@article { author = {Hosseinzadeh Yekani, Nima and Jahanshahi, Mohsen and Peyravi, Majid and Najafpour, Qasem}, title = {Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor}, journal = {Advanced Materials and New Coatings}, volume = {8}, number = {31}, pages = {2280-2287}, year = {2020}, publisher = {}, issn = {2322-1356}, eissn = {}, doi = {/amnc.2019.8.31.7}, abstract = {In this study, the combination of chemical, biological and membrane processes was investigated for landfill leachate treatment. In order to reduce the contamination level, the chemical coagulation process was used by coagulants such as aluminum sulfate and poly aluminum chloride. Also, the optimum pH range and concentration of the coagulant were determine following by the biological process of activated sludge. Finally, the leachate separation of the aerobic bioreactor was carried out by FO-MBR membrane process and the effect of powder activated carbon adsorbent was studied on this process. The results showed that the amount of COD in leachate decreased by 48% after pretreatment using coagulants (optimum concentration of 1 g / l and pH = 8). Then, the COD removal rate reached to 24% by using the aerobic activated sludge process under optimum aeration conditions, F / M = 0.312 COD / MLSS.d ratio and 24h hydraulic retention time. In the last section, the usage of synthesized cellulose membrane in form of the frame and plate modules immersed in the aerobic bioreactor of the FO-MBR process, was examined. Furthermore, 2 g / l powder activated carbon adsorbent was used to improve the performance of this process and the reduction of membrane fouling, which improved the performance of the landfill leachate wastewater treatment system by increasing the COD removal rate from 74% to 92% as well as the changes in MLSS concentration during the 4-day FO-MBR process increased by 24% compared to the absence of adsorbent.}, keywords = {: Landfill leachate,Coagulation,Activated sludge,COD removal}, title_fa = {تصفیه شیرابه زباله با استفاده از غشای نانو ساختار پلیمری در فرآیند اسمز مستقیم بیوراکتور جذبی-غشایی}, abstract_fa = {شیرابه زباله نوعی فاضلاب قوی است که آلودگی ناشی از آن در سراسر جهان به عنوان یکی از مهم ترین معضلات زیست محیطی مطرح است. در این پژوهش ابتدا به منظور کاهش بار آلی شیرابه از فرآیند انعقاد شیمیایی به‌وسیله مواد منعقد‌کننده از جمله سولفات آلومینیوم و پلی‌آلومینیوم کلراید استفاده شد و محدوده بهینه pH و غلظت بهینه ماده منعقد‌کننده بررسی شد. سپس برای تصفیه شیرابه زباله از فرآیند بیولوژیکی لجن‌فعال استفاده شد و در پایان برای جداسازی شیرابه تصفیه شده از بیوراکتور هوازی از فرایند غشایی FO-MBR استفاده شد و همچنین تأثیر جاذب کربن‌فعال در این فرایند مورد بررسی قرار گرفت. بر اساس نتایج به‌دست آمده، با استفاده از مواد منعقدکننده( غلظت بهینه g/l 1 و 8=pH) میزان COD شیرابه بعد از فرایند پیش تصفیه %48 کاهش یافت. سپس با استفاده از فرایند هوازی لجن‌فعال تحت شرایط بهینه هوادهی و نسبت "gCOD" ⁄"MLSS.d" 312/0=F/M و زمان ماند هیدرولیکی 24 ساعت میزان حذف COD به %5/28 رسید. در بخش آخر با استفاده از غشای سنتز شده سلولزی در غالب ماژول قاب و صفحه و به صورت مستغرق‌ در درون بیوراکتور هوازی فرایند FO-MBR مورد بررسی قرار گرفت. همچنین به منظور بهبود عملکرد این فرایند از جاذب کربن‌فعال با غلظت g/l 2 استفاده شد که این امر موجب بهبود عملکرد سیستم تصفیه شیرابه زباله گردید به گونه‌ای که میزان حذف COD از %74 به %89 افزایش یافت و همچنین میزان تغیرات غلظت MLSS در طول فرایند 4 روزه FO-MBR در مقایسه با حالت عدم وجود جاذب %24 افزایش داشت.}, keywords_fa = {شیرابه زباله,فرآیند انعقاد,لجن‌فعال,غشای سلولزی,حذف COD}, url = {https://amnc.aut.ac.ir/article_97256.html}, eprint = {https://amnc.aut.ac.ir/article_97256_ac1198c5a23432202f6d85df3f0744bf.pdf} }