انجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Synthesis of hydrogel nanocomposite based on graft copolymer of chitosan / itaconic acid and metal nanoparticlesسنتز نانوکامپوزیت هیدروژلی بر پایه کوپلیمر پیوندی کیتوسان / ایتاکونیک اسید و نانو ذرات فلزی27722779146101amnc.2021.10.38.1FAساسان دنکارشناس ارشد، گروه مهندسی شیمی، دانشکده فنی و مهندسی، دانشگاه شهید باهنر، کرمان، ایرانمریم کلانتری پوراستادیار، گروه شیمی، دانشکده علوم، دانشگاه شهید باهنر، کرمان، ایران0000-0002-7938-243XJournal Article20210710In this study, a hydrogel based on graft copolymer of itaconic acid (IA) onto chitosan (CS) was synthesized. For this purpose, the reaction was performed in nitrogen atmosphere and ammonium persulfate (APS) was used as an initiator and N,N-methylene bisacrylamide (MBA) as a crosslinking agent. In order to improve the water absorption, the effect of silver, silicon, and titanium oxide nanoparticles on hydrogel swelling was studied. Fourier transform infrared (FTIR) spectroscopy was used to confirm the structure and field emission scanning electron microscope (FESEM) used to study the morphology of the compounds. The presence of nanoparticles in the synthesized nanocomposites was confirmed by EDAX analysis. The results of water absorption showed that the synthesized hydrogel with 0.4 g MBA has the highest water absorption (19.7 g / g) and the presence of nanoparticles in the hydrogel structure increases the water absorption and SiO2 has the greatest effect so that the water absorption of nanocomposites containing silicon, titanium oxide and silver was obtained as 29.18, 26.92 and 23.47 g/g, respectively.در این پژوهش هیدروژل بر پایه کوپلیمر پیوندی ایتاکونیک اسید بر روی کیتوسان سنتز شد. برای این منظور واکنش در محیط گاز ازت انجام شد و آمونیوم پرسولفات بهعنوان آغازگر و N و N - متیلن بیس آکریل آمید بهعنوان عامل اتصال عرضی مورداستفاده قرار گرفتند. در ادامه بهمنظور بهبود میزان جذب آب اثر نانو ذرات نقره، تیتانیوم اکسید سیلیسیوم اکسید موردمطالعه قرار گرفت. از آنالیزهای طیفسنجی مادونقرمز تبدیل فوریه (FTIR) جهت تأیید ساختار و میکروسکوپ الکترونی روبشی گسیل میدانی (FESEM) بهمنظور بررسی مورفولوژی ترکیبات استفاده شد. حضور نانو ذرات در نانوکامپوزیت های سنتز شده توسط آزمون EDAX تأیید شد. نتایج بررسی میزان جذب آب نشان داد که هیدروژل سنتز شده با 4/0 گرم MBA بالاترین میزان جذب آب را دارد (19.7 گرم بر گرم) و استفاده از نانو ذرات در ساختار هیدروژل باعث افزایش میزان جذب آب میشود و بیشترین میزان اثر را نانوذره سیلیسیوم دارد بهطوریکه میزان جذب آب نانوکامپوزیت های حاوی سیلیسیوم، تیتانیوم و نقره به ترتیب برابر 29.18، 26.92 و 23.47 گرم برگرم به دست آمد.https://amnc.aut.ac.ir/article_146101_cb45931a2722555cbff5cb351ad903a1.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelinesبهبود خواص آبگریزی و سایش مکانیکی پوشش پلی یورتان تقویت شده با هیبرید نانولوله کربنی اصلاح شده با نانوسیلیکا جهت کاربری در خط لوله انتقال گاز27802791146136amnc.2021.10.38.2FAعلیرضا بهرامیاندانشیار، گروه مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه صنعتی همدان، همدان، ایرانوحید حمیدی پسندکارشناس اجرای طرح های شبکه، شرکت گاز استان همدان، همدان، ایرانرضا مظاهریکارشناس پژوهشی، شرکت گاز استان همدان، همدان، ایرانJournal Article20210724Abstract: Polyurethane mastic coating (PU) according to IGS-M-TP-020-2 standard of Iran Gas Company is used as one of the insulation methods for pipes and fittings along with other insulation methods. In this study, hybrid nanocomposite coatings were prepared by mixing PU with 0.3 wt% by weight of multi-walled carbon nanotubes modified with different weight percentages of nanosilica in