Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method

Document Type : Research Article

Authors
1 Department of Polymer Engineering, South Tehran Branch, Islamic Azad University. Tehran. Iran.
2 Department of Polymer Engineering, South Tehran Branch, Islamic Azad University. Tehran.Iran.
3 nanotechnology Institute, Amirkabir university technology, Tehran, Iran
4 Department of Polymer Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
amnc.2022.10.40.3
Abstract
The production of nanofiber composite as a blend of natural and synthetic polymers has received much attention in recent years.These new and advanced biomaterials are widely used in the field of biomedicine, especially drug release systems, wound dressings,tissue engineering, etc.In this research work, starch and PVA blend nanofibers were produced by electrospinning method.In fact, due to the hard processability of starch, polyvinyl alcohol was used as a processing aid.Considering the poor mechanical properties and the possibility of using these nanofibers in aqueous environments and the issue of their solubility, different cross-linking operations on starch/PVA hydrophilic nanofibers including heat,genipin,citric acid soluble in water,citric acid soluble in ethyl acetate and glutaraldehyde is investigated here.In order to ensure the achievement of the nanoscale and accurate measurement of the diameter of nanofibers,morphological images by means of a scanning electron microscope (SEM) and identification of the produced nanofibers by Fourier Transform Infrared Spectroscopy(FTIR) and X-ray Diffraction(XRD) was evaluated.Thermal stability of nanofibers before and after cross-linking was performed by thermal gravimetric analysis(TGA).Examination of morphological properties showed that fibers with uniform diameter and random arrangement were produced.With the addition of starch, a decrease in fiber diameter was observed.The results of FTIR spectroscopy and XRD studies show the proper interaction between the two polymer components and the cross-linking agent. The results obtained from solubility and TGA showed that nanofibers networked with glutaraldehyde have the highest structural stability. Finally, the results of this research indicate that Starch/PVA(GA)nanofibers will have the potential to be used in the field of biomedicine.
Keywords

[1] Rivero G, Ana A, et al, Nanocomposite electrospun micro/nanofibers for biomedical applications, Materials for Biomedical Engineering: Biopolymer Fibers, 2019 (89-126).
[2] Wang  Ch, Wang Ju, et al, Fabrication of Electrospun Polymer Nanofibers with
Diverse Morphologies, Molecules 2019, 24, 834.
[3] Gizaw  M, Thompson J, et al, Electrospun Fibers as a Dressing Material for Drug
and Biological Agent Delivery in Wound Healing Applications, Bioengineering 2018, 5, 9.
[4] Haider   A, et al, A comprehensive review summarizing the effect of electrospinning parameters and potential applications of nanofibers in biomedical and biotechnology, Arabian Journal of Chemistry, 2015. 11.015.
[5] Liu M, Duan X, et al, Electrospun nanofibers for wound healing, Materials Science & Engineering C, 2017.03.034.
[6] Lipo L.S, Rahman M, Electrospinning and Electrospun Nanofibers, World Journal of Nano Science and Engineering, 2016, 6, 45-50.
[7] Kong B, et al, Tailoring micro/nano-fibers for biomedical applications, Bioactive Materials 19 (2023) 328–347.
[8] Adamu B.F, et al, A review of medicinal plant-based bioactive electrospun nano fibrous wound dressings, Materials & Design 209 (2021) 109942.
[9] Kamoun E.A, et al, Recent advances in PVA-polysaccharide based hydrogels and electrospun nanofibers in biomedical applications: A review, International Journal of Biological Macromolecules 187 (2021) 755–768.
[10] Ahmed A , et al, In-vitro and in-vivo study of superabsorbent PVA/Starch/g-C3N4/Ag@TiONPs hydrogel membranes for wound dressing ,European Polymer Journal 130 (2020) 109650.
[11] Waghmare V.S, et al, Starch based nanofibrous scaffolds for wound healing applications, Bioactive Materials xxx (2017) 1-12.
[12] Das A, et al, Optimality of poly-vinyl alcohol/starch/glycerol/citric acid in wound
dressing applicable composite films, International Journal of Biological Macromolecules 155 (2020) 260–272.
[13] Rabiu Salihu R, eta al, Catalyst-Free Crosslinking Modification of Nata-De-Coco-Based Bacterial Cellulose Nano, research square, 2021, 10.21203.
[14] Nataraj D, et al, Crosslinking electrospun poly (vinyl) alcohol fibers with citric acid to impart aqueous stability for medical applications, European Polymer Journal 124 (2020) 109484.
[15] L. Wen L, et al, Design of multifunctional food packaging films based on carboxymethyl chitosan/polyvinyl alcohol crosslinked network by using citric acid
as crosslinker, Polymer 230 (2021) 124048.
[16] Salihu R, et al, Citric acid: A green cross-linker of biomaterials for biomedical applications, European Polymer Journal 146 (2021) 110271.
[17] Truong Y.B, et al, Functional Cross-Linked Electrospun Polyvinyl Alcohol Membranes and Their Potential Applications, Macromol. Mater. Eng. 2017, 302, 1700024.
[18] Merk M, et al, 3D PCL/Gelatin/Genipin Nanofiber Sponge as Scaffold for
Regenerative Medicine,  Materials 2021, 14, 2006.
[19] Ching K.Y, et al, Genipin crosslinked chitosan/PEO nanofibrous scaffolds exhibiting an improved microenvironment for the regeneration of articular cartilage, Journal of Biomaterials Applications, 2021,1-14.
[20] Frohbergh M.E, et al, Electrospun hydroxyapatite-containing chitosan nanofibers crosslinked with genipin for bone tissue engineering, Biomaterials 33 (2012) 9167-9178.
[21] Aramwit P, et al. Formulation and characterization of silk sericin–PVA scaffold
crosslinked with genipin, international Journal of Biological Macromolecules 47 (2010) 668–675.
[22] Destaye A.G, et al, Glutaraldehyde Vapor Cross-linked Nanofibrous PVA Mat with in Situ Formed Silver Nanoparticles, ACS Applied Materials & Interfaces, 2010.10.1021.
[23] Wang W, et al, Effect of Vapor-Phase Glutaraldehyde Crosslinking on
Electrospun Starch Fibers, Carbohydrate Polymers, 2015.12.061.
[24] Campiglio Ch.E, et al, Cross-Linking Optimization for Electrospun Gelatin:
Challenge of Preserving Fiber Topography polymers 2020, 12,2472.
[25] Marta A. Teixeira M.A, et al, Green Optimization of Glutaraldehyde Vapor-Based
Crosslinking on Poly(Vinyl Alcohol)/Cellulose Acetate  Electrospun Mats for Applications as Chronic Wound Dressings, Proceedings 2021, 69, 30.
[26] Nasikhudin et al ,Stabilization of PVA/Chitosan/TiO2 Nanofiber Membrane with Heat Treatment and Glutaraldehyde Crosslink, Materials Science and Engineering 367 (2018) 012004.
[27] Long Bi, et al, Effects of different cross-linking conditions on the properties
of genipin-cross-linked chitosan/collagen scaffolds for cartilage tissue engineering, J Mater Sci: Mater Med (2011) 22:51–62.
 [28] Kong L, Ziegler G.R, Quantitative relationship between electrospinning parameters and starch fiber
diameter, Carbohydrate Polymers 92 (2013) 1416–1422.
[29] Yang Sh, Zhang X, Zhang D, Electrospun Chitosan/Poly (Vinyl Alcohol)/Graphene
Oxide Nanofibrous Membrane with Ciprofloxacin Antibiotic Drug for Potential Wound Dressing Application, Int. J. Mol. Sci. 2019, 20, 4395.