[1] Wang D, Bierwagen G. P, Review Sol–gel coatings on metals for corrosion protection, Progress in Organic Coatings, 64, 2009, 327–338.
[2] Zandi Zand R, Verbeken K, Adriaens A, Corrosion resistance performance of cerium doped silica sol–gel coatings on 304L stainless steel, Progress in Organic Coatings, 75 ,2012, 463– 473.
[3] Pepe A, Aparicio M, Dur´an A, Cer´e S, Cerium hybrid silica coatings on stainless steel AISI 304 substrate, Journal of sol-gel science and technology, 39, 2006, 131–138.
[4] Phanasgaonkar A , Raja V.S, Influence of curing temperature, silica nanoparticles and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steel, Surface and Coatings Technology, 203, 2009, 2260–2271.
[5] Quinton J. S, Dastoor P. C, Characterizing the bonding mechanisms at silane-metal interfaces: A model system, Journal of Materials Science Letters, 18, 1999, 1833–1835.
[6] Motte C, Poelman M, Roobroeck A, Fedel M, Deflorian F, Olivier M.G, Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer, Progress in Organic Coatings, 74, 2012, 326–333.
[7] Trabelsi W, Triki E, Dhouibi L, Ferreira M.G.S, Zheludkevich M.L, Montemor M.F, The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates, Surface and Coatings Technology, 200, 2006, 4240–4250.
[8] Vasconcelos D.C.L, Carvalho J. A. N, Mantel M, Vasconcelos W.L, Corrosion resistance of stainless steel coated with sol-gel silica, Journal of Non-Crystalline Solids, 273, 2000, 135-139.
[9] Kong G, Lu J, Zhang Sh, Che Ch, Wu H, A comparative study of molybdate/silane composite films on galvanized steel with different treatment processes, Surface and Coatings Technology, 205, 2010, 545–550.
[10] Osterholtz F. D, Pohl E.R, Kinetics of the hydrolysis and condensation of organofunctionalalkoxysilanes: a review Journal of Adhesion Science and Technology, 6, 1992, 127-149.
[11] Hoikkanen M, Vippola M, Vuorinen J, Lepista T, Jussila P, Ali-Lyttyc H, Lampimki M, Valden M, Characterization of silane layers on modified stainless steel surfaces and related stainless steel–plastic hybrids, Applied Surface Science, 257, 2011, 9335–9346
[12] Chico B, Galv´an J.C, de la Fuente D, Morcillo M, Electrochemical impedance spectroscopy study of the effect of curing time on the early barrier properties of silane systems applied on steel substrates, Progress in Organic Coatings, 60, 2007, 45–53.
[13] Cabral A.M, Duarte R.G, Montemor M.F, Ferreira M.G.S, A comparative study on the corrosion resistance of AA2024-T3 substrates pre-treated with different silane solutions Composition of the films formed, Progress in Organic Coatings, 54, 2005, 322–331.
[14] Bajat J.B, Miškovic´-Stankovic´ V.B, Kacˇarevic´-Popovic´ Z, Corrosion stability of epoxy coatings on aluminum pretreated by vinyltriethoxysilane, Corrosion Science, 50, 2008, 2078–2084.
[15] Ji W, Hu J, Liu L, Zhang J. Q, Cao Ch.N, Improving the corrosion performance of epoxy coatings by chemical modification with silane monomers, Surface and Coatings Technology, 201, 2007, 4789–4795.
[16] نادری محمودی رضا، صارمی محسن، اسدی نجمه، پوشش های حفاظتی نوین بر پایه سیلان، نشریه علمی پژوهشی مواد پیشرفته و پوشش های نوین، 3، 1391، 193-204.
[17] Wua L.K, Zhang J.T, Hua J.M, Zhang J.Q, Improved corrosion performance of electrophoretic coatings by silane addition, Corrosion Science, 56, 2012, 58–66.
[18] Zandi Zand R, Verbeken K, Adriaens A, Electrochemical Assessment of the Self-Healing Properties of Cerium Doped Sol-Gel Coatings on 304L Stainless Steel Substrates, International Journal of Electrochemistry Science, 7, 2012, 9592–9608.
[19] Gandhi J.S, Metroke T.L, Eastman M.A, van Ooij W.J, Apblett A, Effect of the Degree of Hydrolysis and Condensation of Bis-[Triethoxysilylpropyl] Tetrasulfi de on the Corrosion Protection of Coated Aluminum Alloy 2024-T3, corrosion, 62, 2006, 612- 623.
[20] Chico B, de la Fuente D, Pe´ rez M. L, Morcillo M, Corrosion resistance of steel treated with different silane/paint Systems, Journal of Coatings Technology Research, 9, 2012, 3–13.
[21] Metroke T.L, Kachurina O, Knobbe E.T, Spectroscopic and corrosion resistance characterization of GLYMO–TEOS Ormosil coatings for aluminum alloy corrosion inhibition, Progress in Organic Coatings, 44, 2002, 295-305.
[22] Asadi N, Naderi R, Saremi M, Arman S. Y, Fedel M, Deflorian F, Study of corrosion protection of mild steel by eco-friendly silane sol–gel coating, Journal of sol-gel science and technology, 70, 2014, 329-338.
[23] Conde A, Durán A , de Damborenea J.J, Polymeric sol–gel coatings as protective layers of aluminium alloys, Progress in Organic Coatings, 46, 2003, 288–296.
[24] اسدی نجمه، پایان نامه کارشناسی ارشد، تعیین میزان بهینه ی نانوذرات کلی (clay) در پوشش سیلان سل-ژل جهت بهبود مقاومت به خوردگی، دانشگاه تهران، ایران، 1392.
[25] David R, Tambe S.P, Singh S.K, Raja V.S, Dhirendra Kumar, Thermally sprayable grafted LDPE/nanoclay composite coating for corrosion protection, Surface and Coatings Technology, 205, 2011, 5470–5477.
[26] Kartsonakis I.A, Koumoulos E.P, Balaskas A.C, Pappas G.S, Charitidis C.A, Kordas G.C, Hybrid organic–inorganic multilayer coatings including nanocontainers for corrosion protection of metal alloys, Corrosion Science, 57, 2012, 56–66.
[27] Zandi Zand R, Verbeken K, Flexer V, Adriaens A, Effects of ceria nanoparticle concentrations on the morphology and corrosion resistance of ceriumesilane hybrid coatings on electrogalvanized steel substrates, Materials Chemistry and Physics, 145, 2014, 450-460.
[28] Allie L, Thorn J, Aglan H, Evaluation of nanosilicate filled poly (vinyl chloride-co-vinyl acetate) and epoxy coatings, Corrosion Science, 50, 2008, 2189–2196.
[29] Wang X , Li G, Li A, Zhang Z, Influence of thermal curing on the fabrication and properties of thin organosilane films coated on low carbon steel substrates, Journal of Materials Processing Technology, 186, 2007, 259–264.
[30] Brusciotti F, Batan A , De Graeve I, Wenkin M, Biessemans M, Willem R, Reniers F, Pireaux J.J, Piens M, Vereecken J, Terry H, Characterization of thin water-based silane pre-treatments on aluminium with the incorporation of nano-dispersed CeO2 particles, Surface and Coatings Technology, 205, 2010, 603–613.