@article { author = {Setare, Elham and Alizadeh, Mehdi and Edris, Hossein}, title = {Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel}, journal = {Advanced Materials and New Coatings}, volume = {7}, number = {27}, pages = {1909-1915}, year = {2019}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2019.7.27.3}, abstract = {HH grade heat resistant steels are widely used in various industries due to their high temperature strength, excellent oxidation and corrosion resistance. The major degradation of these steels is due to oxidation at high temperatures. The use of diffusion barrier coating can increase the life of these steels. One of the preferred coatings is NiAl, an intermetallic compound with high oxidation resistance. In this research, the effect of Cr2O3 and TiO2 additives on the high temperature oxidation resistance of high velocity oxygen fuel (HVOF) sprayed NiAl coating was studied. At First, the NiAl powder mechanical alloying synthesis conditions were determined using Ni and Al powders. Then, each of the Cr2O3 and TiO2 powders were separately added to the NiAl mixture 5% by weight. The powder sprayed on the surface of HH steel by HVOF method. samples, SEM scanning electron microscope, hardness test, high temperature oxidation test, and thickness test were used to investigate and evaluate the quality of coated. The results showed that the composite coated steel had less porosity and had a thicker and harder surface than NiAl coating. Thermal shock resistance of samples with composite coating is much higher than that of the NiAl coating, and the maximum oxidation resistance at 1200 ° C belongs to the NiAl-TiO2 coating sample}, keywords = {NiAL,HVOF,Oxidation Resistance,coating}, title_fa = {نقش پوشش کامپوزیتی NiAl-(Cr2O3, TiO2) بر مقاومت به اکسیداسیون فولاد مقاوم به حرارت HH}, abstract_fa = {فولادهای مقاوم به حرارت نوع HH به دلیل برخورداری از استحکام در دمای بالا و داشتن مقاومت به خوردگی و اکسیداسیون مناسب، کاربرد نسبتاً گسترده‌ای در صنایع مختلف دارند. عمده تخریب و استهلاک این فولادها ناشی از اکسیداسیون در دمای بالا می‌باشد. استفاده از پوشش سد نفوذی می‌تواند عمر کاری این فولادها را افزایش دهد. یکی از پوشش‌های مورد نظر، NiAl می‌باشد که یک ترکیب بین فلزی با مقاومت به اکسیداسیون بالاست.در این پژوهش تاثیر افزودن TiO2 و Cr2O3 بر مقاومت به اکسیداسیون در دمای بالای پوشش NiAL اعمال شده به روش HVOF بررسی شد. ابتدا شرایط سنتز پودر NiAl به روش آسیا کاری مکانیکی با استفاده از پودرهای Ni و Al تعیین شده است. سپس هر کدام از پودرهای TiO2 و Cr2O3 بطور جداگانه به مقدار 5 درصد وزنی به ترکیب NiAl اضافه و مخلوط شدند. پودرهای حاصله به روش HVOF بر سطح زیر لایه فولاد HH اسپری شده است. به منظور بررسی و ارزیابی کیفی نمونه های پوشش داده شده از میکروسکوپ الکترونی روبشی SEM، آزمون سختی سنجی، آزمون اکسیداسیون در دمای بالا و آزمون ضخامت سنجی بهره گرفته شده است. نتایج نشان داد که فولاد با پوشش کامپوزیتی از تخلخل کمتر و ضخامت و سختی بیشتری نسبت به نمونه با پوشش NiAl برخوردار بوده است. همچنین مقاومت به شوک حرارتی نمونه های با پوشش کامپوزیتی به مراتب بیشتر از نمونه با پوشش NiAl بوده است و حداکثر مقاومت به اکسیداسیون در دمای 1200 درجه سانتی‌گراد،متعلق به نمونه با پوشش NiAl-TiO2 می‌باشد.}, keywords_fa = {NiAL,HVOF,مقاومت به اکسیداسیون,پوشش}, url = {https://amnc.aut.ac.ir/article_85879.html}, eprint = {https://amnc.aut.ac.ir/article_85879_cb1b58b8faaa340d82fe96d64c5abfbd.pdf} }