@article { author = {Adhamijamali, Arash and Towfighi Darian, Jafar and Kazemzadeh, Hamid}, title = {Facilitated Transport for Water Treatment through a CA-based Polymer Inclusion Membrane: Synthesis & Optimization}, journal = {Advanced Materials and New Coatings}, volume = {6}, number = {24}, pages = {1727-1732}, year = {2018}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/AMNC.2018.6.24.3}, abstract = {The state-of-the-art polymer inclusion membranes (PIMs) have risen attentions for their desirable stability and flux for ion separation. PIM ingredients are crown ether as a carrier, ionic liquid as a plasticizer, CA as a base polymer, and, in this work, MOF. Various amounts of constituting components will affect the resulted membrane performance in terms of flux. In this regard, the ingredients contents are required to be optimized. To do so, a well-suited design of the experiment is capable of estimating the optimal composition of the prepared PIM. In the current study, response surface methodology was used to optimize flux using the optimum amounts of the ingredients of the final membrane. Using this technique, the effects of the main ingredients and their interactions were investigated. In this work, attempts have been made to evaluate the flux using response surface methodology. Being a strong and widespread RSM approach, a central composite design (CCD) was used to do so. To study the MOFs structures, XRD analysis was used. FTIR analysis was exploited to investigate the membrane structure.}, keywords = {"Optimization","PIM","Crown Ether","MOF","Response Surface Methodology"}, title_fa = {انتقال تسهیل شده در تصفیه آب با استفاده از غشای مایع پایه پلیمری سلولز استات: تهیه و بهینه سازی}, abstract_fa = {جدیدترین تکنولوژی PIM بعلت پایداری و شار مطلوب برای جداسازی یون‌ها، توجه بسیاری را برانگیخته‌اند. اجزای تشکیل دهنده PIM مورد استفاده در این مطالعه، اتر تاجی به عنوان حامل، مایع یونی به عنوان پلاستی‌سایزر و CA به عنوان پلیمر پایه بوده‌اند. همچنین در این کار از MOF هم در ساختار غشا استفاده شد. مقادیر متفاوت اجزای تشکیل دهنده بر عملکرد غشای نهایی بر اساس شار تاثیر‌گذار خواهند‌ بود. به همین منظور لازم است اجزای بکار برده شده در داخل غشا به میزان بهینه خود انتخاب شوند. برای انجام این کار با استفاده از طراحی آزمایش، ترکیب درصد اجزای PIM نهایی تخمین زده شد. در این پژوهش روش سطح پاسخ برای بهینه‌سازی شار با استفاده از مقادیر بهینه اجزای تشکیل دهنده‌ی غشای نهایی مورد استفاده قرار گرفت. با استفاده از این تکنیک تاثیر اجزای تشکیل دهنده‌ی اصلی و برهمکنش‌های بین آنها مورد بررسی قرار گرفتند. در این مطالعه تلاش‌هایی برای ارزیابی شار با استفاده از روش سطح پاسخ صورت پذیرفت. به عنوان یک روش قوی و فراگیر از RSM، روش طراحی مرکب مرکزی بدین منظور مورد استفاده قرار گرفت. آنالیز XRD برای تعیین ساختار نانوذرات و آنالیز FTIR به منظور بررسی ساختار غشا استفاده شد.}, keywords_fa = {"بهینه‌سازی","PIM","اتر تاجی","روش سطح پاسخ","چارچوب فلزی-آلی"}, url = {https://amnc.aut.ac.ir/article_88928.html}, eprint = {https://amnc.aut.ac.ir/article_88928_3fa54fb31dfcb3e4bb0962397240babe.pdf} }