Combination of weld cladding and Carburization treatment to Reconstruction of Industrial Parts of DIN-25CrMo4 Steel

Document Type : Research Article

Authors

1 yazd university

2 Associate Professor/ Materials Engineering group, faculty of mining and metallurgy, yazd university

/amnc.2018.7.25.6

Abstract

In the present study, the combination of cladding and carburization process for reconstructing of gears made of DIN - 25CrMo4 steel was evaluated. Therefore, at fist weld cladding was carried out by using E - 7018-1 basic electrode to compensate the lost thickness. Subsequently, the cladded specimens was subjected to carburization process to increase the hardness and wear resistance of the coating. Microstructural and phase studies indicated that ferrite microstructure of base metal converted to the martensite accompanied with residual austenite and Fe-C carbides such as Fe3C that increased surface hardness ~300. Wear evaluations indicated significant improvement of wearing resistance of carbonized specimens (80% reduction in friction coefficient and 90% reduction in lost weight).the microscopy SEM study of worn surfaces implying a change in the wear mechanism from the two-body scrub bing wear to the cutting mechanism by increasing the volume fraction of the martensitic phase in the carbonized specimens.

Keywords

Main Subjects

References

 
[1] Sapate, S. G., and A. V. RamaRao. "Erosive wear behaviour of weld hardfacing high chromium cast irons: effect of erodent particles." Tribology International 39, no. 3 (2006): 206-212.
[2] de Melo, Anderson CA, Júlio César G. Milan, Márcio B. da Silva, and Álisson R. Machado. "Some observations on wear and damages in cemented carbide tools." Mechanical Sciences and Engineering 28, no. 3 (2006): 269-277..
[3] Spittel, M., and T. Spittel. "Steel symbol/number: 25CrMo4/1.7218." Metal Forming Data of Ferrous Alloys-deformation behavior "Springer, Berlin, Heidelberg 32, (2009): 1038-1043.
[4] رحیمی، ا. "تعمیر ابزارها و قالب‌های تحت سایش"، انتشارات جهان جام جم، چاپ اول، ص ص 112-113، سال 1393.
[5] کامنیچینی، ای. ر، شکری،"کاربرد و عملیات حرارتی فولادها" مرکز نشر دانشگاهی، ص ص 153-155، سال 1366.
[6] تامسون، ا. رحیمی، ا. "تعمیر ابزارها و قالب‌های تحت سایش به روش جوشکاری با گاز محافظ (MIG,MAG,TIG)" انتشارات جام جم، ص ص 241-243، سال 1393.
[7] Kirchgaßner, M., Badisch, E., & Franek, F. (2008). Behaviour of iron-based hardfacing alloys under abrasion and impact. Wear, 265(5-6), 772-779..
[8] Handbook, AWS Welding. "Welding Processes–Arc and Gas Welding and Cutting, Brazing, and Soldering." Miami: American Welding Society, vol. 7, pp. 235-241, 2008
[9] علمی حسینی، ر. خسروی، ح."بررسی تاثیر مقدارکربنات سدیم به عنوان ماده انرژی‌زا بر عمق لایه کربوره فولاد کم کربن l.5920 "، فصل نامه علمی پژوهشی مهندسی مواد مجلسی، سال 3، شماره 3، ص ص 45-37، پاییز 1388
[10] علمی حسینی، ر. خسروی، ح. قادری، ا."بررسی تاثیر هوای اضافی و فعال ساز بر عمق سختی در فرآیند کربن‌دهی جامد فولاد DIN 18CrNi8"، فصل نامه علمی پژوهشی مهندسی مواد مجلسی، سال 3، شماره 4، ص ص 74-66زمستان، 1388
[11] Selvi, S., S. P. Sankaran, and R. Srivatsavan. "Comparative study of hardfacing of valve seat ring using MMAW process." Journal of materials Processing technology 207, no. 1-3 (2008): 356-362.
[12] عظیمی، ق.شمعانیان، م."روکش کاری فولاد ساده کربنی با الکترودهای پرکروم، وارزیابی ریزساختارو رفتار سایشی روکش". فصل نامه علوم مهندسی سطح، سال 4، شماره 6، ص ص82-75، زمستان 1387.
[13] Coronado, John J., Holman F. Caicedo, and Adolfo L. Gómez. "The effects of welding processes on abrasive wear resistance for hardfacing deposits." Tribology International 42, no. 5 (2009): 745-749.
[14] Mendez, Patricio F., Nairn Barnes, Kurtis Bell, Steven D. Borle, Satya S. Gajapathi, Stuart D. Guest, Hossein Izadi, Ata Kamyabi Gol, and Gentry Wood. "Welding processes for wear resistant overlays." Manufacturing Processes 16, no. 1 (2014): 4-25
[15] Wang, X. H., F. Han, X. M. Liu, S. Y. Qu, and Z. D. Zou. "Effect of molybdenum on the microstructure and wear resistance of Fe-based hardfacing coatings." Materials Science and Engineering: A 489, no. 1-2 (2008): 193-200.
 

Files

Share

How to cite

Statistics