the thickness range of 1500-1000 μm. Characteristic tests were performed for coating application in gas transmission pipelines and the results were compared with pure PU sample. According to the analysis of transmission electron microscopy, the optimal amount of 1% by weight of nanosilica led to the proper dispersion of nanoparticles within the polymer structure. The high resistance of nanocomposite coating against moisture penetration and its hydrophobicity was justified by reducing the glide angle to 17o and increasing the sphericity of water droplets on the coating surface. Less than 100 mg of mass loss due to mechanical abrasion and a slight decrease in the adhesion of the coating on the steel surface (less than 15%) and the elongation (%) under standard tension in the range of 10-15% compared to pure PU coating, justifies its use as a new coating to increase the life of steel gas pipes. The results of this research regarding the mentioned tests indicate the observance of the technical standards of Iran Gas Company by the proposed coverage. Investigation of other technical requirements of the coating is essential in research futures.پوشش ماستیکی پلی یورتان (PU) طبق استاندارد IGS-M-TP-020-2 شرکت گاز ایران بعنوان یکی از روشهای عایقکاری لولهها و اتصالات در کنار سایر روشهای عایقکاری بکار میرود. در این پژوهش پوششهای نانوکامپوزیت هیبریدی حاصل از اختلاطPU با 3/0 درصد وزنی نانولوله کربنی چند دیواره اصلاح شده با درصدهای وزنی مختلف نانوسیلیکا در بازه ضخامتی μm1500-1000 تهیه شدند. مطابق آنالیز میکروسکوپ الکترونی عبوری مقدار بهینه یک درصد وزنی نانوسیلیکا منجر به پراکندگی مناسب نانوذرات درون ساختار پلیمر شد. بالا بودن مقاومت پوشش نانوکامپوزیتی در برابر نفوذ رطوبت و ایجاد خاصیت آبگریزی آن با کاهش زاویهی سرش به 17 درجه و افزایش میزان کرویت قطرات آب روی سطح پوشش توجیه شد. مقادیر کمتر از 100 میلی گرم جرم اتلافی ناشی از سایش مکانیکی و افت ناچیز میزان چسبندگی پوشش روی سطح فولادی (کمتر از 15 درصد) و میزان ازدیاد طول تحت کشش استاندارد در بازه 15-10 درصد نسبت به پوشش PU خالص، استفاده از آن را بعنوان یک پوشش نوین جهت افزایش عمر لولههای فولادی گاز قابل توجیه میسازد. نتایج این تحقیق در خصوص آزمونهای یاد شده، حاکی از رعایت استانداردهای فنی شرکت گاز ایران توسط پوشش پیشنهادی است. بررسی سایر الزامات فنی پوشش نظیر میزان جدایش کاتدی و مقادیر چگالی شدت جریان مورد نیاز با توجه به عمر خط لوله، مقاومت در برابر ضربه حین قرارگیری در شرایط دمایی و محیطی مختلف و مطابقت با ایستگاههای حفاظت کاتدی مورد استفاده در صنعت گاز در پژوهشهای آتی امری ضروری است.https://amnc.aut.ac.ir/article_146136_2b8e2dfca41cf497ecfa337b573507af.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steelبررسی تاثیر دمای لایه نشانی روش اسپری پایرولیز روی پوششهای فوق آبگریزی نانو ذرات آلومینا اصلاح شده با استئاریک اسید بر روی فولاد زنگ نزن27922804146194amnc.2021.10.38.3FAزهرا احمدی زادگاندانشجوی کارشناسی ارشد، گروه شیمی، دانشگاه پیام نور، قم، ایرانحمید دانشمندکارشناس ارشد، ارگان اصلی مواد، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی، تهران، ایرانمسعود عراقچیاستاد، ارگان اصلی مواد، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی، تهران، ایرانJournal Article20210527Superhydrophobicity is the tendency of the surface to repel water droplets. Due to this unique property, superhydrophobic surfaces can be used in many areas such as waterproof surfaces, anti-corrosion surfaces, antifreeze surfaces, and anti-corrosion surfaces. In the present study, the superhydrophobic surface was generated using the spray pyrolysis method. The precursor to the coating process was stearic acid-modified alumina nanoparticles dispersed in