق قابل قبول می باشد. بررسی نتایج حاصل از انجام آزمایش های الکتروشیمیایی نشان داد که پاسخ هر جز نانوحسگر زیستی چندگانه نسبت به مخلوطی از 4 گاز مورد بحث به صورت یک معادله 4 مجهولی تعریف میشود و با در نظر گرفتن پاسخ های 4 جزء این حسگر چندگانه به صورت همزمان نسبت به مخلوط 4 گاز مورد سنجش، 4 معادله 4 مجهولی حاصل میشود که با حل آن میتوان به غلظت دقیق هریک از 4 گاز مورد سنجش پی برد.}, keywords_fa = {حسگر زیستی چندگانه,اکسید گرافن,پلی آنیلین,حسگر گاز}, url = {https://amnc.aut.ac.ir/article_83504.html}, eprint = {https://amnc.aut.ac.ir/article_83504_2b335727fbd9f9e410388586d235d3fb.pdf} }