Novel protective coatings based on silane

Document Type : Research Article

/amnc.2012.1.3.4
Abstract
The paper intends to introduce innovations in the field of silane based coatings. Although the coatings are generally thin, they are able to provide a desirable corrosion protection. Hence, they could be taken into account as proper alternative for toxic chromate conversion coatings. In addition to protective action, silane layer can facilitate an excellent adhesion for the covering coating through covalent bonds. In spite of barrier properties, the coatings would fail to reveal active protection in case of introducing cracks or failures. Main aim of the paper is to introduce some novel approaches to improve protective performance of silane based coatings.
Keywords
Silane
Adhesion
Corrosion protection
Corrosion inhibitors
Nano-particles
[1]        Eichinger E, Osborne J, Cleave T V. Hexavalent chromium elimination: an aerospace industry progress report. Metal Finishing, 95, 1997, 95, 36.
[2]        W.J.van Ooij, D.Zhu, M.Stacy, A.Seth, T.Mugada, J.Gandhi, P.Puomi, corrosion Protection properties of Organofunctional Silanes—An Overview, TSINGHUA SCIENCE ANDTECHNOLOGY, 10, 2005, 639-664.
[3]        KONG Gang, LU Jintang, WU Haijiang, Post treatment of silane and ceriumsalt as chromate replacers on galvanized steel, journal of rare earths, 27, 2009, 164.
[4]        Fedel M, Thesis: Environmentally friendly hybrid coatings for corrosion protection: silane based pre-treatments and nanostructured waterborne coatings, Trento University, Italy, 2010.
[5]        DuhuaWang, Gordon. P.Bierwagen, Sol–gel coatings on metals for corrosion protection, Progress in Organic Coatings, 64, 2009, 327–338.
[6]        F.Deflorian, S.Rossi, M.Fedel, C.Motte, Electrochemical investigation of high-performance silane sol-gel films containing clay nanoparticles, Progress in Organic Coatings, 69, 2010, 158–166.
[7]        Vignesh Palanivel, Y.Huangb, W.J. van Ooij, Effects of addition of corrosion inhibitors to silane films on the performance of AA2024-T3 in a 0.5M NaCl solution, Progress in Organic Coatings, 53, 2005, 153–168.
[8]        Digambar Y.Nadargi, A.Venkateswara Rao, Methyltriethoxysilane: New precursor for synthesizing silica aerogels, Journal of Alloys and Compounds, 467, 2009, 397–404.
[9]        Sabata A, Knueppel B A, van Ooij W J, TOFSIMS study of cleaning procedures and silane surface treatments of steels, Testing and Evaluation, 23,1995- 120.
[10]      Ji-Ming Hu, Liang Liu, Jian-Qing Zhang, Chu-Nan Cao, Electrodeposition of silane films on aluminum alloys for corrosion protection, Progress in Organic Coatings, 58, 2007, 265–271.
[11]      Lian-Kui Wu, Liang Liu, Ji Li, Ji-Ming Hu, Jian-Qing Zhang, Chu-Nan Cao, Electrodeposition of cerium (III)-modified bis-[triethoxysilypropyl]tetra-sulphide films on AA2024-T3 (aluminum alloy) for corrosion protection, Surface & Coatings Technology, 204, 2010, 3920–3926.
[12]      Alka Phanasgaonkar, V.S. Raja, Influence of curing temperature, silica nanoparticles- and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steel, Surface & Coatings Technology, 203, 2009, 2260–2271.
[13]      I. De Graeve, J. Vereecken, A. Franquet, T. Van Schaftinghen, H. Terryn, Silane coating of metal substrates: Complementary use of electrochemical, optical and thermal analysis for the evaluation of film properties, Progress in Organic Coatings 59, 2007, 224–229.
[14]      I.De Graeve, E.Tourwe, M.Biesemans, R.Willem, H.Terryn, Silane solution stability and film morphology of water-based bis-1,2-(triethoxysilyl)ethane for thin-film deposition on aluminium, Progress in Organic Coatings, 63, 2008, 38–42.
[15]      A. Franquet,H. Terryn, P. Bertrand, J. Vereecken1, Use of optical methods to characterize thin silane films coated on aluminium, SURFACE AND INTERFACE ANALYSIS, 34, 2002, 25–29.
[16]      A.P.Romano, M.Fedel, F.Deflorian, M.G Olivier, Silane sol–gel film as pretreatment for improvement of barrier properties and filiform corrosion resistance of 6016 aluminium alloy covered by cataphoretic coating, Progress in Organic Coatings, 72, 2011, 695– 702.