alcohol. Increasing the deposition temperature, especially after 250 oC, reduced the roughness and hydrophobicity of the samples. Examination of deposition time showed that there is an optimal time for coating. In addition to experimental studies, the electronic properties and the mechanism of stearic acid adsorption on alumina surfaces were investigated with density functional theory (DFT) and molecular dynamics (MD) simulations. The superhydrophobic surface on the stainless steel substrate was obtained using a stearic acid-modified alumina suspension in 2-propanol alcohol at a temperature of 100 oC and 90 s deposition time with a water contact angle of about 160 °.فوق آبگریزی، تمایل سطح برای دفع قطرات آب است. به دلیل این خاصیت منحصربهفرد، از سطوح فوق آبگریز میتوان در بسیاری از حوزهها مانند سطوح ضدآب، سطوح ضدمه، سطوح ضدیخ و سطوح ضدخوردگی استفاده کرد. در مطالعه حاضر، سطح فوق آبگریز با استفاده از روش اسپری پایرولیز تولید شد. پیش ماده فرآیند لایه نشانی، نانو ذرات آلومینا اصلاحشده با استئاریک اسید بود که در الکل پراکنده شد. افزایش دمای لایه نشانی بهخصوص از دمای oC 250 به بعد سبب کاهش زبری و آبگریزی نمونهها شد. بررسی زمان لایه نشانی نشان داد که زمان بهینهای برای لایه نشانی وجود دارد. علاوه بر بررسیهای تجربی، خواص الکترونیکی و مکانیسم جذب استئاریک اسید بر سطح آلومینا با شبیهسازیهای اتمی نظریه تابعی چگالی (DFT) و دینامیک مولکولی (MD) بررسی شد. سطح فوق آبگریز روی زیرلایه فولاد زنگ نزن با استفاده از سوسپانسیون آلومینای اصلاح شده توسط استئاریک اسید در الکل 2-پروپانول در دما oC100 و زمان s90 لایه نشانی با زاویه تماس با آب حدود 160 درجه به دست آمد.https://amnc.aut.ac.ir/article_146194_1416369440809c002ca7bdf06bcdf8a8.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibersساخت و مشخصهیابی زخم پوش منعقدکننده خون مبتنی بر نانوالیاف کامپوزیتی کیتوسان/تانیک اسید/چارچوب ایمیدازولات زئولیتی (ZIF-8)28062815148038/amnc.2021.10.38.4FAالناز لامعیکارشناسی ارشد، دانشکده مهندسی نساجی، دانشگاه یزد، یزد، ایرانمهدی حسن زادهاستادیار، دانشکده مهندسی نساجی، دانشگاه یزد، یزد، ایران0000-0003-4951-8348Journal Article20211021In this study, chitosan composite nanofibers containing tannic acid and zinc-based metal-organic framework (ZIF-8) were produced for application as a hemostatic wound dressing. First, metal-organic framework named zeolite imidazolate framework (ZIF-8) was synthesized and chitosan composite nanofibers containing tannic acid and ZIF-8 were fabricated through electrospinning. The effect of tannic acid and metal-organic framework on the morphology and hemostatic properties of chitosan nanofibers was studied. Scanning electron microscopy, X-ray diffraction and blood coagulation tests were utilized. The study of the morphology of nanofibrous wound dressings shows the fabrication of uniform and bead-free nanofibers with an average diameter of 120 to 150 nm. The addition of tannic acid, due to the formation of hydrogen bonds and increasing the viscosity of the polymer solution, increased the diameter of chitosan nanofibers. Prothrombin time (PT) and activated partial thromboplastin time (aPTT) tests, which check the performance of extrinsic and intrinsic pathway of blood coagulation, respectively, were used to evaluate the hemostatic activity of the fabricated wound dressings. The results show that the fabricated nanofibrous wound dressings significantly affect the extrinsic pathway of blood coagulation and factor VII, so that the blood coagulation time is reduced by 60% compared to the control sample. Due to the suitable structural and morphological properties of fabricated composite nanofibers, as well as their accelerated coagulation performance, they can be used as a suitable candidate in wound dressing applications.