@article { author = {hashemi, seyed masoud and Maleki, Ali}, title = {Study of resistance of applied mineral resin coating for stabilization of nanoparticles TiO2 to remove organic pollutants from waste water of paint and coating industries}, journal = {Advanced Materials and New Coatings}, volume = {6}, number = {24}, pages = {1741-1746}, year = {2018}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/AMNC.2018.6.24.5}, abstract = {In this research, resistance of mineral resin coating has been reviewed in order to stabilize nanoparticles of TiO2 to remove organic pollutants. For this purpose, mineral base resin was covered on glass walls of reactor first, and then resin surface preparation was done to be coated (stabilization) with nanoparticles of TiO2 by an appropriate solvent. In this study, different solvents were used for preparing the resin. In addition, residence time of solvents for surface preparation of polymer (resin) was investigated. Applying solvent is the most effective, quickest, and cost effective methods to prepare resin surfaces because there is no need to temperature operation and special equipment. In this process, the optimum contact time between solvent and mineral base resin was evaluated 20 min for surface preparation stage. Considering the results of the surface preparation process and different tests, such as water resistance, DSC of the applied coatings, it can be presumed that the prepared surface of resin shows suitable resistance against the different factors. In this research, the use of resin as the glue to maintain and stabilize the nanoparticles TiO2 would prevent the catalyst loss and reduce the cast of waste water treatment greatly.}, keywords = {Coatings resistance,coating,nanoparticles TiO2,Mineral resin,surface preparation}, title_fa = {بررسی مقاومت پوشش‌های رزین پایه معدنی مورد استفاده بمنظور تثبیت نانوذرات دی‌اکسیدتیتانیوم جهت حذف آلاینده‌های آلی از پساب صنایع رنگ و پوشش}, abstract_fa = {در این تحقیق مقاومت پوشش‌های رزین معدنی بمنظور تثبیت نانوذرات دی‌اکسیدتیتانیوم جهت حذف آلاینده‌های آلی مورد بررسی قرار گرفته است. بدین منظور ابتدا رزین پایه معدنی بر روی صفحه شیشه‌ای رآکتور، پوشش داده شد، سپس عمل آماده‌سازی سطح رزین بوسیله یک حلال مناسب، به‌منظور پوشش‌دهی (تثبیت) نانوذرات دی‌اکسیدتیتانیوم صورت گرفت. در این تحقیق از حلال های مختلفی برای آماده سازی رزین استفاده شد. همچنین مدت زمان اقامت حلال ها جهت آماده‌سازی سطح پلیمر(رزین) مورد بررسی قرار گرفت. در آماده‌سازی سطح رزین استفاده از حلال یکی از موثرترین، سریع‌ترین و مقرون به‌صرفه‌ترین روش‌ها است، زیرا برای انجام عمل آماده‌سازی به دما، تجهیزات و دستگاه خاصی نیاز نیست. در این فرآیند زمان بهینه تماس میان حلال و سطح رزین پایه معدنی به‌منظور آماده‌سازی سطح 20 دقیقه ارزیابی شد. با توجه به نتایج حاصل از فرآیند آماده سازی سطح و آزمایشات مختلف همچون مقاومت در برابر آب، تست سختی سنج و DSC و تصاویر SEM بر روی پوشش های اعمال شده می توان چنین استنباط کرد که سطح رزین آماده سازی شده در برابر عوامل مورد آزمایش مقاومت خوبی را از خود نشان می دهد. برای بررسی تأثیر رنگبری و معدنی شدن رنگزا توسط نانوذرات TiO2 پوشش داده شده بر روی رزین، محلول رنگزا را داخل رآکتور تصفیه پساب ریخته و عمل رنگبری در مدت زمانهای 30، 45، 60 و 90 دقیقه صورت می پذیرد، در این زمان ها از محلول نمونه گیری کرده و توسط دستگاه UV/Vis طیف جذبی این نمونه ها گرفته می شود.}, keywords_fa = {مقاومت پوشش ها,پوشش دهی,نانوذرات دی اکسیدتیتانیوم,رزین معدنی,آماده سازی سطح}, url = {https://amnc.aut.ac.ir/article_88929.html}, eprint = {https://amnc.aut.ac.ir/article_88929_76642fc3ce1157f04433204b3c2ee3b5.pdf} }