[17]      A.Cabral, R.G.Duarte, M.F.Montemor, M.L.Zheludkevich, M.G.S.Ferreira, Analytical characterisation and corrosion behaviour of bis-[triethoxysilylpropyl]tetrasulphide pre-treated AA2024-T3, Corrosion Science, 47, 2005, 869–881.
[18]      Andre´s Pepe, Pablo Galliano, Mario Aparicio,  Alicia Dura´n, Silvia Cere´, Sol-gel coatings on carbon steel: Electrochemical evaluation, Surface & Coatings Technology, 200, 2006, 3486 – 3491.           
[19]      A. Franquet, J. De Laet, T. Schram, H. Terryn, V. Subramanian, W.J. van Ooij, J. Vereecken, Determination of the thickness of thin silane films on aluminium surfaces by means of spectroscopic ellipsometry, Thin Solid Films, 384, 2001, 37-45.
[20]      A. Franquet, H. Terryn, J. Vereecken, Composition and thickness of non-functional organosilane films coated on aluminium studied by means of infra-red spectroscopic ellipsometry, Thin Solid Films, 441, 2003, 76–84.
[21]      M. Mohseni, M. Mirabedini, M. Hashemi, G.E. Thompson, Adhesion performance of an epoxy clear coat on aluminum alloy in the presence of vinyl and amino-silane primers, Progress in Organic Coatings, 57, 2006, 307–313.
[22]      M.K. Harun, S.B. Lyon, J. Marsh, A surface analytical study of functionalized mild steel for adhesion promotion of organic coatings, Progress in Organic Coatings, 46, 2003, 21–27.
[23]      F. Deflorian, S. Rossi, L. Fedrizzi, M. Fedel, Integrated electrochemical approach for the investigation of silane pre-treatments for painting copper, Progress in Organic Coatings, 63, 2008, 338–344.
[24]      M. Fedel, M. Olivier, M. Poelman, F. Deflorian, S. Rossi, M.E. Druart, Corrosion protection properties of silane pre-treated powder coated galvanized steel, Progress in Organic Coatings, 66, 2009, 118–128.
[25]      A. Romano, M. Fedel, F. Deflorian, M. Olivier, Silane sol–gel film as pretreatment for improvement of barrier properties and filiform corrosion resistance of 6016 aluminium alloy covered by cataphoretic coating, Progress in Organic Coatings, 72, 2011, 695-702.
[26]      R.Z. Zand, A.E. Langroudi, A. Rahimi,Silica based organic–inorganic hybrid nanocomposite coatings for corrosion protection,Progress in organic coating, 53, 2005, 286–291.
[27]      Monica Trueba, Stefano P. Trasatti,Pyrrole-based silane primer for corrosion protection of commercial Al alloys. Part II. Corrosion performance in neutral NaCl solution, Progress in Organic Coatings, 66, 2009, 265–275.
[28]      Luis M. Palomino, Patrcia H. Suegama, Idalina V. Aoki, M.F. Montemor, Herclio G. De Melo, Electrochemical study of modified cerium–silane bi-layer on Al alloy 2024-T3, Corrosion Science, 51, 2009, 1238–1250.
[29]      P.H. Suegama a, H.G. de Melo a, A.A.C. Recco b, A.P. Tschiptschin b, I.V. Aoki, Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles, Surface & Coatings Technology, 202, 2008, 2850–2858.
[30]      Luis M. Palomino, Patrı'cia H. Suegama, Idalina V. Aoki, M. Fatima Montemor, Hercı´lio G. De Melo, Electrochemical study of modified non-functional bis-silane layers on Al alloy 2024-T3, Corrosion Science, 50, 2008, 1258–1266.
[31]      A. Frignani, F. Zucchi, G. Trabanelli, V. Grassi, Protective action towards aluminium corrosion by silanes with a long aliphatic chain, Corrosion Science, 48, 2006, 2258–2273.
[32]      M.F. Montemor, M.G.S. Ferreira, Analytical characterization of silane films modified with cerium activated nanoparticles and its relation with the corrosion protection of galvanised steel substrates, Progress in Organic Coatings, 63, 2008, 330–337.
[33]      M.F. Montemor, R. Pinto, M.G.S. Ferreira, Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticles, Electrochimica Acta, 54, 2009, 5179–5189.