در این پژوهش نانوالیاف کامپوزیتی کیتوسان حاوی تانیک اسید و چارچوب آلی-فلزی بر پایه روی (ZIF-8) به منظور استفاده بعنوان زخمپوش منعقدکننده خون تولید شد. برای این منظور ابتدا چارچوب آلی-فلزی موسوم به چارچوب ایمیدازولات زئولیتی (ZIF-8) سنتز شد و در ادامه نانوالیاف کامپوزیتی کیتوسان حاوی تانیک اسید و ZIF-8 به کمک روش الکتروریسی تولید شدند. تأثیر حضور تانیک اسید و چارچوب آلی-فلزی بر مورفولوژی و خواص انعقادی نانوالیاف کیتوسان مورد مطالعه و بررسی قرار گرفت. برای این منظور از میکروسکوپ الکترونی روبشی، پراش اشعه ایکس و آزمون انعقادخون استفاده شد. مطالعه مورفولوژی زخمپوشهای نانولیفی نشاندهنده تولید نانوالیاف یکنواخت و عاری از دانهتسبیحی با متوسط اندازه قطر 120 تا 150 نانومتر میباشد. همچنین حضور تانیک اسید به دلیل برقراری پیوندهای هیدروژنی و افزایش ویسکوزیته محلول پلیمری، سبب افزایش قطر نانوالیاف کیتوسان گردید. به منظور بررسی فعالیت انعقادی زخمپوشهای تولید شده، از آزمونهای زمان پروترومبین (PT) و زمان نسبی ترومبوپلاستین فعال شده (aPTT)، که به ترتیب صحت عملکرد مسیر خارجی و مسیر داخلی انعقاد خون را بررسی میکنند، استفاده شد. نتایج بدست آمده حاکی از آن است که زخمپوش نانولیفی تولید شده بطور قابلتوجهی بر مسیرخارجی انعقاد خون و فاکتور VII تأثیرگذاز است، بطوریکه زمان انعقاد خون به میزان 60 درصد نسبت به نمونه شاهد کاهش یافته است. با توجه به خواص ساختاری و مورفولوژی مناسب و همچنین و عملکرد تسریع انعقاد خون نانوالیاف کامپوزیتی تولید شده، میتوان از آن بعنوان گزینه مناسب در کاربردهای زخمپوش استفاده کرد.https://amnc.aut.ac.ir/article_148038_a19e24c3d721e10d0d3e7ebffa4f9d03.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Investigation graft polymerization of cyclodextrin derivative on the surface of cellulose by applying plasma technicبررسی پیونددهی پلیمریزاسیونی مشتق سایکلودکسترین روی سطح سلولز با استفاده از روش پلاسما28162836148039/amnc.2021.10.38.5FAملیحه نازیاستادیار، پژوهشکده شیمی و پتروشیمی، پژوهشگاه استاندارد، کرج، ایرانرضا محمد علی مالکدانشیار، دانشکده مهندسی نساجی، دانشگاه صنعتی امیرکبیر، تهران، ایرانJournal Article20211115Cellulose finds applications in the various fields as composite materials, textiles, drug delivery systems and protective products; in addition, cyclodextrins as a compound to improve these applications, can form inclusion complexes but cannot form direct covalent bonds to the textile materials, so it is important to achieve appropriate methods to anchoring cyclodextrins based on grafting polymeric compounds on the surface modification of the cellulose. In this study, binding of a reactive β-cyclodextrin to cellulose was investigated using chemical, physical and instrumental methods and the mechanism of grafting of reactive cyclodextrin onto the surface of cellulosic fabric was studied. Intended for grafting this compound on the cotton fabric, plasma technique was used to activate the surface to generate free radicals on cellulosic chains. According to the results, the yields of grafting the reactive derivative of β-cyclodextrin onto the surface of cellulosic fabrics increased by applying copolymers of this derivative and an intermediate monomer. In addition, the impact of the graft polymerization of these vinyl monomers on the performance of cotton fabric was evaluated and the results showed that although activation of the surface is attributed to cellulose degradation, the graft copolymerization monomers could be responsible for the compensating increase in its tensile strength and crease recovery in the suitable conditions. Furthermore, investigation the performance of the fabric in different conditions of surface activation and grafting of monomers, increases possibility of explaining the proposed mechanisms.