[34]      P.H. Suegama, A.A.C. Recco, A.P. Tschiptschin, I.V. Aoki, Influence of silica nanoparticles added to an organosilane film on carbon steel electrochemical and tribological behaviour, Progress in Organic Coatings, 60, 2007, 90–98.
[35]      Vignesh Palanivel, Danqing Zhu, W. J. van Ooij, Nanoparticle-filled silane films as chromate replacements for aluminum alloys, Progress in Organic Coatings 47, 2003, 384–392.
[36]      I. De Graeve, J. Vereecken, A. Franquet, T. Van Schaftinghen, H. Terryn, Silane coating of metal substrates: Complementary use of electrochemical, optical and thermal analysis for the evaluation of film properties, Progress in Organic Coatings 59, 2007, 224–229.
[37]      F.Brusciotti, A.Batan, I.De Graeve, M.Wenkin, M.Biessemans, R.Willem, F.Reniers, J.J.Pireaux, M.Piens, J.Vereecken, H.Terryn, Characterization of thin water-based silane pre-treatments on aluminium with the incorporation of nano-dispersed CeO2 particles, Surface & Coatings Technology, 205, 2010, 603–613.
[38]      W. Trabelsi, P. Cecilio, M.G.S. Ferreira, M.F. Montemor, Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates, Progress in Organic Coatings, 54, 2005, 276–284.
 [39]     Vignesh Palanivel, Y.Huangb, W.J. van Ooij, Effects of addition of corrosion inhibitors to silane films on the performance of AA2024-T3 in a 0.5M NaCl solution, Progress in Organic Coatings, 53, 2005, 153–168.
[40]      XIAO Wei, MAN Ruilin, MIAO Chang, PENG Tianlan, Study on corrosion resistance of the BTESPT silane cooperating with rare earth cerium on the surface of aluminum-tube, journal of rare earths, 28, 2010, 117.
[41]      F. Zanotto, V. Grassi, A. Frignani, F. Zucchi, Protection of the AZ31 magnesium alloy with cerium modified silane coatings, Materials Chemistry and Physics, 129, 2011, 1– 8.
[42]      Luis M. Palomino, Patrı´cia H. Suegama, Idalina V. Aoki, M. Fatima Montemor,  Hercı´lio G. De Melo, Electrochemical study of modified non-functional bis-silane layers on Al alloy, 2024-T3, Corrosion Science, 50, 2008, 1258–1266.
[43]      Luis M. Palomino, Patrcia H. Suegama, Idalina V. Aoki, M.F. Montemor, Herclio G. De Melo, Electrochemical study of modified cerium–silane bi-layer on Al alloy 2024-T3, Corrosion Science, 51, 2009, 1238–1250.
[44]      Luis E.M. Palomino, Patricia H. Suegama, Idalina V. Aoki, Zolt´an P´aszti, Herc´ılio G. de Melo, Investigation of the corrosion behaviour of a bilayer cerium-silane pre-treatment on Al 2024-T3 in 0.1M NaCl, Electrochimica Acta, 52, 2007, 7496–7505.
[45]      Hongwei Shi, Fuchun Liu, Enhou Han, Corrosion behaviour of sol–gel coatings doped with cerium salts on 2024-T3 aluminum alloy, Materials Chemistry and Physics, 124, 2010, 291–297.
[46]      Heming Wang, Robert Akid, A room temperature cured sol–gel anticorrosion pre-treatment for Al 2024-T3 alloys, Corrosion Science, 49, 2007, 4491–4503.
[47]      P.H. Suegama a, H.G. de Melo a, A.A.C. Recco b, A.P. Tschiptschin b, I.V. Aoki, Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles, Surface & Coatings Technology, 202, 2008, 2850–2858.
[48]      Heming Wang, Robert Akid, Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol–gel coatings on mild steel, Corrosion Science, 50, 2008, 1142–1148.
[49]      Karine Joncoux-Chabrol, Jean-Pierre Bonino , Marie Gressier, Marie-Joëlle Menu, Nadine Pébère, Improvement of barrier properties of a hybrid sol–gel coating by incorporation of synthetic talc-like phyllosilicates for corrosion protection of a carbon steel, Surface & Coatings Technology, 206, 2012, 2884–2891.
[50]      M.G.Olivier, M.Fedel, V.Sciamanna, C.Vandermiers, C.Motte, M.Poelman, F.Deflorian, Study of the effect of nanoclay incorporation on the rheological properties and corrosion protection by a silane layer, Progress in Organic Coatings, 72, 2011, 15– 20.