سلولز به عنوان مهمترین پلیمر طبیعی، کاربرد وسیعی را در زمینه مواد کامپوزیتی، نساجی، سیستمهای رهایش دارو و محصولهای محافظتی دارا است؛ از طرفی، بتاسایکلودکسترینها که به دلیل قابلیت تشکیل کمپلکسهای القایی، توسعه این کاربردها را افزایش میدهند، به طور مستقیم امکان اتصال دائمی به کالاهای نساجی را ندارند، بنابراین دستیابی به روشهای مناسب به منظور اتصال سایکلودکسترین برمبنای پیونددهی ترکیبی پلیمری برای اصلاح سطح سلولز حائز اهمیت می باشد. در این تحقیق، شناسایی اتصال مشتقی از بتاسایکلودکسترین به سطح سلولز با استفاده از روشهای شیمیایی، فیزیکی و دستگاهی انجام و مکانیزیم پیونددهی این مشتق سایکلودکسترین روی سلولز، مورد بررسی قرار گرفته است. به منظور پیونددهی این ترکیب روی پارچه پنبه ای، از پلاسما، برای فعال سازی سطح برای ایجاد رادیکالهای آزاد روی زنجیرههای سلولز استفاده شد. طبق نتایج به دست آمده، مشتق راکتیو بتاسایکلودکسترین قابلیت پیونددهی روی سلولز را داشته و در صورت استفاده از ماده ای واسط با این مشتق، راندمان پیونددهی پلیمریزاسیونی افزایش می یابد. با توجه به بررسیهای انجام شده مشاهده شد، اصلاح سطح پارچه پنبه ای از طریق پیونددهی مشتق سایکلودکسترین در شرایط مناسب، آسیبی به زنجیرهای سلولز در بدنه پلیمر وارد نمی کند، اگرچه بررسی رفتار و کارآیی پارچه از نظر استحکام و چروکپذیری در شرایط متفاوت فعالسازی سطح و پیونددهی، توجیه مکانیزیم های پیشنهادی را امکان پذیر می نماید.https://amnc.aut.ac.ir/article_148039_8ea7870cbbd15cd1ec75b0183debc029.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Synthesis and characterization of gold–silica core-shell nanoparticlesسنتز و مشخصه یابی نانوذرات هسته-پوسته طلا-سیلیس28382846149617amnc.2021.10.38.6FAسوسن رسولیدانشیار، گروه نانوفناوری رنگ، پژوهشگاه رنگJournal Article20211218In this paper, the preparation of nanoparticles core-shell of gold-silica was carried out by coating of citrated gold particles using the Stöber method and products were investigated by XRD, uv-visible and TEM. In this method, first the nanoparticles were synthesized and then the silica shell was obtained. The results showed that gold nanoparticles have been successfully synthesized and results of transmission electron microscopy showed a particle size of about 20 nm. Preparation of coated gold particles with silica is successfully performed and the results showed a thickness of the shell in order of about 35 nm. The results of the uv-visible spectroscopy of gold nanoparticles and core-shell structure indicate a strong peak at 520 nm, characteristic plasmon peak of the gold particles. However, this peak is more intense for the core-shell structure, which is due to the scattering effect of silica shell having a resonant impact on the peak intensity.در این طرح تهیه نانو ذرات هسته-پوسته طلا-سیلیکا از طریق پوشش دهی ذرات طلای پوشیده شده با سیترات با استفاده از روش استابر انجام شده و محصولات توسط XRD و uv-visible و TEM بررسی شدند. در این روش ابتدا نانوذرات طلا سنتز شده و سپس پوسته سیلیکا بدور آنها حاصل شد. نتایج نشان دادند که نانوذرات طلا با موفقیت سنتز شده و بررسی اندازه ذرات با میکروسکوپ الکترونی نشان دهنده اندازه ذراتی در حدود 20 نانومتر می باشد. لایه نشانی ذرات طلا با سیلیکا با موفقیت انجام شده و نتایج نشانه دهنده ضخامت حدود 35 نانومتر از سیلیکا بدور ذرات طلا می باشد. نتایج طیف سنجی نور مرئی و فرابنفش نانوذرات طلا و ساختار هسته-پوسته پیک شاخص در 520 نانومتر را نشان می دهد که شدت آن در مورد ساختار هسته-پوسته بیشتر می باشد که دلیل آن تاثیر ضریب شکست سیلیکا و اثر تقویت کننده پراکنش نور بر شدت پیک می باشد.https://amnc.aut.ac.ir/article_149617_f3d604978f472bf77ea907aacdcab596.pdfانجمن علمی رنگ ایرانمواد پیشرفته و پوشش های نوین2322-1356103820211122Synthesis and characterization of modified resorcinol formaldehyde aerogel as a novel absorbent to removing oxytetracycline from aqueuos solutionساخت و مشخصه یابی ایروژل رزورسینول فرمالدهید اصلاح شده به عنوان یک جاذب جهت حذف آنتی بیوتیک اکسی تتراسایکلین از محلول های آبی28482861149618amnc.2021.10.38.7FAعلیرضا بهزادیکارشناس ارشد، دانشکده مهندسی شیمی، دانشگاه تهران، تهران، ایرانقدرت الله هاشمی مطلقاستادیار، دانشکده مهندسی شیمی، دانشگاه تهران، تهران، ایران0000-0002-0588-2343هومن پژندکارشناس ارشد، پژوهشکده رنگ و پلیمر، دانشگاه صنعتی امیر کبیر، تهران، ایرانJournal Article20210602In recent years, concerns about the presence of drug compounds as part of emerging pollutants have been growing. In this study, we tried to make aerogels with a high specific surface area and use them to remove the antibiotic oxytetracycline. Similarly, the resorcinol formaldehyde organic aerogel was synthesized using the sol-gel method and ambient drying. The synthesized RF aerogel was modified by the incorporation of 1 wt.% of amine-functionalized graphene oxide (GOA) and Meta-phenylenediamine during the synthesis process to prepare RF-GOA1 and RF-PmPDA1., and finally the performance of all three samples as adsorbents under different parameters such as pH solution, initial concentation of antiobiotic, adsorbent dose and different contact times adsorbent with antibiotics was investigated. FTIR, RAMAN, XRD, FESEM, BET, CHN, EDS tests were used to characterize the samples and then the performance efficiency of the samples oxytetracycline antibiotic remove was investigated using UV-Vis spectroscopic test. The results of BET test showed that the highest specific surface area is related to RF aerogel containing 1 wt.% amine-functionalized GO (RF-GOA1) with 266 m2/g. Also, according to the results, the adsorption capacity in aerogel samples was RF, RF-GOA and RF-PmPDA1 were 386.6, 257.6 and 277.8 mg / g, and the removal rate of oxytetracycline was 51.5 ,77.3 and 70.1% obtained, respectively.در سالهای اخیر نگرانی از حضور ترکیبات دارویی به عنوان بخشی از آلایندههای نوظهور در حال افزایش است. در این مطالعه، سعی بر آن شد تا با ساخت ایروژلهایی با مساحت سطح ویژهی بالا از آنها جهت حذف آنتی بیوتیک اکسی تتراسایکلین استفاده گردد. به همین منطور، ایروژل آلی رزورسینول فرمالدهید با استفاده از روش سل-ژل تحت شرایط محیطی سنتز شد. در ادامهی فرآیند ایروژل های اصلاح شده با استفاده از دو مادهی 1٪ وزنی اکسید گرافن آمیندار شده و1٪ متا فنیلن دی آمین اصلاح گردید و نهایتا عملکرد هر سه نمونه به عنوان جاذب تحت پارامترهای مختلف از قبیل pH محلول(12-2)، غلظت اولیه آنتی بیوتیک (100-40 میلی گرم بر گرم)، مقدار جاذب (10-4 میلی گرم) و زمان تماس متفاوت جاذب با آنتی بیوتیک (24-3 ساعت) مورد ارزیابی قرار گرفت. جهت مشخصهیابی نمونههای ساخته شده از آزمونهای FTIR،RAMAN ، XRD، FESEM، BET، CHN، EDSاستفاده شد و سپس بازدهی عملکرد حذف آنتی بیوتیک اکسی تتراسایکلین نمونه های ساخته شده با استفاده از آزمون اسپکتروسکپی UV-Vis ارزیابی گردید. نتایج آزمون BET نشان داد که بیشترین مساحت سطح ویژه مربوط به نمونههای ایروژل رزورسینول فرمالدهید-1 درصد وزنی اکسید گرافن آمیندار شده (RF-GOA1) با میزان m2/g 266 است همچنین با توجه به نتایج مشخص شد که میزان ظرفیت جذب در نمونههای RF، RF-GOA وRF-PmPDA1 به ترتیب برابر با 6/386، 6/257و 8/277 میلی گرم بر گرم بوده و میزان حذف آنتی بیوتیک اکسی تتراسایکلین برای نمونههای ذکر شده به ترتیب برابر با 5/51، 3/77 و 1/70 ٪ می باشد.https://amnc.aut.ac.ir/article_149618_1cd33303197858e541d2556b8cca7dac.pdf